Need help?

List of harmonised standards

  EN 50360:2017

Product standard to demonstrate the compliance of wireless communication devices, with the...

  EN 50385:2017

Product standard to demonstrate the compliance of base station equipment with radiofrequen...

  EN 50401:2017

Product standard to demonstrate the compliance of base station equipment with radiofrequen...

  EN 50566:2017

Product standard to demonstrate the compliance of wireless communication devices with the ...

  EN 55035:2017

Electromagnetic compatibility of multimedia equipment - Immunity requirements

  EN 300 065 V2.1.2

Narrow-band direct-printing telegraph equipment for receiving meteorological or navigation...

  EN 300 086 V2.1.2

Land Mobile Service; Radio equipment with an internal or external RF connector intended pr...

  EN 300 113 V2.2.1

Land Mobile Service; Radio equipment intended for the transmission of data (and/or speech)...

  EN 300 219 V2.1.1

Land Mobile Service; Radio equipment transmitting signals to initiate a specific response ...

  EN 300 220-2 V3.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 2: Ha...

  EN 300 220-3-1 V2.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-1: ...

  EN 300 220-3-2 V1.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 3-2: ...

  EN 300 220-4 V1.1.1

Short Range Devices (SRD) operating in the frequency range 25 MHz to 1 000 MHz; Part 4: Ha...

  EN 300 224 V2.1.1

Land Mobile Service; Radio Equipment for use in a Paging Service operating within the freq...

  EN 300 224-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); On-site paging service; Pa...

  EN 300 296 V2.1.1

Land Mobile Service; Radio equipment using integral antennas intended primarily for analog...

  EN 300 328 V2.1.1

Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM ba...

  EN 300 330 V2.1.1

Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and indu...

  EN 300 341 V2.1.1

Land Mobile Service; Radio equipment using an integral antenna transmitting signals to ini...

  EN 300 390 V2.1.1

Land Mobile Service; Radio equipment intended for the transmission of data (and speech) an...

  EN 300 422-1 V2.1.2

Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Class A Receivers; Harmonised Standa...

  EN 300 422-2 V2.1.1

Wireless Microphones; Audio PMSE up to 3 GHz; Part 2: Class B Receivers; Harmonised Standa...

  EN 300 422-3 V2.1.1

Wireless Microphones; Audio PMSE up to 3 GHz; Part 3: Class C Receivers; Harmonised Standa...

  EN 300 422-4 V2.1.1

Wireless Microphones; Audio PMSE up to 3 GHz; Part 4: Assistive Listening Devices includin...

  EN 300 433 V2.1.1

Citizens' Band (CB) radio equipment; Harmonised Standard covering the essential requiremen...

  EN 300 440 V2.1.1

Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency ran...

  EN 300 440-2 V1.4.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio...

  EN 300 454-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wide band audio links; Par...

  EN 300 487 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Receive-Only Mobile Ea...

  EN 300 674-2-2 V2.1.1

Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmi...

  EN 300 676-2 V2.1.1

Ground-based VHF hand-held, mobile and fixed radio transmitters, receivers and transceiver...

  EN 300 698 V2.1.1

Radio telephone transmitters and receivers for the maritime mobile service operating in th...

  EN 300 698 V2.2.1

Radio telephone transmitters and receivers for the maritime mobile service operating in th...

  EN 300 718-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmi...

  EN 300 718-2 V2.1.1

Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 2: Harmonised S...

  EN 300 718-3 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmi...

  EN 300 720 V2.1.1

Ultra-High Frequency (UHF) on-board vessels communications systems and equipment; Harmonis...

  EN 301 025 V2.1.1

VHF radiotelephone equipment for general communications and associated equipment for Class...

  EN 301 025 V2.2.1

VHF radiotelephone equipment for general communications and associated equipment for Class...

  EN 301 091-2 V1.3.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road ...

  EN 301 166 V2.1.1

Land Mobile Service; Radio equipment for analogue and/or digital communication (speech and...

  EN 301 178 V2.2.2

Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile servic...

  EN 301 357 V2.1.1

Cordless audio devices in the range 25 MHz to 2 000 MHz; Harmonised Standard covering the ...

  EN 301 357-2 V1.4.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Cordless audio devices in ...

  EN 301 360 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive ...

  EN 301 406 V2.2.2

Digital Enhanced Cordless Telecommunications (DECT); Harmonised Standard covering the esse...

  EN 301 426 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Low data rate Land Mob...

  EN 301 427 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for low data rate Mobile s...

  EN 301 428 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Te...

  EN 301 430 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite News Gatheri...

  EN 301 441 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations ...

  EN 301 442 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for NGSO Mobile Earth Stat...

  EN 301 443 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Te...

  EN 301 444 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Land Mobile Earth Stat...

  EN 301 447 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Statio...

  EN 301 459 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Satellite Interactive ...

  EN 301 473 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Aircraft Earth Station...

  EN 301 502 V12.5.2

Global System for Mobile communications (GSM); Base Station (BS) equipment; Harmonised Sta...

  EN 301 511 V9.0.2

Global System for Mobile communications (GSM); Harmonized EN for mobile stations in the GS...

  EN 301 511 V12.5.1

Global System for Mobile communications (GSM); Mobile Stations (MS) equipment; Harmonised ...

  EN 301 559 V2.1.1

Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI) and associated Perip...

  EN 301 598 V1.1.1

White Space Devices (WSD); Wireless Access Systems operating in the 470 MHz to 790 MHz TV ...

  EN 301 681 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations ...

  EN 301 721 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations ...

  EN 301 783 V2.1.1

Commercially available amateur radio equipment; Harmonised Standard covering the essential...

  EN 301 839 V2.1.1

Ultra Low Power Active Medical Implants (ULP-AMI) and associated Peripherals (ULP-AMI-P) o...

  EN 301 841-3 V2.1.1

VHF air-ground Digital Link (VDL) Mode 2; Technical characteristics and methods of measure...

  EN 301 842-5 V2.1.1

VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and me...

  EN 301 893 V1.8.1

Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN coverin...

  EN 301 893 V2.1.1

5 GHz RLAN; Harmonised Standard covering the essential requirements of article 3.2 of Dire...

  EN 301 908-1 V11.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-2 V11.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-2 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-3 V11.1.3

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-10 V4.2.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeat...

  EN 301 908-11 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-12 V7.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-13 V11.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-13 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-14 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-15 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-18 V11.1.2

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-19 V6.3.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-20 V6.3.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-21 V6.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 908-22 V6.1.1

IMT cellular networks; Harmonised Standard covering the essential requirements of article ...

  EN 301 929 V2.1.1

VHF transmitters and receivers as Coast Stations for GMDSS and other applications in the m...

  EN 302 017 V2.1.1

Transmitting equipment for the Amplitude Modulated (AM) sound broadcasting service; Harmon...

  EN 302 018 V2.1.1

Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Harmon...

  EN 302 018-2 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for...

  EN 302 054 V2.1.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz freque...

  EN 302 054 V2.2.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz freque...

  EN 302 054-2 V1.2.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz freque...

  EN 302 064-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL)...

  EN 302 065-1 V2.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard cove...

  EN 302 065-2 V2.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard cove...

  EN 302 065-3 V2.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard cove...

  EN 302 065-4 V1.1.1

Short Range Devices (SRD) using Ultra Wide Band technology (UWB); Harmonised Standard cove...

  EN 302 066-2 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Ground- and Wall- Probing ...

  EN 302 077-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for...

  EN 302 186 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite mobile Aircr...

  EN 302 194-2 V1.1.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); Navigation radar used on i...

  EN 302 195 V2.1.1

Short Range Devices (SRD); Ultra Low Power Active Medical Implants (ULP-AMI) and accessori...

  EN 302 208 V3.1.1

Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with pow...

  EN 302 217-2 V3.1.1

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and ant...

  EN 302 217-2-2 V2.2.1

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and ant...

  EN 302 245-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for...

  EN 302 248 V2.1.1

Navigation radar for use on non-SOLAS vessels; Harmonised Standard covering the essential ...

  EN 302 264-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road ...

  EN 302 288-2 V1.6.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road ...

  EN 302 296-2 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for...

  EN 302 326-2 V1.2.2

Fixed Radio Systems; Multipoint Equipment and Antennas; Part 2: Harmonized EN covering the...

  EN 302 340 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for satellite Earth Statio...

  EN 302 372 V2.1.1

Short Range Devices (SRD); Tank Level Probing Radar (TLPR) equipment operating in the freq...

  EN 302 448 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for tracking Earth Station...

  EN 302 454 V2.1.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz fre...

  EN 302 454-2 V1.2.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz fre...

  EN 302 480 V2.1.2

Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard covering the e...

  EN 302 502 V2.1.1

Wireless Access Systems (WAS); 5,8 GHz fixed broadband data transmitting systems; Harmonis...

  EN 302 510-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Radio equipment in the fre...

  EN 302 536-2 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);...

  EN 302 537 V2.1.1

Ultra Low Power Medical Data Service (MEDS) Systems operating in the frequency range 401 M...

  EN 302 561 V2.1.1

Land Mobile Service; Radio equipment using constant or non-constant envelope modulation op...

  EN 302 567 V1.2.1

Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmoniz...

  EN 302 571 V2.1.1

Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 5 855 ...

  EN 302 574-1 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations ...

  EN 302 574-2 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations ...

  EN 302 574-3 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations ...

  EN 302 608 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);...

  EN 302 609 V2.1.1

Short Range Devices (SRD); Radio equipment for Euroloop railway systems; Harmonised Standa...

  EN 302 617-2 V2.1.1

Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical m...

  EN 302 686 V1.1.1

Intelligent Transport Systems (ITS); Radiocommunications equipment operating in the 63 GHz...

  EN 302 729 V2.1.1

Short Range Devices (SRD); Level Probing Radar (LPR) equipment operating in the frequency ...

  EN 302 752 V1.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Active radar target enhanc...

  EN 302 858-2 V1.3.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic...

  EN 302 885 V2.1.1

Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile servic...

  EN 302 885 V2.2.2

Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile servic...

  EN 302 885 V2.2.3

Portable Very High Frequency (VHF) radiotelephone equipment for the maritime mobile servic...

  EN 302 961 V2.1.2

Maritime Personal Homing Beacon intended for use on the frequency 121,5 MHz for search and...

  EN 302 977 V2.1.1

Satellite Earth Stations and Systems (SES); Harmonised Standard for Vehicle-Mounted Earth ...

  EN 303 039 V2.1.2

Land Mobile Service; Multichannel transmitter specification for the PMR Service; Harmonise...

  EN 303 084 V2.1.1

Ground Based Augmentation System (GBAS) VHF ground-air Data Broadcast (VDB); Technical cha...

  EN 303 098 V2.1.1

Maritime low power personal locating devices employing AIS; Harmonised Standard covering t...

  EN 303 132 V1.1.1

Maritime low power VHF personal locating beacons employing Digital Selective Calling (DSC)...

  EN 303 135 V2.1.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Coastal Surveillance, Vess...

  EN 303 203 V2.1.1

Short Range Devices (SRD); Medical Body Area Network Systems (MBANSs) operating in the 2 4...

  EN 303 204 V2.1.2

Network Based Short Range Devices (SRD); Radio equipment to be used in the 870 MHz to 876 ...

  EN 303 213-6-1 V2.1.1

Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standa...

  EN 303 276 V1.1.1

Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 88...

  EN 303 339 V1.1.1

Broadband Direct Air-to-Ground Communications; Equipment operating in the 1 900 MHz to 1 9...

  EN 303 340 V1.1.2

Digital Terrestrial TV Broadcast Receivers; Harmonised Standard covering the essential req...

  EN 303 354 V1.1.1

Amplifiers and active antennas for TV broadcast reception in domestic premises; Harmonised...

  EN 303 372-1 V1.1.1

Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmo...

  EN 303 372-2 V1.1.1

Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Harmo...

  EN 303 402 V2.1.2

Maritime mobile transmitters and receivers for use in the MF and HF bands; Harmonised Stan...

