Need help?

EN ISO 11737-2:2020 Standard

wave
Save  

  Keywords:

#tests #product #test #sterile #microorganisms

  Directive

In vitro diagnostic medical devices Regulation ((EU) 2017/746)

  Last Official Journal reference

Monday 15th of June 2026

  Description:

Sterilization of health care products - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2019)

  Purpose

ISO 11737-2 specifies the general criteria for tests of sterility on medical devices. These tests are intended to be performed when defining, validating or maintaining a sterilization process. A sterile medical device is free from viable microorganisms. Medical devices can, before sterilization, have microorganisms on them. Which means such products are non-sterile. The purpose of sterilization is to inactivate the microbiological contaminants. The standards for quality management systems recognise that, for certain processes used in manufacturing, the effectiveness of the process cannot be fully verified by subsequent inspection and testing of the product. Sterilization is an example of such a process. For this reason, sterilization processes are validated for use, the performance of the sterilization process is monitored routinely and the equipment is maintained. ISO 11737-2 gives guidance on tests of sterility performed in the validation and maintenance of a sterilization process. It is not meant to be used for sterility testing for routine release of a product that has been subjected to a sterilization process, performing a test for sterility test of sterility or test for sterility for demonstration of product shelf life, stability or package integrity or culturing of biological indicators or inoculated products. The international standard has been approved in Europe as EN ISO 11737-2:2020 without any changes and it supersedes EN ISO 11737-2:2009.

  Publication

Tuesday 20th of July 2021

  Related Standards

EN ISO 11135:2014/A1:2019

In vitro diagnostic medical devices Regulation ((EU) 2017/746)

Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a ste...

EN ISO 17511:2021

In vitro diagnostic medical devices Regulation ((EU) 2017/746)

In vitro diagnostic medical devices - Requirements for establishing metrological traceability of values assigned to calibrators, t...

EN ISO 18113-1:2024

In vitro diagnostic medical devices Regulation ((EU) 2017/746)

In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions, and gener...

EN ISO 11135:2014

In vitro diagnostic medical devices Regulation ((EU) 2017/746)

Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a ste...

EN ISO 17665:2024

In vitro diagnostic medical devices Regulation ((EU) 2017/746)

Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterili...

EN 556-1:2024

In vitro diagnostic medical devices Regulation ((EU) 2017/746)

Sterilization of medical devices - Requirements for medical devices to be designated "STERILE" - Part 1: Requirements for terminal...

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0