Need help?

EN 12621:2006 +A1:2010 Standard

wave
Save  

  Keywords:

#equipment #machinery #european #standard #see

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Thursday 2nd of April 2020

  Description:

Machinery for the supply and circulation of coating materials under pressure - Safety requirements

  Purpose

1.1 This European Standard applies to the design and construction of machinery for the supply and circulation of coating and/or auxiliary materials under pressure – in the following called "machine" (see 3.1). The coating material is supplied by air pressure or airless. NOTE Machines covered by this European Standard may be linked with e.g. colour mixing machinery, atomising and spraying equipment, spray booths and stands and/or automated coating machinery. The pressure related parts of the machines covered are classified as no higher than category I under article 9 of the Pressure Equipment Directive 97/23/EC. This European Standard deals with the significant hazards, hazardous situations and events relevant to the machinery for the supply and circulation of coating and/or auxiliary materials under pressure, when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). Machinery for the supply and circulation of coating and/or auxiliary materials under pressure consists of the following equipment: - pump units; - pressure vessels; - non-pressurised containers; - interconnecting pipes and hoses - flanges, nozzles, couplings, supports, lifting equipment etc.; - agitators; - filters; - pulsation damping devices; - all safety devices (e.g. level monitoring equipment); - equipment for heating and/or cooling of the coating materials. The machine may be fixed or mobile. 1.2 This European Standard excludes: - pressure related hazards of equipment classified as higher than category 1 under article 9 of the Pressure Equipment Directive 97/23/EC; - atomising and spraying equipment as dealt with in EN 1953:1998 and the supply hoses for this equipment; - atomising and spraying equipment as dealt with in EN 50144-2-7:2001, EN 50260-2-7:2002 and the supply hoses for this equipment. 1.3 This European Standard does not apply to: - machinery for processing of foodstuffs and pharmaceuticals;- design and construction of pipes and hoses; - design and construction of coating presses (see 3.23); - machinery for the supply of powder coating material. 1.4 This European Standard is not applicable to machinery for the supply and circulation of coating materials under pressure which are manufactured before the date of publication of this document by CEN.

  Publication

Friday 9th of March 2018

  Amendment

This standard is an amendment for "EN 12621:2006"

  Related Standards

EN 1005-2:2003 +A1:2008

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery

EN 16307-5:2013

Machinery (MD) Directive (2006/42/EC)

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requirements for pedestrian-propelled trucks

EN 16230-1:2013 +A1:2014

Machinery (MD) Directive (2006/42/EC)

Leisure karts - Part 1: Safety requirements and test methods for karts

EN ISO 16230-1:2015

Machinery (MD) Directive (2006/42/EC)

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General ...

EN ISO 16231-1:2013

Machinery (MD) Directive (2006/42/EC)

Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013)

EN ISO 16231-2:2015

Machinery (MD) Directive (2006/42/EC)

Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (I...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 12621:2006 +A1:2010 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0