  EN 303 406 V1.1.1

Short Range Devices (SRD); Social Alarms Equipment operating in the frequency range 25 MHz...

  EN 303 413 V1.1.1

Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) rece...

  EN 303 609 V12.5.1

Global System for Mobile communications (GSM); GSM Repeaters; Harmonised Standard covering...

  EN 303 978 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobi...

  EN 303 979 V2.1.2

Satellite Earth Stations and Systems (SES); Harmonised Standard for Earth Stations on Mobi...

  EN 305 550-2 V1.2.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD);...

  EN 617:2001/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for the equipment ...

  EN 618:2002/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 619:2002/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 620:2002/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt con...

  EN 1155:1997

Building hardware - Electrically powered hold-open devices for swing doors - Requirements ...

  EN 1155:1997/A1:2002

Building hardware - Electrically powered hold-open devices for swing doors - Requirements ...

  EN 12015:2014

Electromagnetic compatibility - Product family standard for lifts, escalators and moving w...

  EN 12016:2013

Electromagnetic compatibility - Product family standard for lifts, escalators and moving w...

  EN 13241-1:2003/A1:2011

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products wi...

  EN 13309:2010

Construction machinery - Electromagnetic compatibility of machines with internal power sup...

  EN 14010:2003/A1:2009

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EM...

  EN ISO 14982:2009

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acc...

  EN 16361:2013

Power operated pedestrian doors - Product standard, performance characteristics - Pedestri...

  EN 50065-1:2011

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-1:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-1:2003/AC:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-1:2003/A1:2005

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-2:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-2:2003/A1:2005

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-2:2003/AC:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-2:2003/A1:2005/AC:2006

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-3:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-3:2003/A1:2005

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-2-3:2003/AC:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50083-2:2012

Cable networks for television signals, sound signals and interactive services - Part 2: El...

  EN 50121-1:2006

Railway applications - Electromagnetic compatibility - Part 1: General

  EN 50121-1:2006/AC:2008

Railway applications - Electromagnetic compatibility - Part 1: General

  EN 50121-2:2006

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railw...

  EN 50121-2:2006/AC:2008

Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railw...

  EN 50121-3-1:2006

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and...

  EN 50121-3-1:2006/AC:2008

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and...

  EN 50121-3-2:2006

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

  EN 50121-3-2:2006/AC:2008

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

  EN 50121-4:2006

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of th...

  EN 50121-4:2006/AC:2008

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of th...

  EN 50121-5:2006

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fi...

  EN 50121-5:2006/AC:2008

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fi...

  EN 50130-4:2011

Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity ...

  EN 50148:1995

Electronic taximeters

  EN 50270:2006

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of ...

  EN 50293:2012

Road traffic signal systems - Electromagnetic compatibility

  EN 50370-1:2005

Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: ...

  EN 50370-2:2003

Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: ...

  EN 50412-2-1:2005

Power line communication apparatus and systems used in low-voltage installations in the fr...

  EN 50412-2-1:2005/AC:2009

Power line communication apparatus and systems used in low-voltage installations in the fr...

  EN 50428:2005

Switches for household and similar fixed electrical installations - Collateral standard - ...

  EN 50428:2005/A1:2007

Switches for household and similar fixed electrical installations - Collateral standard - ...

  EN 50428:2005/A2:2009

Switches for household and similar fixed electrical installations - Collateral standard - ...

  EN 50470-1:2006

Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test condi...

  EN 50490:2008

Electrical installations for lighting and beaconing of aerodromes - Technical requirements...

  EN 50491-5-1:2010

General requirements for Home and Building Electronic Systems (HBES) and Building Automati...

  EN 50491-5-2:2010

General requirements for Home and Building Electronic Systems (HBES) and Building Automati...

  EN 50491-5-3:2010

General requirements for Home and Building Electronic Systems (HBES) and Building Automati...

  EN 50498:2010

Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic e...

  EN 50512:2009

Electrical installations for lighting and beaconing of aerodromes - Advanced Visual Dockin...

  EN 50529-1:2010

EMC Network Standard - Part 1: Wire-line telecommunications networks using telephone wires

  EN 50529-2:2010

EMC Network Standard - Part 2: Wire-line telecommunications networks using coaxial cables

  EN 50550:2011

Power frequency overvoltage protective device for household and similar applications (POP)

  EN 50550:2011/AC:2012

Power frequency overvoltage protective device for household and similar applications (POP)

  EN 50550:2011/A1:2014

Power frequency overvoltage protective device for household and similar applications (POP)

  EN 50557:2011

Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for h...

  EN 50561-1:2013

Power line communication apparatus used in low-voltage installations - Radio disturbance c...

  EN 55011:2009

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics...

  EN 55012:2007

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limi...

  EN 55014-1:2006

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55014-2:1997

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55014-2:1997/AC:1997

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55015:2006

Limits and methods of measurement of radio disturbance characteristics of electrical light...

  EN 55015:2013

Limits and methods of measurement of radio disturbance characteristics of electrical light...

  EN 55022:2010

Information technology equipment - Radio disturbance characteristics - Limits and methods ...

  EN 55022:2010/AC:2011

Information technology equipment - Radio disturbance characteristics - Limits and methods ...

  EN 55024:2010

Information technology equipment - Immunity characteristics - Limits and methods of measur...

  EN 55032:2012

Electromagnetic compatibility of multimedia equipment - Emission requirements

  EN 55032:2012/AC:2013

Electromagnetic compatibility of multimedia equipment - Emission requirements

  EN 55103-1:2009

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and...

  EN 55103-1:2009/A1:2012

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and...

  EN 55103-2:2009

Electromagnetic compatibility - Product family standard for audio, video, audio-visual and...

  EN 60034-1:2010

Rotating electrical machines - Part 1: Rating and performance

  EN 60034-1:2010/AC:2010

Rotating electrical machines - Part 1: Rating and performance

  EN 60204-31:2013

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EM...

  EN 60255-26:2013

Measuring relays and protection equipment - Part 26: Electromagnetic compatibility require...

  EN 60255-26:2013/AC:2013

Measuring relays and protection equipment - Part 26: Electromagnetic compatibility require...

  EN 60669-2-1:2004

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60669-2-1:2004/AC:2007

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60669-2-1:2004/A12:2010

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60730-1:2011

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60730-2-5:2002

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60730-2-5:2002/A11:2005

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60730-2-6:2008

Automatic electrical controls for household and similar use - Part 2-6: Particular require...

  EN 60730-2-7:2010

Automatic electrical controls for household and similar use - Part 2-7: Particular require...

  EN 60730-2-7:2010/AC:2011

Automatic electrical controls for household and similar use - Part 2-7: Particular require...

  EN 60730-2-8:2002

Automatic electrical controls for household and similar use - Part 2-8: Particular require...

  EN 60730-2-9:2010

Automatic electrical controls for household and similar use - Part 2-9: Particular require...

  EN 60730-2-14:1997

Automatic electrical controls for household and similar use - Part 2-14: Particular requir...

  EN 60730-2-15:2010

Automatic electrical controls for household and similar use - Part 2-15: Particular requir...

  EN 60870-2-1:1996

Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply...

  EN 60945:2002

Maritime navigation and radiocommunication equipment and systems - General requirements - ...

  EN 60947-1:2007

Low-voltage switchgear and controlgear - Part 1: General rules

  EN 60947-2:2006

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60947-3:2009

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnec...

  EN 60947-4-1:2010

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electro...

  EN 60947-4-2:2012

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semi...

  EN 60947-4-3:2014

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60947-5-1:2004

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-1:2004/AC:2005

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-1:2004/AC:2004

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-2:2007

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching e...

  EN 60947-5-3:1999

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching e...

  EN 60947-5-6:2000

Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching e...

  EN 60947-5-7:2003

Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching e...

  EN 60947-5-9:2007

Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching e...

  EN 60947-6-1:2005

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer ...

  EN 60947-6-2:2003

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control a...

  EN 60947-8:2003

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protec...

  EN 60974-10:2014

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

  EN 61000-3-2:2014

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emiss...

  EN 61000-3-3:2013

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, vo...

  EN 61000-3-11:2000

Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, v...

  EN 61000-3-12:2011

Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents pro...

  EN 61000-6-1:2007

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residenti...

  EN 61000-6-2:2005

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industria...

  EN 61000-6-2:2005/AC:2005

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industria...

  EN 61000-6-3:2007

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for ...

  EN 61000-6-3:2007/A1:2011/AC:2012

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for ...

  EN 61000-6-4:2007

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for ...

  EN 61008-1:2012

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61009-1:2012

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61131-2:2007

Programmable controllers - Part 2: Equipment requirements and tests

  EN 61204-3:2000

Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)

  EN 61326-1:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part...

  EN 61326-2-1:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part...

  EN 61326-2-2:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part...

  EN 61326-2-3:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part...

  EN 61326-2-4:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part...

  EN 61326-2-5:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part...

  EN 61439-1:2011

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

  EN 61439-2:2011

Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlge...

  EN 61439-3:2012

Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended t...

  EN 61439-4:2013

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for as...

  EN 61439-5:2011

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribut...

  EN 61439-6:2012

Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (buswa...

  EN 61543:1995

Residual current-operated protective devices (RCDs) for household and similar use - Electr...

  EN 61543:1995/A11:2003/AC:2004

Residual current-operated protective devices (RCDs) for household and similar use - Electr...

  EN 61543:1995/AC:1997

Residual current-operated protective devices (RCDs) for household and similar use - Electr...

  EN 61543:1995/A11:2003

Residual current-operated protective devices (RCDs) for household and similar use - Electr...

  EN 61543:1995/A12:2005

Residual current-operated protective devices (RCDs) for household and similar use - Electr...

  EN 61547:2009

Equipment for general lighting purposes - EMC immunity requirements

  EN 61557-12:2008

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61800-3:2004

Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific te...

  EN 61812-1:2011

Time relays for industrial and residential use - Part 1: Requirements and tests

  EN 62020:1998

Electrical accessories - Residual current monitors for household and similar uses (RCMs)

  EN 62026-1:2007

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: Gen...

  EN 62026-2:2013

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Act...

  EN 62026-3:2009

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: Dev...

  EN 62026-7:2013

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: Com...

  EN 62040-2:2006

Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirem...

  EN 62040-2:2006/AC:2006

Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirem...

  EN 62052-11:2003

Electricity metering equipment (AC) - General requirements, tests and test conditions - Pa...

  EN 62052-21:2004

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - ...

  EN 62053-11:2003

Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanic...

  EN 62053-21:2003

Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters f...

  EN 62053-22:2003

Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters f...

  EN 62053-23:2003

Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters f...

  EN 62054-11:2004

Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements f...

  EN 62054-21:2004

Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements f...

  EN 62135-2:2008

Resistance welding equipment - Part 2: Electromagnetic compatibility (EMC) requirements

  EN 62310-2:2007

Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements

  EN 62423:2012

Type F and type B residual current operated circuit-breakers with and without integral ove...

  EN 62586-1:2014

Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI...

  EN 62586-2:2014

Power quality measurement in power supply systems - Part 2: Functional tests and uncertain...

  EN 62606:2013

General requirements for arc fault detection devices

  EN 300 386 V1.6.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network ...

  EN 301 489-1 V1.9.2

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibil...

  EN 301 489-34 V1.4.1

Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibil...

  EN ISO 11252:2013

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation...

  EN 13637:2015

Building hardware - Electrically controlled exit systems for use on escape routes - Requir...

  HD 308 S2:2001

Identification of cores in cables and flexible cords

  HD 361 S3:1999

System for cable designation

  HD 361 S3:1999/A1:2006

System for cable designation

  HD 361 S3:1999/AC:1999

System for cable designation

  HD 368 S1:1978

Direct acting recording electrical measuring instruments and their accessories

  HD 516 S2:1997

Guide to use of low voltage harmonized cables

  HD 516 S2:1997/A2:2008

Guide to use of low voltage harmonized cables

  HD 516 S2:1997/A1:2003

Guide to use of low voltage harmonized cables

  HD 549 S1:1989

Conference systems - Electrical and audio requirements

  HD 597 S1:1992

Coupling capacitors and capacitor dividers

  HD 597 S1:1992/AC:1992

Coupling capacitors and capacitor dividers

  HD 603 S1:1994

Distribution cables of rated voltage 0,6/1 kV

  HD 603 S1:1994/A2:2003

Distribution cables of rated voltage 0,6/1 kV

  HD 603 S1:1994/A3:2007

Distribution cables of rated voltage 0,6/1 kV

  HD 603 S1:1994/A1:1997

Distribution cables of rated voltage 0,6/1 kV

  HD 604 S1:1994

0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power statio...

  HD 604 S1:1994/A2:2002

0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power statio...

  HD 604 S1:1994/A3:2005

0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power statio...

  HD 604 S1:1994/A1:1997

0,6/1 kV and 1,9/3,3 kV power cables with special fire performance for use in power statio...

  HD 605 S2:2008

Electric cables - Additional test methods

  HD 605 S2:2008/AC:2010

Electric cables - Additional test methods

  HD 626 S1:1996

Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV

  HD 626 S1:1996/A1:1997

Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV

  HD 626 S1:1996/A2:2002

Overhead distribution cables of rated voltage Uo/U(Um): 0,6/1 (1,2) kV

  HD 627 S1:1996

Multicore and multipair cables for installation above and below ground

  HD 627 S1:1996/A1:2000

Multicore and multipair cables for installation above and below ground

  HD 627 S1:1996/A2:2005

Multicore and multipair cables for installation above and below ground

  HD 639 S1:2002

Electrical accessories - Portable residual current devices without integral overcurrent pr...

  HD 639 S1:2002/A1:2003

Electrical accessories - Portable residual current devices without integral overcurrent pr...

  HD 639 S1:2002/AC:2003

Electrical accessories - Portable residual current devices without integral overcurrent pr...

  HD 639 S1:2002/A2:2010

Electrical accessories - Portable residual current devices without integral overcurrent pr...

  EN 41003:2008

Particular safety requirements for equipment to be connected to telecommunication networks...

  EN 50065-4-2:2001

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-4-2:2001/A2:2005

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-4-2:2001/A1:2003

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-4-7:2005

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50065-4-7:2005/AC:2006

Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 k...

  EN 50085-1:2005

Cable trunking systems and cable ducting systems for electrical installations - Part 1: Ge...

  EN 50085-1:2005/A1:2013

Cable trunking systems and cable ducting systems for electrical installations - Part 1: Ge...

  EN 50085-2-1:2006

Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: ...

  EN 50085-2-1:2006/A1:2011

Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: ...

  EN 50085-2-2:2008

Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: ...

  EN 50085-2-3:2010

Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: ...

  EN 50085-2-4:2009

Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: ...

  EN 50106:2008

Safety of household and similar electrical appliances - Particular rules for routine tests...

  EN 50117-1:2002

Coaxial cables - Part 1: Generic specification

  EN 50117-1:2002/A2:2013

Coaxial cables - Part 1: Generic specification

  EN 50117-1:2002/A1:2006

Coaxial cables - Part 1: Generic specification

  EN 50117-2-1:2005

Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-1:2005/A1:2008

Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-1:2005/A2:2013

Coaxial cables - Part 2-1: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-2:2004

Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-2:2004/A2:2013

Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-2:2004/A1:2008

Coaxial cables - Part 2-2: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-3:2004

Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-3:2004/A2:2013

Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-3:2004/A1:2008

Coaxial cables - Part 2-3: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-4:2004

Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-4:2004/A1:2008

Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-4:2004/A2:2013

Coaxial cables - Part 2-4: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-5:2004

Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-5:2004/AC:2012

Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-5:2004/A2:2013

Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution ...

  EN 50117-2-5:2004/A1:2008

Coaxial cables - Part 2-5: Sectional specification for cables used in cabled distribution ...

  EN 50117-3-1:2002

Coaxial cables - Part 3-1: Sectional specifications for cables used in Telecom application...

  EN 50117-4-1:2008

Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordanc...

  EN 50117-4-1:2008/A1:2013

Coaxial cables - Part 4-1: Sectional specification for cables for BCT cabling in accordanc...

  EN 50117-4-2:2015

Coaxial cables - Part 4-2: Sectional specification for CATV cables up to 6 GHz used in cab...

  EN 50156-1:2004

Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for appli...

  EN 50156-1:2015

Electrical equipment for furnaces and ancillary equipment - Part 1: Requirements for appli...

  EN 50156-2:2015

Electrical equipment for furnaces and ancillary equipment - Part 2: Requirements for desig...

  EN 50178:1997

Electronic equipment for use in power installations

  EN 50214:2006

Flat polyvinyl chloride sheathed flexible cables

  EN 50214:2006/AC:2007

Flat polyvinyl chloride sheathed flexible cables

  EN 50250:2002

Conversion adaptors for industrial use

  EN 50250:2002/AC:2007

Conversion adaptors for industrial use

  EN 50250:2002/A1:2015

Conversion adaptors for industrial use

  EN 50262:1998

Cable glands for electrical installations

  EN 50262:1998/A1:2001

Cable glands for electrical installations

  EN 50262:1998/A2:2004

Cable glands for electrical installations

  EN 50262:1998/AC:1998

Cable glands for electrical installations

  EN 50267-1:1998

Common test methods for cables under fire conditions - Tests on gases evolved during combu...

  EN 50267-2-1:1998

Common test methods for cables under fire conditions - Tests on gases evolved during combu...

  EN 50267-2-2:1998

Common test methods for cables under fire conditions - Tests on gases evolved during combu...

  EN 50267-2-3:1998

Common test methods for cables under fire conditions - Tests on gases evolved during combu...

  EN 50274:2002

Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Pr...

  EN 50274:2002/AC:2009

Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Pr...

  EN 50288-1:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-1:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-2-1:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-2-1:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-2-2:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-2-2:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-3-1:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-3-1:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-3-2:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-3-2:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-4-1:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-4-1:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-4-2:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-4-2:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-5-1:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-5-1:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-5-2:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-5-2:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-6-1:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-6-1:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-6-2:2003

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-6-2:2013

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-7:2005

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-8:2012

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-9-1:2012

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-9-2:2015

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-10-1:2012

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-10-2:2015

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-11-1:2012

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50288-11-2:2015

Multi-element metallic cables used in analogue and digital communication and control - Par...

  EN 50289-1-3:2001

Communication cables - Specifications for test methods - Part 1-3: Electrical test methods...

  EN 50289-1-4:2001

Communication cables - Specifications for test methods - Part 1-4: Electrical test methods...

  EN 50290-2-1:2005

Communication cables - Part 2-1: Common design rules and construction

  EN 50290-2-20:2001

Communication cables - Part 2-20: Common design rules and construction - General

  EN 50290-2-21:2001

Communication cables - Part 2-21: Common design rules and construction - PVC insulation co...

  EN 50290-2-21:2001/AC:2003

Communication cables - Part 2-21: Common design rules and construction - PVC insulation co...

  EN 50290-2-21:2001/A1:2007

Communication cables - Part 2-21: Common design rules and construction - PVC insulation co...

  EN 50290-2-21:2001/A1:2007/AC:2016

Communication cables - Part 2-21: Common design rules and construction - PVC insulation co...

  EN 50290-2-22:2001

Communication cables - Part 2-22: Common design rules and construction - PVC sheathing com...

  EN 50290-2-22:2001/A1:2007

Communication cables - Part 2-22: Common design rules and construction - PVC sheathing com...

  EN 50290-2-23:2001

Communication cables - Part 2-23: Common design rules and construction - PE insulation

  EN 50290-2-23:2013

Communication cables - Part 2-23: Common design rules and construction - Polyethylene insu...

  EN 50290-2-24:2002

Communication cables - Part 2-24: Common design rules and construction - PE sheathing

  EN 50290-2-24:2002/A1:2008

Communication cables - Part 2-24: Common design rules and construction - PE sheathing

  EN 50290-2-25:2002

Communication cables - Part 2-25: Common design rules and construction - Polypropylene ins...

  EN 50290-2-25:2013

Communication cables - Part 2-25: Common design rules and construction - Polypropylene ins...

  EN 50290-2-26:2002

Communication cables - Part 2-26: Common design rules and construction - Halogen free flam...

  EN 50290-2-26:2002/A1:2007

Communication cables - Part 2-26: Common design rules and construction - Halogen free flam...

  EN 50290-2-27:2002

Communication cables - Part 2-27: Common design rules and construction - Halogen free flam...

  EN 50290-2-27:2002/A1:2007

Communication cables - Part 2-27: Common design rules and construction - Halogen free flam...

  EN 50290-2-27:2002/A1:2007/AC:2010

Communication cables - Part 2-27: Common design rules and construction - Halogen free flam...

  EN 50290-2-28:2002

Communication cables - Part 2-28: Common design rules and construction - Filling compounds...

  EN 50290-2-29:2002

Communication cables - Part 2-29: Common design rules and construction - Cross-linked PE i...

  EN 50290-2-30:2002

Communication cables - Part 2-30: Common design rules and construction - Poly(tetrafluoroe...

  EN 50290-4-1:2001

Communication cables - Part 4-1: General considerations for the use of cables - Environmen...

  EN 50290-4-1:2014

Communication cables - Part 4-1: General considerations for the use of cables - Environmen...

  EN 50290-4-2:2014

Communication cables - Part 4-2: General considerations for the use of cables - Guide to u...

  EN 50363-0:2011

Insulating, sheathing and covering materials for low-voltage energy cables - Part 0: Gener...

  EN 50363-1:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 1: Cross...

  EN 50363-2-1:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cro...

  EN 50363-2-1:2005/A1:2011

Insulating, sheathing and covering materials for low voltage energy cables - Part 2-1: Cro...

  EN 50363-2-2:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 2-2: Cro...

  EN 50363-3:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC i...

  EN 50363-3:2005/A1:2011

Insulating, sheathing and covering materials for low voltage energy cables - Part 3: PVC i...

  EN 50363-4-1:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 4-1: PVC...

  EN 50363-4-2:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 4-2: PVC...

  EN 50363-5:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halog...

  EN 50363-5:2005/A1:2011

Insulating, sheathing and covering materials for low voltage energy cables - Part 5: Halog...

  EN 50363-6:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halog...

  EN 50363-6:2005/A1:2011

Insulating, sheathing and covering materials for low voltage energy cables - Part 6: Halog...

  EN 50363-7:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 7: Halog...

  EN 50363-8:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halog...

  EN 50363-8:2005/A1:2011

Insulating, sheathing and covering materials for low voltage energy cables - Part 8: Halog...

  EN 50363-9-1:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 9-1: Mis...

  EN 50363-10-1:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 10-1: Mi...

  EN 50363-10-2:2005

Insulating, sheathing and covering materials for low voltage energy cables - Part 10-2: Mi...

  EN 50364:2010

Limitation of human exposure to electromagnetic fields from devices operating in the frequ...

  EN 50369:2005

Liquid tight sheathing systems for cable management

  EN 50395:2005

Electrical test methods for low voltage energy cables

  EN 50395:2005/A1:2011

Electrical test methods for low voltage energy cables

  EN 50396:2005

Non electrical test methods for low voltage energy cables

  EN 50396:2005/A1:2011

Non electrical test methods for low voltage energy cables

  EN 50406-1:2004

End user multi-pair cables used in high bit rate telecommunication networks - Part 1: Aeri...

  EN 50406-2:2004

End user multi-pair cables used in high bit rate telecommunication networks - Part 2: Duct...

  EN 50407-1:2004

Multi-pair cables used in high bit rate digital access telecommunication networks - Part 1...

  EN 50407-3:2014

Multi-pair cables used in high bit rate digital access telecommunications networks - Part ...

  EN 50428:2005

Switches for household and similar fixed electrical installations - Collateral standard - ...

  EN 50428:2005/A1:2007

Switches for household and similar fixed electrical installations - Collateral standard - ...

  EN 50428:2005/A2:2009

Switches for household and similar fixed electrical installations - Collateral standard - ...

  EN 50441-1:2012

Cables for indoor residential telecommunication installations - Part 1: Unscreened cables ...

  EN 50441-2:2012

Cables for indoor residential telecommunication installations - Part 2: Screened cables - ...

  EN 50441-3:2006

Cables for indoor residential telecommunication installations - Part 3: Screened cables - ...

  EN 50441-4:2012

Cables for indoor residential telecommunication installations - Part 4: Cables up to 1 200...

  EN 50445:2008

Product family standard to demonstrate compliance of equipment for resistance welding, arc...

  EN 50491-3:2009

General requirements for Home and Building Electronic Systems (HBES) and Building Automati...

  EN 50491-4-1:2012

General requirements for Home and Building Electronic Systems (HBES) and Building Automati...

  EN 50491-6-1:2014

General requirements for Home and Building Electronic Systems (HBES) and Building Automati...

  EN 50497:2007

Recommended test method for assessment of the risk of plasticizer exudation from PVC insul...

  EN 50520:2009

Cover plates and cover tapes for the protection and location warning of buried cables or b...

  EN 50525-1:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-11:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-12:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-21:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-21:2011/AC:2013

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-22:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-31:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-41:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-42:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-51:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-71:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-72:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-81:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-82:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-2-83:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-3-11:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-3-21:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-3-21:2011/AC:2013

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-3-31:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50525-3-41:2011

Electric cables - Low voltage energy cables of rated voltages up to and including 450/750 ...

  EN 50539-11:2013

Low-voltage surge protective devices - Surge protective devices for specific application i...

  EN 50539-11:2013/A1:2014

Low-voltage surge protective devices - Surge protective devices for specific application i...

  EN 50550:2011

Power frequency overvoltage protective device for household and similar applications (POP)

  EN 50550:2011/AC:2012

Power frequency overvoltage protective device for household and similar applications (POP)

  EN 50550:2011/A1:2014

Power frequency overvoltage protective device for household and similar applications (POP)

  EN 50556:2011

Road traffic signal systems

  EN 50557:2011

Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for h...

  EN 50565-1:2014

Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0...

  EN 50565-2:2014

Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0...

  EN 50615:2015

Household and similar electrical appliances - Safety - Particular requirements for devices...

  EN 50618:2014

Electric cables for photovoltaic systems

  EN 60034-1:2010

Rotating electrical machines - Part 1: Rating and performance

  EN 60034-1:2010/AC:2010

Rotating electrical machines - Part 1: Rating and performance

  EN 60034-5:2001

Rotating electrical machines - Part 5: Degrees of protection provided by the integral desi...

  EN 60034-6:1993

Rotating electrical machines - Part 6: Methods of cooling (IC Code)

  EN 60034-7:1993

Rotating electrical machines - Part 7: Classification of types of construction, mounting a...

  EN 60034-8:2007

Rotating electrical machines - Part 8: Terminal markings and direction of rotation

  EN 60034-9:2005

Rotating electrical machines - Part 9: Noise limits

  EN 60034-11:2004

Rotating electrical machines - Part 11: Thermal protection

  EN 60034-12:2002

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase c...

  EN 60034-14:2004

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaf...

  EN 60051-1:1998

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-2:1989

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-3:1989

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-4:1989

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-5:1989

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-6:1989

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-7:1989

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-8:1989

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-9:1989

Direct acting indicating analogue electrical-measuring instruments and their accessories -...

  EN 60065:2002

Audio, video and similar electronic apparatus - Safety requirements

  EN 60065:2002/A11:2008

Audio, video and similar electronic apparatus - Safety requirements

  EN 60065:2002/AC:2007

Audio, video and similar electronic apparatus - Safety requirements

  EN 60065:2002/A12:2011

Audio, video and similar electronic apparatus - Safety requirements

  EN 60065:2002/AC:2006

Audio, video and similar electronic apparatus - Safety requirements

  EN 60065:2014

Audio, video and similar electronic apparatus - Safety requirements

  EN 60065:2014/AC:2016

Audio, video and similar electronic apparatus - Safety requirements

  EN 60110-1:1998

Power capacitors for induction heating installations - Part 1: General

  EN 60127-1:2006

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for min...

  EN 60127-2:2003

Miniature fuses - Part 2: Cartridge fuse-links

  EN 60127-2:2014

Miniature fuses - Part 2: Cartridge fuse-links

  EN 60127-3:1996

Miniature fuses - Part 3: Sub-miniature fuse-links

  EN 60127-3:1996/AC:1996

Miniature fuses - Part 3: Sub-miniature fuse-links

  EN 60127-4:2005

Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mo...

  EN 60127-6:1994

Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

  EN 60127-6:2014

Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

  EN 60127-7:2013

Miniature fuses - Part 7: Miniature fuse-links for special applications

  EN 60127-7:2016

Miniature fuses - Part 7: Miniature fuse-links for special applications

  EN 60143-2:1994

Series capacitors for power systems - Part 2: Protective equipment for series capacitor ba...

  EN 60143-2:2013

Series capacitors for power systems - Part 2: Protective equipment for series capacitor ba...

  EN 60155:1995

Glow-starters for fluorescent lamps

  EN 60204-1:2006

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN 60204-1:2006/AC:2010

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN 60204-32:2008

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoistin...

  EN 60215:1989

Safety requirements for radio transmitting equipment

  EN 60228:2005

Conductors of insulated cables

  EN 60228:2005/AC:2005

Conductors of insulated cables

  EN 60238:2004

Edison screw lampholders

  EN 60238:2004/AC:2005

Edison screw lampholders

  EN 60252-1:2011

AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requireme...

  EN 60252-2:2011

AC motor capacitors - Part 2: Motor start capacitors

  EN 60255-5:2001

Electrical relays - Part 5: Insulation coordination for measuring relays and protection eq...

  EN 60255-27:2005

Measuring relays and protection equipment - Part 27: Product safety requirements

  EN 60255-27:2014

Measuring relays and protection equipment - Part 27: Product safety requirements

  EN 60269-1:2007

Low-voltage fuses - Part 1: General requirements

  HD 60269-2:2010

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized per...

  HD 60269-2:2013

Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized per...

  HD 60269-3:2010

Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled pers...

  EN 60269-4:2009

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection o...

  EN 60269-6:2011

Low-voltage fuses - Part 6: Supplementary requirements for fuse-links for the protection o...

  EN 60309-1:1999

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

  EN 60309-1:1999/A1:2007/AC:2014

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

  EN 60309-2:1999

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchan...

  EN 60309-4:2007

Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outle...

  EN 60320-1:2001

Appliance couplers for household and similar general purposes - Part 1: General requiremen...

  EN 60320-2-1:2000

Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine c...

  EN 60320-2-2:1998

Appliance couplers for household and similar general purposes - Part 2-2: Interconnection ...

  EN 60320-2-4:2006

Appliance couplers for household and similar general purposes - Part 2-4: Appliance couple...

  EN 60332-1-1:2004

Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vert...

  EN 60332-1-2:2004

Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vert...

  EN 60332-1-3:2004

Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vert...

  EN 60332-2-1:2004

Tests on electric and optical fibre cables under fire conditions - Part 2-1: Test for vert...

  EN 60332-2-2:2004

Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vert...

  EN 60332-3-10:2009

Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for ver...

  EN 60332-3-21:2009

Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for ver...

  EN 60332-3-22:2009

Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for ver...

  EN 60332-3-23:2009

Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for ver...

  EN 60332-3-24:2009

Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for ver...

  EN 60332-3-25:2009

Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for ver...

  EN 60335-1:1994

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A12:1996

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A15:2000

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/AC:1995

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A1:1996

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/AC:1994

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A11:1995

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A16:2001

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A2:2000

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/AC:2009

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A13:1998

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A2:2000/AC:2004

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:1994/A14:1998

Safety of household and similar electrical appliances - Part 1: General requirementsIEC 60...

  EN 60335-1:2002

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A12:2006

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A2:2006

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A1:2004

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A11:2004

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A13:2008

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/AC:2009

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A15:2011

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A14:2010

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A1:2004/AC:2007

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/A12:2006/AC:2007

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2002/AC:2010

Household and similar electrical appliances - Safety - Part 1: General requirementsIEC 603...

  EN 60335-1:2012

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2012/AC:2014

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2012/A11:2014

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-2-2:2010

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements f...

  EN 60335-2-2:2010/A11:2012

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements f...

  EN 60335-2-3:2002

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements f...

  EN 60335-2-3:2002/A11:2010

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements f...

  EN 60335-2-3:2002/A11:2010/AC:2012

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements f...

  EN 60335-2-3:2016

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements f...

  EN 60335-2-4:2010

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements f...

  EN 60335-2-5:2003

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-5:2003/A11:2009

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-5:2003/A12:2012

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-5:2015

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-6:2003

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2003/A11:2010

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2003/A11:2010/AC:2012

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2003/A12:2012

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2003/A13:2013

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2015

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-7:2010

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements f...

  EN 60335-2-7:2010/A11:2013

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements f...

  EN 60335-2-8:2003

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements f...

  EN 60335-2-8:2015

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements f...

  EN 60335-2-9:2003

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements f...

  EN 60335-2-9:2003/A13:2010/AC:2012

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements f...

  EN 60335-2-9:2003/A13:2010/AC:2011

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements f...

  EN 60335-2-9:2003/A13:2010

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements f...

  EN 60335-2-9:2003/A12:2007

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements f...

  EN 60335-2-10:2003

Household and similar electrical appliances - Safety - Part 2-10: Particular requirements ...

  EN 60335-2-11:2010

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements ...

  EN 60335-2-11:2010/A11:2012

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements ...

  EN 60335-2-12:2003

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements ...

  EN 60335-2-13:2010

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements ...

  EN 60335-2-13:2010/A11:2012

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements ...

  EN 60335-2-15:2002

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2002/A11:2012/AC:2013

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2002/AC:2005

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2002/A11:2012

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2002/AC:2006

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-16:2003

Household and similar electrical appliances - Safety - Part 2-16: Particular requirements ...

  EN 60335-2-17:2013

Household and similar electrical appliances - Safety - Part 2-17: Particular requirements ...

  EN 60335-2-21:2003

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements ...

  EN 60335-2-21:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements ...

  EN 60335-2-21:2003/AC:2010

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements ...

  EN 60335-2-23:2003

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements ...

  EN 60335-2-23:2003/A11:2010/AC:2012

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements ...

  EN 60335-2-23:2003/A11:2010

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements ...

  EN 60335-2-25:2012

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements ...

  EN 60335-2-26:2003

Household and similar electrical appliances - Safety - Part 2-26: Particular requirements ...

  EN 60335-2-27:2013

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements ...

  EN 60335-2-28:2003

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements ...

  EN 60335-2-29:2004

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements ...

  EN 60335-2-30:2009

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60335-2-30:2009/AC:2010

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60335-2-30:2009/A11:2012

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60335-2-30:2009/AC:2014

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60335-2-31:2003

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements ...

  EN 60335-2-31:2003/AC:2005

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements ...

  EN 60335-2-31:2014

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements ...

  EN 60335-2-32:2003

Household and similar electrical appliances - Safety - Part 2-32: Particular requirements ...

  EN 60335-2-34:2013

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements ...

  EN 60335-2-35:2002

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements ...

  EN 60335-2-35:2002/AC:2005

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements ...

  EN 60335-2-35:2016

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements ...

  EN 60335-2-36:2002

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-36:2002/A11:2012

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-36:2002/AC:2007

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-37:2002

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-37:2002/AC:2007

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-37:2002/A11:2012

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-38:2003

Household and similar electrical appliances - Safety - Part 2-38: Particular requirements ...

  EN 60335-2-38:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-38: Particular requirements ...

  EN 60335-2-39:2003

Household and similar electrical appliances - Safety - Part 2-39: Particular requirements ...

  EN 60335-2-39:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-39: Particular requirements ...

  EN 60335-2-40:2003

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A13:2012

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/AC:2010

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A11:2004

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A12:2005

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/AC:2006

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A13:2012/AC:2013

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-41:2003

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements ...

  EN 60335-2-42:2003

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements ...

  EN 60335-2-42:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements ...

  EN 60335-2-42:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements ...

  EN 60335-2-43:2003

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements ...

  EN 60335-2-44:2002

Household and similar electrical appliances - Safety - Part 2-44: Particular requirements ...

  EN 60335-2-45:2002

Household and similar electrical appliances - Safety - Part 2-45: Particular requirements ...

  EN 60335-2-47:2003

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-47:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-47:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-48:2003

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-48:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-48:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-49:2003

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-49:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-49:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-50:2003

Household and similar electrical appliances - Safety - Part 2-50: Particular requirements ...

  EN 60335-2-50:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-50: Particular requirements ...

  EN 60335-2-51:2003

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements ...

  EN 60335-2-52:2003

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements ...

  EN 60335-2-52:2003/A11:2010/AC:2012

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements ...

  EN 60335-2-52:2003/A11:2010

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements ...

  EN 60335-2-53:2011

Household and similar electrical appliances - Safety - Part 2-53: Particular requirements ...

  EN 60335-2-54:2008

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements ...

  EN 60335-2-54:2008/A11:2012

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements ...

  EN 60335-2-54:2008/A11:2012/AC:2015

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements ...

  EN 60335-2-55:2003

Household and similar electrical appliances - Safety - Part 2-55: Particular requirements ...

  EN 60335-2-56:2003

Household and similar electrical appliances - Safety - Part 2-56: Particular requirements ...

  EN 60335-2-58:2005

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements ...

  EN 60335-2-59:2003

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements ...

  EN 60335-2-60:2003

Household and similar electrical appliances - Safety - Part 2-60: Particular requirements ...

  EN 60335-2-60:2003/A11:2010

Household and similar electrical appliances - Safety - Part 2-60: Particular requirements ...

  EN 60335-2-60:2003/A12:2010

Household and similar electrical appliances - Safety - Part 2-60: Particular requirements ...

  EN 60335-2-61:2003

Household and similar electrical appliances - Safety - Part 2-61: Particular requirements ...

  EN 60335-2-62:2003

Household and similar electrical appliances - Safety - Part 2-62: Particular requirements ...

  EN 60335-2-62:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-62: Particular requirements ...

  EN 60335-2-65:2003

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements ...

  EN 60335-2-65:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements ...

  EN 60335-2-66:2003

Household and similar electrical appliances - Safety - Part 2-66: Particular requirements ...

  EN 60335-2-70:2002

Household and similar electrical appliances - Safety - Part 2-70: Particular requirements ...

  EN 60335-2-71:2003

Household and similar electrical appliances - Safety - Part 2-71: Particular requirements ...

  EN 60335-2-73:2003

Household and similar electrical appliances - Safety - Part 2-73: Particular requirements ...

  EN 60335-2-74:2003

Household and similar electrical appliances - Safety - Part 2-74: Particular requirements ...

  EN 60335-2-75:2004

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements ...

  EN 60335-2-75:2004/A11:2006

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements ...

  EN 60335-2-75:2004/A12:2010

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements ...

  EN 60335-2-78:2003

Household and similar electrical appliances - Safety - Part 2-78: Particular requirements ...

  EN 60335-2-80:2003

+6Household and similar electrical appliances - Safety - Part 2-80: Particular requirement...

  EN 60335-2-81:2003

Household and similar electrical appliances - Safety - Part 2-81: Particular requirements ...

  EN 60335-2-82:2003

Household and similar electrical appliances - Safety - Part 2-82: Particular requirements ...

  EN 60335-2-83:2002

Household and similar electrical appliances - Safety - Part 2-83: Particular requirements ...

  EN 60335-2-84:2003

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements ...

  EN 60335-2-85:2003

Household and similar electrical appliances - Safety - Part 2-85: Particular requirements ...

  EN 60335-2-86:2003

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements ...

  EN 60335-2-86:2003/A11:2016

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements ...

  EN 60335-2-87:2002

Household and similar electrical appliances - Safety - Part 2-87: Particular requirements ...

  EN 60335-2-88:2002

Household and similar electrical appliances - Safety - Part 2-88: Particular requirements ...

  EN 60335-2-90:2006

Household and similar electrical appliances - Safety - Part 2-90: Particular requirements ...

  EN 60335-2-96:2002

Household and similar electrical appliances - Safety - Part 2-96: Particular requirements ...

  EN 60335-2-97:2006

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements ...

  EN 60335-2-97:2006/A12:2015

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements ...

  EN 60335-2-97:2006/A11:2008

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements ...

  EN 60335-2-98:2003

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements ...

  EN 60335-2-99:2003

Household and similar electrical appliances - Safety - Part 2-99: Particular requirements ...

  EN 60335-2-101:2002

Household and similar electrical appliances - Safety - Part 2-101: Particular requirements...

  EN 60335-2-102:2006

Household and similar electrical appliances - Safety - Part 2-102: Particular requirements...

  EN 60335-2-102:2016

Household and similar electrical appliances - Safety - Part 2-102: Particular requirements...

  EN 60335-2-105:2005

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements...

  EN 60335-2-105:2005/A11:2010

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements...

  EN 60335-2-106:2007

Household and similar electrical appliances - Safety - Part 2-106: Particular requirements...

  EN 60335-2-108:2008

Household and similar electrical appliances - Safety - Part 2-108: Particular requirements...

  EN 60335-2-109:2010

Household and similar electrical appliances - Safety - Part 2-109: Particular requirements...

  EN 60358-1:2012

Coupling capacitors and capacitor dividers - Part 1: General rules

  EN 60358-1:2012/AC:2013

Coupling capacitors and capacitor dividers - Part 1: General rules

  EN 60360:1998

Standard method of measurement of lamp cap temperature rise

  EN 60399:2004

Barrel thread for lampholders with shade holder ring

  EN 60400:2008

Lampholders for tubular fluorescent lamps and starterholders

  EN 60423:2007

Conduit systems for cable management - Outside diameters of conduits for electrical instal...

  EN 60432-1:2000

Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic ...

  EN 60432-2:2000

Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic a...

  EN 60432-3:2013

Incandescent lamps - Safety specifications - Part 3: Tungsten-halogen lamps (non-vehicle)

  EN 60477:1997

Laboratory d.c. resistors

  EN 60477-2:1997

Laboratory resistors - Part 2: Laboratory a.c. resistors

  EN 60519-1:2011

Safety in electroheating installations - Part 1: General requirements

  EN 60519-1:2015

Safety in installations for electroheating and electromagnetic processing - Part 1: Genera...

  EN 60519-2:2006

Safety in electroheat installations - Part 2: Particular requirements for resistance heati...

  EN 60519-3:2005

Safety in electroheat installations - Part 3: Particular requirements for induction and co...

  EN 60519-4:2006

Safety in electroheat installations - Part 4: Particular requirements for arc furnace inst...

  EN 60519-4:2013

Safety in electroheating installations - Part 4: Particular requirements for arc furnace i...

  EN 60519-6:2011

Safety in electroheat installations - Part 6: Specifications for safety in industrial micr...

  EN 60519-7:2008

Safety in electroheat installations - Part 7: Particular requirements for installations wi...

  EN 60519-8:2005

Safety in electroheat installations - Part 8: Particular requirements for electroslag reme...

  EN 60519-9:2005

Safety in electroheat installations - Part 9: Particular requirements for high-frequency d...

  EN 60519-10:2005

Safety in electroheat installations - Part 10: Particular requirements for electrical resi...

  EN 60519-10:2013

Safety in electroheating installations - Part 10: Particular requirements for electrical r...

  EN 60519-12:2013

Safety in electroheating installations - Part 12: Particular requirements for infrared ele...

  EN 60519-21:2009

Safety in electroheat installations - Part 21: Particular requirements for resistance heat...

  EN 60523:1993

Direct-current potentiometers

  EN 60524:1993

Direct-current resistive volt ratio boxes

  EN 60529:1991

Degrees of protection provided by enclosures (IP Code)

  EN 60529:1991/AC:1993

Degrees of protection provided by enclosures (IP Code)

  EN 60564:1993

D.C. bridges for measuring resistance

  EN 60570:2003

Electrical supply track systems for luminaires

  EN 60598-1:2008

Luminaires - Part 1: General requirements and tests

  EN 60598-1:2008/A11:2009

Luminaires - Part 1: General requirements and tests

  EN 60598-1:2015

Luminaires - Part 1: General requirements and tests

  EN 60598-1:2015/AC:2015

Luminaires - Part 1: General requirements and tests

  EN 60598-1:2015/AC:2016

Luminaires - Part 1: General requirements and tests

  EN 60598-2-1:1989

Luminaires - Part 2: Particular requirements - Section 1: Fixed general purpose luminaires

  EN 60598-2-2:2012

Luminaires - Part 2-2: Particular requirements - Recessed luminaires

  EN 60598-2-3:2003

Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

  EN 60598-2-3:2003/AC:2005

Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

  EN 60598-2-4:1997

Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminai...

  EN 60598-2-5:1998

Luminaires - Part 2-5: Particular requirements - Floodlights

  EN 60598-2-5:1998/AC:1998

Luminaires - Part 2-5: Particular requirements - Floodlights

  EN 60598-2-5:2015

Luminaires - Part 2-5: Particular requirements - Floodlights

  EN 60598-2-7:1989

Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden u...

  EN 60598-2-7:1989/A2:1996/AC:1999

Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden u...

  EN 60598-2-7:1989/A13:1997

Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden u...

  EN 60598-2-8:1997

Luminaires - Part 2-8: Particular requirements - Handlamps

  EN 60598-2-8:2013

Luminaires - Part 2-8: Particular requirements - Handlamps

  EN 60598-2-9:1989

Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-p...

  EN 60598-2-10:2003

Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

  EN 60598-2-10:2003/AC:2005

Luminaires - Part 2-10: Particular requirements - Portable luminaires for children

  EN 60598-2-11:2005

Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

  EN 60598-2-11:2005/AC:2005

Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

  EN 60598-2-11:2013

Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

  EN 60598-2-12:2006

Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

  EN 60598-2-12:2006/AC:2006

Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

  EN 60598-2-12:2013

Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights

  EN 60598-2-13:2006

Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

  EN 60598-2-13:2006/AC:2006

Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

  EN 60598-2-14:2009

Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular disc...

  EN 60598-2-17:1989

Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, ...

  EN 60598-2-19:1989

Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety...

  EN 60598-2-19:1989/AC:2005

Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety...

  EN 60598-2-20:2010

Luminaires - Part 2-20: Particular requirements - Lighting chains

  EN 60598-2-20:2010/AC:2010

Luminaires - Part 2-20: Particular requirements - Lighting chains

  EN 60598-2-20:2015

Luminaires - Part 2-20: Particular requirements - Lighting chains

  EN 60598-2-21:2015

Luminaires - Part 2-21: Particular requirements - Rope lights

  EN 60598-2-22:1998

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-22:1998/AC:2007

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-22:1998/AC:2005

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-22:1998/AC:1999

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-22:2014

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-22:2014/AC:2015

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-23:1996

Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for f...

  EN 60598-2-23:1996/AC:1997

Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for f...

  EN 60598-2-24:1998

Luminaires - Part 2: Particular requirements - Section 24: Luminaires with limited surface...

  EN 60598-2-24:2013

Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperat...

  EN 60598-2-25:1994

Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of ...

  EN 60618:1997

Inductive voltage dividers

  EN 60645-1:2001

Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometers

  EN 60645-1:2015

Electroacoustics - Audiometric equipment - Part 1: Equipment for pure-tone audiometry

  EN 60645-3:2007

Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration

  EN 60645-4:1995

Audiometers - Part 4: Equipment for extended high-frequency audiometry

  EN 60645-6:2010

Electroacoustics - Audiometric equipment - Part 6: Instruments for the measurement of otoa...

  EN 60645-7:2010

Electroacoustics - Audiometric equipment - Part 7: Instruments for the measurement of audi...

  EN 60664-1:2007

Insulation coordination for equipment within low-voltage systems - Part 1: Principles, req...

  EN 60664-3:2003

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating,...

  EN 60664-4:2006

Insulation coordination for equipment within low-voltage systems - Part 4: Consideration o...

  EN 60664-4:2006/AC:2006

Insulation coordination for equipment within low-voltage systems - Part 4: Consideration o...

  EN 60669-1:1999

Switches for household and similar fixed-electrical installations - Part 1: General requir...

  EN 60669-2-1:2004

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60669-2-1:2004/AC:2007

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60669-2-1:2004/A12:2010

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60669-2-2:2006

Switches for household and similar fixed electrical installations - Part 2-2: Particular r...

  EN 60669-2-3:2006

Switches for household and similar fixed electrical installations - Part 2-3: Particular r...

  EN 60669-2-4:2005

Switches for household and similar fixed electrical installations - Part 2-4: Particular r...

  EN 60669-2-6:2012

Switches for household and similar fixed electrical installations - Part 2-6: Particular r...

  EN 60670-1:2005

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60670-1:2005/AC:2007

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60670-1:2005/AC:2010

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60670-21:2007

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60670-22:2006

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60670-23:2008

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60670-24:2013

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60688:2013

Electrical measuring transducers for converting A.C. and D.C. electrical quantities to ana...

  EN 60691:2003

Thermal-links - Requirements and application guide

  EN 60695-2-10:2001

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus...

  EN 60695-2-10:2013

Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus...

  EN 60695-2-11:2001

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammabil...

  EN 60695-2-11:2014

Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammabil...

  EN 60695-10-2:2003

Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test

  EN 60695-10-2:2014

Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method

  EN 60695-10-3:2002

Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test

  EN 60695-11-2:2003

Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, c...

  EN 60695-11-2:2014

Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame: Apparatus, co...

  EN 60695-11-3:2012

Fire hazard testing - Part 11-3: Test flames - 500 W flames - Apparatus and confirmational...

  EN 60695-11-4:2011

Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational t...

  EN 60695-11-5:2005

Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confi...

  EN 60695-11-10:1999

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test me...

  EN 60695-11-10:2013

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test me...

  EN 60695-11-10:2013/AC:2014

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test me...

  EN 60695-11-20:1999

Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods

  EN 60695-11-20:2015

Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

  EN 60695-11-20:2015/AC:2016

Fire hazard testing - Part 11-20: Test flames - 500 W flame test method

  EN 60702-1:2002

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V -...

  EN 60702-2:2002

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V -...

  EN 60715:2001

Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for ...

  EN 60719:1993

Calculation of the lower and upper limits for the average outer dimensions of cables with ...

  EN 60728-11:2010

Cable networks for television signals, sound signals and interactive services - Part 11: S...

  EN 60730-1:2000

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:2000/A12:2003

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:2000/A2:2008

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:2000/AC:2007

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:2000/A13:2004

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:2000/A14:2005

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:2000/A1:2004

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:2011

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60730-1:1995

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A11:1996

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A14:1998

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A12:1996

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/AC:1997

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A15:1998

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/AC:2007

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A16:1999

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A17:2000

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A18:2003

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-2-2:2002

Automatic electrical controls for household and similar use - Part 2-2: Particular require...

  EN 60730-2-2:2002/A11:2005

Automatic electrical controls for household and similar use - Part 2-2: Particular require...

  EN 60730-2-3:2007

Automatic electrical controls for household and similar use - Part 2-3: Particular require...

  EN 60730-2-4:2007

Automatic electrical controls for household and similar use - Part 2-4: Particular require...

  EN 60730-2-5:2002

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60730-2-5:2002/A11:2005

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60730-2-5:2015

Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical...

  EN 60730-2-6:2008

Automatic electrical controls for household and similar use - Part 2-6: Particular require...

  EN 60730-2-6:2016

Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical...

  EN 60730-2-7:2010

Automatic electrical controls for household and similar use - Part 2-7: Particular require...

  EN 60730-2-7:2010/AC:2011

Automatic electrical controls for household and similar use - Part 2-7: Particular require...

  EN 60730-2-8:2002

Automatic electrical controls for household and similar use - Part 2-8: Particular require...

  EN 60730-2-9:2010

Automatic electrical controls for household and similar use - Part 2-9: Particular require...

  EN 60730-2-10:2007

Automatic electrical controls for household and similar use - Part 2-10: Particular requir...

  EN 60730-2-11:2008

Automatic electrical controls for household and similar use - Part 2-11: Particular requir...

  EN 60730-2-12:2006

Automatic electrical controls for household and similar use - Part 2-12: Particular requir...

  EN 60730-2-12:2006/A11:2008

Automatic electrical controls for household and similar use - Part 2-12: Particular requir...

  EN 60730-2-13:2008

Automatic electrical controls for household and similar use - Part 2-13: Particular requir...

  EN 60730-2-14:1997

Automatic electrical controls for household and similar use - Part 2-14: Particular requir...

  EN 60730-2-14:1997/A11:2005

Automatic electrical controls for household and similar use - Part 2-14: Particular requir...

  EN 60730-2-15:2010

Automatic electrical controls for household and similar use - Part 2-15: Particular requir...

  EN 60730-2-19:2002

Automatic electrical controls for household and similar use - Part 2-19: Particular requir...

  EN 60730-2-19:2002/A11:2005

Automatic electrical controls for household and similar use - Part 2-19: Particular requir...

  EN 60754-1:2014

Test on gases evolved during combustion of materials from cables - Part 1: Determination o...

  EN 60754-2:2014

Test on gases evolved during combustion of materials from cables - Part 2: Determination o...

  EN 60799:1998

Electrical accessories - Cord sets and interconnection cord sets

  EN 60811-100:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: Ge...

  EN 60811-201:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 201: Ge...

  EN 60811-202:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 202: Ge...

  EN 60811-203:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 203: Ge...

  EN 60811-301:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 301: El...

  EN 60811-302:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 302: El...

  EN 60811-401:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Mi...

  EN 60811-402:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Mi...

  EN 60811-403:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Mi...

  EN 60811-404:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Mi...

  EN 60811-405:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Mi...

  EN 60811-406:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Mi...

  EN 60811-407:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 407: Mi...

  EN 60811-408:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Mi...

  EN 60811-409:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Mi...

  EN 60811-410:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Mi...

  EN 60811-411:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Mi...

  EN 60811-412:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Mi...

  EN 60811-501:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 501: Me...

  EN 60811-502:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 502: Me...

  EN 60811-503:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 503: Me...

  EN 60811-504:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 504: Me...

  EN 60811-505:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 505: Me...

  EN 60811-506:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 506: Me...

  EN 60811-507:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 507: Me...

  EN 60811-508:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 508: Me...

  EN 60811-509:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 509: Me...

  EN 60811-510:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 510: Me...

  EN 60811-511:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 511: Me...

  EN 60811-512:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 512: Me...

  EN 60811-513:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 513: Me...

  EN 60811-601:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 601: Ph...

  EN 60811-602:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 602: Ph...

  EN 60811-603:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 603: Ph...

  EN 60811-604:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 604: Ph...

  EN 60811-605:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 605: Ph...

  EN 60811-606:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 606: Ph...

  EN 60811-607:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 607: Ph...

  EN 60825-1:2007

Safety of laser products - Part 1: Equipment classification and requirements

  EN 60825-1:2014

Safety of laser products - Part 1: Equipment classification and requirements

  EN 60825-2:2004

Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)

  EN 60825-4:2006

Safety of laser products - Part 4: Laser guards

  EN 60825-12:2004

Safety of laser products - Part 12: Safety of free space optical communication systems use...

  EN 60831-1:1996

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up...

  EN 60831-1:2014

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up...

  EN 60831-1:2014/AC:2014

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up...

  EN 60831-2:1996

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up...

  EN 60831-2:2014

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up...

  EN 60838-1:2004

Miscellaneous lampholders - Part 1: General requirements and tests

  EN 60838-2-1:1996

Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

  EN 60838-2-2:2006

Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

  EN 60898-1:2003

Electrical accessories - Circuit breakers for overcurrent protection for household and sim...

  EN 60898-1:2003/AC:2004

Electrical accessories - Circuit breakers for overcurrent protection for household and sim...

  EN 60898-1:2003/A11:2005

Electrical accessories - Circuit breakers for overcurrent protection for household and sim...

  EN 60898-1:2003/A13:2012

Electrical accessories - Circuit breakers for overcurrent protection for household and sim...

  EN 60898-2:2006

Electrical accessories - Circuit-breakers for overcurrent protection for household and sim...

  EN 60931-1:1996

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltag...

  EN 60931-2:1996

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltag...

  EN 60931-3:1996

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltag...

  EN 60934:2001

Circuit-breakers for equipment (CBE)

  EN 60947-1:2007

Low-voltage switchgear and controlgear - Part 1: General rules

  EN 60947-2:2006

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60947-3:2009

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnec...

  EN 60947-4-1:2010

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electro...

  EN 60947-4-2:2012

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semi...

  EN 60947-4-3:2000

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60947-4-3:2014

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60947-5-1:2004

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-1:2004/AC:2005

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-1:2004/AC:2004

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-2:2007

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching e...

  EN 60947-5-3:1999

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching e...

  EN 60947-5-4:2003

Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching e...

  EN 60947-5-5:1997

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 60947-5-5:1997/A11:2013

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 60947-5-7:2003

Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching e...

  EN 60947-5-8:2006

Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching e...

  EN 60947-5-9:2007

Low-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching e...

  EN 60947-6-1:2005

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer ...

  EN 60947-6-2:2003

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control a...

  EN 60947-7-1:2009

Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks f...

  EN 60947-7-2:2009

Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conduc...

  EN 60947-7-3:2009

Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requiremen...

  EN 60947-8:2003

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protec...

  EN 60950-1:2006

Information technology equipment - Safety - Part 1: General requirements

  EN 60950-1:2006/A12:2011

Information technology equipment - Safety - Part 1: General requirements

  EN 60950-1:2006/AC:2011

Information technology equipment - Safety - Part 1: General requirements

  EN 60950-1:2006/A11:2009

Information technology equipment - Safety - Part 1: General requirements

  EN 60950-21:2003

Information technology equipment - Safety - Part 21: Remote power feeding

  EN 60950-22:2006

Information technology equipment - Safety - Part 22: Equipment installed outdoors

  EN 60950-22:2006/AC:2008

Information technology equipment - Safety - Part 22: Equipment installed outdoors

  EN 60950-23:2006

Information technology equipment - Safety - Part 23: Large data storage equipment

  EN 60950-23:2006/AC:2008

Information technology equipment - Safety - Part 23: Large data storage equipment

  EN 60968:2013

Self-ballasted lamps for general lighting services - Safety requirements

  EN 60968:2013/A11:2014

Self-ballasted lamps for general lighting services - Safety requirements

  EN 60968:2015

Self-ballasted fluorescent lamps for general lighting services - Safety requirements

  EN 60974-1:2012

Arc welding equipment - Part 1: Welding power sources

  EN 60974-2:2008

Arc welding equipment - Part 2: Liquid cooling systems

  EN 60974-2:2013

Arc welding equipment - Part 2: Liquid cooling systems

  EN 60974-3:2007

Arc welding equipment - Part 3: Arc striking and stabilizing devices

  EN 60974-3:2014

Arc welding equipment - Part 3: Arc striking and stabilizing devices

  EN 60974-5:2008

Arc welding equipment - Part 5: Wire feeders

  EN 60974-5:2013

Arc welding equipment - Part 5: Wire feeders

  EN 60974-6:2011

Arc welding equipment - Part 6: Limited duty equipment

  EN 60974-6:2016

Arc welding equipment - Part 6: Limited duty equipment

  EN 60974-7:2005

Arc welding equipment - Part 7:Torches

  EN 60974-7:2013

Arc welding equipment - Part 7:Torches

  EN 60974-8:2009

Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems

  EN 60974-11:2010

Arc welding equipment - Part 11: Electrode holders

  EN 60974-12:2011

Arc welding equipment - Part 12: Coupling devices for welding cables

  EN 60974-13:2011

Arc welding equipment - Part 13: Welding clamp

  EN 60998-1:2004

Connecting devices for low-voltage circuits for household and similar purposes - Part 1: G...

  EN 60998-2-1:2004

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1:...

  EN 60998-2-2:2004

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2:...

  EN 60998-2-3:2004

Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3:...

  EN 60998-2-4:2005

Connecting devices for low voltage circuits for household and similar purposes - Part 2-4:...

  EN 60999-1:2000

Connecting devices - Electrical copper conductors - Safety requirements for screw-type and...

  EN 60999-2:2003

Connecting devices - Electrical copper conductors - Safety requirements for screw-type and...

  EN 61008-1:2004

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2004/A11:2007

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2004/A12:2009

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2012

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2012/A11:2015

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-2-1:1994

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-2-1:1994/A11:1998

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-2-1:1994/A11:1998/AC:1999

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61009-1:2004

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/AC:2006

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/A11:2008

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/A13:2009

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/A12:2009

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2012

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2012/A11:2015

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-2-1:1994

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-2-1:1994/A11:1998/AC:1999

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-2-1:1994/A11:1998

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61010-1:2010

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-010:2003

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-010:2014

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-020:2006

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-030:2010

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-032:2012

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-033:2012

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-040:2005

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-051:2003

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-051:2015

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-061:2003

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-2-061:2015

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-081:2002

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-081:2015

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-091:2012

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-091:2012/AC:2013

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-201:2013

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-2-201:2013/AC:2013

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-031:2002

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-031:2015

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61028:1993

Electrical measuring instruments - X-Y recorders

  EN 61034-1:2005

Measurement of smoke density of cables burning under defined conditions - Part 1: Test app...

  EN 61034-2:2005

Measurement of smoke density of cables burning under defined conditions - Part 2: Test pro...

  EN 61048:2006

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp...

  EN 61050:1992

Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (g...

  EN 61058-1:2002

Switches for appliances - Part 1: General requirements

  EN 61058-2-1:2011

Switches for appliances - Part 2-1: Particular requirements for cord switches

  EN 61058-2-4:2005

Switches for appliances - Part 2-4: Particular requirements for independently mounted swit...

  EN 61058-2-5:2011

Switches for appliances - Part 2-5: Particular requirements for change-over selectors

  EN 61071:2007

Capacitors for power electronics

  EN 61095:2009

Electromechanical contactors for household and similar purposes

  EN 61131-2:2007

Programmable controllers - Part 2: Equipment requirements and tests

  EN 61138:2007

Cables for portable earthing and short-circuiting equipment

  EN 61140:2002

Protection against electric shock - Common aspects for installation and equipment

  EN 61143-1:1994

Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements

  EN 61143-2:1994

Electrical measuring instruments - X-t recorders - Part 2: Recommended additional test met...

  EN 61184:2008

Bayonet lampholders

  EN 61184:2008/A1:2011

Bayonet lampholders

  EN 61187:1994

Electrical and electronic measuring equipment - Documentation

  EN 61187:1994/AC:1995

Electrical and electronic measuring equipment - Documentation

  EN 61195:1999

Double-capped fluorescent lamps - Safety specifications

  EN 61199:2011

Single-capped fluorescent lamps - Safety specifications

  EN 61204:1995

Low-voltage power supply devices, d.c. output - Performance characteristics

  EN 61204-7:2006

Low voltage power supplies, d.c. output - Part 7: Safety requirements

  EN 61204-7:2006/A11:2009

Low voltage power supplies, d.c. output - Part 7: Safety requirements

  EN 61210:2010

Connecting devices - Flat quick-connect terminations for electrical copper conductors - Sa...

  EN 61230:2008

Live working - Portable equipment for earthing or earthing and short-circuiting

  EN 61242:1997

Electrical accessories - Cable reels for household and similar purposes

  EN 61242:1997/A1:2008/AC:2010

Electrical accessories - Cable reels for household and similar purposes

  EN 61243-3:2010

Live working - Voltage detectors - Part 3: Two-pole low-voltage type

  EN 61243-3:2014

Live working - Voltage detectors - Part 3: Two-pole low-voltage type

  EN 61243-3:2014/AC:2015

Live working - Voltage detectors - Part 3: Two-pole low-voltage type

  EN 61270-1:1996

Capacitors for microwave ovens - Part 1: General

  EN 61293:1994

Marking of electrical equipment with ratings related to electrical supply - Safety require...

  EN 61310-1:2008

Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual,...

  EN 61310-2:2008

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

  EN 61310-3:2008

Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the loc...

  EN 61316:1999

Industrial cable reels

  EN 61347-1:2008

Lamp controlgear - Part 1: General and safety requirements

  EN 61347-1:2015

Lamp controlgear - Part 1: General and safety requirements

  EN 61347-2-2:2012

Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic ...

  EN 61347-2-3:2011

Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electr...

  EN 61347-2-3:2011/AC:2011

Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electr...

  EN 61347-2-7:2012

Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic contr...

  EN 61347-2-8:2001

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

  EN 61347-2-8:2001/AC:2003

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

  EN 61347-2-8:2001/AC:2010

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

  EN 61347-2-9:2013

Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for d...

  EN 61347-2-10:2001

Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convert...

  EN 61347-2-10:2001/AC:2010

Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convert...

  EN 61347-2-11:2001

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuit...

  EN 61347-2-11:2001/AC:2002

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuit...

  EN 61347-2-11:2001/AC:2010

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuit...

  EN 61347-2-12:2005

Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic...

  EN 61347-2-12:2005/AC:2010

Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic...

  EN 61347-2-13:2006

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic...

  EN 61347-2-13:2006/AC:2010

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic...

  EN 61347-2-13:2014

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic...

  EN 61386-1:2008

Conduit systems for cable management - Part 1: General requirements

  EN 61386-21:2004

Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit sy...

  EN 61386-21:2004/A11:2010

Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit sy...

  EN 61386-21:2004/AC:2004

Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit sy...

  EN 61386-22:2004

Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit ...

  EN 61386-22:2004/AC:2004

Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit ...

  EN 61386-22:2004/A11:2010

Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit ...

  EN 61386-23:2004

Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit...

  EN 61386-23:2004/A11:2010

Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit...

  EN 61386-23:2004/AC:2004

Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit...

  EN 61386-24:2010

Conduit systems for cable management - Part 24: Particular requirements - Conduit systems ...

  EN 61386-25:2011

Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing d...

  EN 61439-1:2011

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

  EN 61439-2:2011

Low-voltage switchgear and controlgear assemblies - Part 2: Power switchgear and controlge...

  EN 61439-3:2012

Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended t...

  EN 61439-4:2013

Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for as...

  EN 61439-5:2011

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribut...

  EN 61439-5:2015

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribut...

  EN 61439-5:2015/AC:2015

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribut...

  EN 61439-6:2012

Low-voltage switchgear and controlgear assemblies - Part 6: Busbar trunking systems (buswa...

  EN 61534-1:2011

Powertrack systems - Part 1: General requirements

  EN 61534-21:2006

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for ...

  EN 61534-21:2014

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for ...

  EN 61534-22:2009

Powertrack systems - Part 22: Particular requirements for powertrack systems intended for ...

  EN 61534-22:2014

Powertrack systems - Part 22: Particular requirements for powertrack systems intended for ...

  EN 61535:2009

Installation couplers intended for permanent connection in fixed installations

  EN 61537:2007

Cable management - Cable tray systems and cable ladder systems

  EN 61549:2003

Miscellaneous lamps

  EN 61557-1:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-2:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-3:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-4:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-5:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-6:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-7:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-8:2007

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-8:2015

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-9:2009

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-9:2015

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-10:2001

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-10:2013

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-11:2009

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-12:2008

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-13:2011

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-14:2013

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-15:2014

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61557-16:2015

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN 61558-1:1997

Safety of power transformers, power supply units and similar - Part 1: General requirement...

  EN 61558-1:1997/A11:2003

Safety of power transformers, power supply units and similar - Part 1: General requirement...

  EN 61558-1:1997/AC:2003

Safety of power transformers, power supply units and similar - Part 1: General requirement...

  EN 61558-1:2005

Safety of power transformers, power supplies, reactors and similar products - Part 1: Gene...

  EN 61558-1:2005/AC:2006

Safety of power transformers, power supplies, reactors and similar products - Part 1: Gene...

  EN 61558-2-1:2007

Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Pa...

  EN 61558-2-2:2007

Safety of power transformers, power supplies, reactors and similar products - Part 2-2: Pa...

  EN 61558-2-3:2010

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3:...

  EN 61558-2-4:2009

Safety of transformers, reactors, power supply units and similar products for supply volta...

  EN 61558-2-5:2010

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: ...

  EN 61558-2-6:2009

Safety of transformers, reactors, power supply units and similar products for supply volta...

  EN 61558-2-7:2007

Safety of power transformers, power supplies, reactors and similar products - Part 2-7: Pa...

  EN 61558-2-8:2010

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8:...

  EN 61558-2-9:2011

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: ...

  EN 61558-2-12:2011

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-12:...

  EN 61558-2-13:2009

Safety of transformers, reactors, power supply units and similar products for supply volta...

  EN 61558-2-14:2013

Safety of transformers, reactors, power supply units and combination thereof - Part 2-14: ...

  EN 61558-2-15:2012

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15...

  EN 61558-2-16:2009

Safety of transformers, reactors, power supply units and similar products for supply volta...

  EN 61558-2-20:2011

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20:...

  EN 61558-2-23:2010

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23:...

  EN 61558-2-26:2013

Safety of transformers, reactors, power supply units and combinations thereof - Part 2-26:...

  EN 61643-11:2012

Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-...

  EN 61643-21:2001

Low voltage surge protective devices - Part 21: Surge protective devices connected to tele...

  EN 61730-1:2007

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

  EN 61730-1:2007/A11:2014

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

  EN 61730-2:2007

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

  EN 61770:2009

Electric appliances connected to the water mains - Avoidance of backsiphonage and failure ...

  EN 61770:2009/AC:2011

Electric appliances connected to the water mains - Avoidance of backsiphonage and failure ...

  EN 61800-5-1:2007

Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electric...

  EN 61812-1:2011

Time relays for industrial and residential use - Part 1: Requirements and tests

  EN 61851-1:2011

Electric vehicle conductive charging system - Part 1: General requirements

  EN 61851-21:2002

Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for c...

  EN 61851-22:2002

Electric vehicle conductive charging system - Part 22: AC electric vehicle charging statio...

  EN 61851-23:2014

Electric vehicle conductive charging system - Part 23: DC electric vehicle charging statio...

  EN 61851-24:2014

Electric vehicle conductive charging system - Part 24: Digital communication between a d.c...

  EN 61851-24:2014/AC:2015

Electric vehicle conductive charging system - Part 24: Digital communication between a d.c...

  EN 61869-1:2009

Instrument transformers - Part 1: General requirements

  EN 61869-2:2012

Instrument transformers - Part 2: Additional requirements for current transformers

  EN 61869-3:2011

Instrument transformers - Part 3: Additional requirements for inductive voltage transforme...

  EN 61869-4:2014

Instrument transformers - Part 4: Additional requirements for combined transformers

  EN 61869-4:2014/AC:2014

Instrument transformers - Part 4: Additional requirements for combined transformers

  EN 61869-5:2011

Instrument transformers - Part 5: Additional requirements for capacitor voltage transforme...

  EN 61869-5:2011/AC:2015

Instrument transformers - Part 5: Additional requirements for capacitor voltage transforme...

  EN 61914:2009

Cable cleats for electrical installations

  EN 61914:2009/AC:2009

Cable cleats for electrical installations

  EN 61914:2016

Cable cleats for electrical installations

  EN 61921:2003

Power capacitors - Low-voltage power factor correction banks

  EN 61995-1:2008

Devices for the connection of luminaires for household and similar purposes - Part 1: Gene...

  EN 61995-2:2009

Devices for the connection of luminaires for household and similar purposes - Part 2: Stan...

  EN 62020:1998

Electrical accessories - Residual current monitors for household and similar uses (RCMs)

  EN 62026-1:2007

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: Gen...

  EN 62026-2:2013

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Act...

  EN 62026-3:2009

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: Dev...

  EN 62026-3:2015

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: Dev...

  EN 62026-7:2013

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: Com...

  EN 62031:2008

LED modules for general lighting - Safety specifications

  EN 62035:2000

Discharge lamps (excluding fluorescent lamps) - Safety specifications

  EN 62035:2014

Discharge lamps (excluding fluorescent lamps) - Safety specifications

  EN 62040-1:2008

Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS

  EN 62040-1:2008/AC:2009

Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS

  EN 62080:2009

Sound signalling devices for household and similar purposes

  EN 62094-1:2003

Indicator light units for household and similar fixed-electrical installations - Part 1: G...

  EN 62094-1:2003/A11:2003

Indicator light units for household and similar fixed-electrical installations - Part 1: G...

  EN 62109-1:2010

Safety of power converters for use in photovoltaic power systems - Part 1: General require...

  EN 62109-2:2011

Safety of power converters for use in photovoltaic power systems - Part 2: Particular requ...

  EN 62135-1:2008

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and ins...

  EN 62135-1:2015

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and ins...

  EN 62196-1:2012

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-1:2012/A12:2014

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-1:2012/A11:2013

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-1:2012/AC:2012

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-1:2014

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-2:2012

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-2:2012/A11:2013

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-2:2012/A12:2014

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-2:2012/A12:2014/AC:2014

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62196-3:2014

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of elec...

  EN 62208:2011

Empty enclosures for low-voltage switchgear and controlgear assemblies - General requireme...

  EN 62233:2008

Measurement methods for electromagnetic fields of household appliances and similar apparat...

  EN 62233:2008/AC:2008

Measurement methods for electromagnetic fields of household appliances and similar apparat...

  EN 62253:2011

Photovoltaic pumping systems - Design qualification and performance measurements

  EN 62275:2009

Cable management systems - Cable ties for electrical installations

  EN 62275:2015

Cable management systems - Cable ties for electrical installations

  EN 62282-3-100:2012

Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety

  EN 62282-3-300:2012

Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation

  EN 62282-5-1:2012

Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety

  EN 62310-1:2005

Static transfer systems (STS) - Part 1: General and safety requirements

  EN 62311:2008

Assessment of electronic and electrical equipment related to human exposure restrictions f...

  EN 62368-1:2014

Audio/video, information and communication technology equipment - Part 1: Safety requirem...

  EN 62368-1:2014/AC:2015

Audio/video, information and communication technology equipment - Part 1: Safety requirem...

  EN 62395-1:2006

Electrical resistance trace heating systems for industrial and commercial applications - P...

  EN 62395-1:2013

Electrical resistance trace heating systems for industrial and commercial applications - P...

  EN 62423:2009

Type B residual current operated circuit-breakers with and without integral overcurrent pr...

  EN 62423:2012

Type F and type B residual current operated circuit-breakers with and without integral ove...

  EN 62444:2013

Cable glands for electrical installations

  EN 62471:2008

Photobiological safety of lamps and lamp systems

  EN 62477-1:2012

Safety requirements for power electronic converter systems and equipment - Part 1: General

  EN 62477-1:2012/A11:2014

Safety requirements for power electronic converter systems and equipment - Part 1: General

  EN 62479:2010

Assessment of the compliance of low power electronic and electrical equipment with the bas...

  EN 62493:2010

Assessment of lighting equipment related to human exposure to electromagnetic fields

  EN 62532:2011

Fluorescent induction lamps - Safety specifications

  EN 62549:2011

Articulated systems and flexible systems for cable guiding

  EN 62560:2012

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specific...

  EN 62560:2012/A1:2015/AC:2015

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specific...

  EN 62560:2012/AC:2015

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specific...

  EN 62606:2013

General requirements for arc fault detection devices

  EN 62626-1:2014

Low-voltage switchgear and controlgear enclosed equipment - Part 1: Enclosed switch-discon...

  HD 62640:2015

Residual current devices with or without overcurrent protection for socket-outlets for hou...

  EN 62776:2015

Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specificati...

  EN 62868:2015

Organic light emitting diode (OLED) panels for general lighting - Safety requirements

  EN 50581:2012

Technical documentation for the assessment of electrical and electronic products with resp...

  EN ISO 12100:2010

Safety of machinery - General principles for design - Risk assessment and risk reduction (...

  EN 349:1993/A1:2008

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

  EN 547-1:1996/A1:2008

Safety of machinery - Human body measurements - Part 1: Principles for determining the dim...

  EN 547-2:1996/A1:2008

Safety of machinery - Human body measurements - Part 2: Principles for determining the dim...

  EN 547-3:1996/A1:2008

Safety of machinery - Human body measurements - Part 3: Anthropometric data

  EN 574:1996/A1:2008

Safety of machinery - Two-hand control devices - Functional aspects - Principles for desig...

  EN 614-1:2006/A1:2009

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general princi...

  EN 614-2:2000/A1:2008

Safety of machinery - Ergonomic design principles - Part 2: Interactions between the desig...

  EN 842:1996/A1:2008

Safety of machinery - Visual danger signals - General requirements, design and testing

  EN 894-1:1997/A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actua...

  EN 894-2:1997/A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actua...

  EN 894-3:2000/A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actua...

  EN 894-4:2010

Safety of machinery - Ergonomics requirements for the design of displays and control actua...

  EN 981:1996/A1:2008

Safety of machinery - System of auditory and visual danger and information signals

  EN 1005-1:2001/A1:2008

Safety of machinery - Human physical performance - Part 1: Terms and definitions

  EN 1005-2:2003/A1:2008

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery an...

  EN 1005-3:2002/A1:2008

Safety of machinery - Human physical performance - Part 3: Recommended force limits for ma...

  EN 1005-4:2005/A1:2008

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures ...

  EN 1032:2003/A1:2008

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emi...

  EN 1037:1995/A1:2008

Safety of machinery - Prevention of unexpected start-up

  EN 1093-1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1...

  EN 1093-2:2006/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2...

  EN 1093-3:2006/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3...

  EN 1093-4:1996/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4...

  EN 1093-6:1998/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6...

  EN 1093-7:1998/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7...

  EN 1093-8:1998/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8...

  EN 1093-9:1998/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9...

  EN 1093-11:2001/A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1...

  EN 1127-1:2011

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and m...

  EN 1127-2:2014

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and m...

  EN 1299:1997/A1:2008

Mechanical vibration and shock - Vibration isolation of machines - Information for the app...

  EN 1837:1999/A1:2009

Safety of machinery - Integral lighting of machines

  EN ISO 3741:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources u...

  EN ISO 3743-1:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources u...

  EN ISO 3743-2:2009

Acoustics - Determination of sound power levels of noise sources using sound pressure - En...

  EN ISO 3744:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources u...

  EN ISO 3745:2012

Acoustics - Determination of sound power levels and sound energy levels of noise sources u...

  EN ISO 3745:2012/A1:2017

Acoustics - Determination of sound power levels and sound energy levels of noise sources u...

  EN ISO 3746:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources u...

  EN ISO 3747:2010

Acoustics - Determination of sound power levels and sound energy levels of noise sources u...

  EN ISO 4413:2010

Hydraulic fluid power - General rules and safety requirements for systems and their compon...

  EN ISO 4414:2010

Pneumatic fluid power - General rules and safety requirements for systems and their compon...

  EN ISO 4871:2009

Acoustics - Declaration and verification of noise emission values of machinery and equipme...

  EN ISO 5136:2009

Acoustics - Determination of sound power radiated into a duct by fans and other air-moving...

  EN ISO 7235:2009

Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units ...

  EN ISO 7731:2008

Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:...

  EN ISO 9614-1:2009

Acoustics - Determination of sound power levels of noise sources using sound intensity - P...

  EN ISO 9614-3:2009

Acoustics - Determination of sound power levels of noise sources using sound intensity - P...

  EN ISO 10326-1:2016

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: B...

  EN ISO 11161:2007

Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:200...

  EN ISO 11161:2007/A1:2010

Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:200...

  EN ISO 11200:2014

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic sta...

  EN ISO 11201:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pre...

  EN ISO 11202:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pre...

  EN ISO 11203:2009

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pre...

  EN ISO 11204:2010

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pre...

  EN ISO 11205:2009

Acoustics - Noise emitted by machinery and equipment - Engineering method for the determin...

  EN ISO 11546-1:2009

Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measure...

  EN ISO 11546-2:2009

Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measure...

  EN ISO 11688-1:2009

Acoustics - Recommended practice for the design of low-noise machinery and equipment - Par...

  EN ISO 11691:2009

Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory su...

  EN ISO 11957:2009

Acoustics - Determination of sound insulation performance of cabins - Laboratory and in si...

  EN 12198-1:2000/A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by ...

  EN 12198-2:2002/A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by ...

  EN 12198-3:2002/A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by ...

  EN 12254:2010

Screens for laser working places - Safety requirements and testing

  EN 12254:2010/AC:2011

Screens for laser working places - Safety requirements and testing

  EN 12786:2013

Safety of machinery - Requirements for the drafting of the vibration clauses of safety sta...

  EN 13490:2001/A1:2008

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of oper...

  EN ISO 13732-1:2008

Ergonomics of the thermal environment - Methods for the assessment of human responses to c...

  EN ISO 13732-3:2008

Ergonomics of the thermal environment - Methods for the assessment of human responses to c...

  EN ISO 13753:2008

Mechanical vibration and shock - Hand-arm vibration - Method for measuring the vibration t...

  EN ISO 13849-1:2015

Safety of machinery - Safety-related parts of control systems - Part 1: General principles...

  EN ISO 13849-2:2012

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13...

  EN ISO 13850:2015

Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015)

  EN ISO 13855:2010

Safety of machinery - Positioning of safeguards with respect to the approach speeds of par...

  EN ISO 13856-1:2013

Safety of machinery - Pressure-sensitive protective devices - Part 1: General principles f...

  EN ISO 13856-2:2013

Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles f...

  EN ISO 13856-3:2013

Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles f...

  EN ISO 13857:2008

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and ...

  EN ISO 14119:2013

Safety of machinery - Interlocking devices associated with guards - Principles for design ...

  EN ISO 14120:2015

Safety of machinery - Guards - General requirements for the design and construction of fix...

  EN ISO 14122-1:2016

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed mea...

  EN ISO 14122-2:2016

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms a...

  EN ISO 14122-3:2016

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders...

  EN ISO 14122-4:2016

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO ...

  EN ISO 14123-1:2015

Safety of machinery - Reduction of risks to health resulting from hazardous substances emi...

  EN ISO 14123-2:2015

Safety of machinery - Reduction of risks to health resulting from hazardous substances emi...

  EN ISO 14159:2008

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

  EN ISO 14738:2008

Safety of machinery - Anthropometric requirements for the design of workstations at machin...

  EN ISO 15536-1:2008

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 1553...

  EN 15967:2011

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases...

  EN 16590-1:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control syst...

  EN 16590-2:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control syst...

  EN ISO 19353:2016

Safety of machinery - Fire prevention and fire protection (ISO 19353:2015)

  EN ISO 20643:2008

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of ...

  EN ISO 20643:2008/A1:2012

Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of ...

  EN 81-3:2000/A1:2008

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraul...

  EN 81-3:2000/A1:2008/AC:2009

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraul...

  EN 81-31:2010

Safety rules for the construction and installation of lifts - Lifts for the transport of g...

  EN 81-40:2008

Safety rules for the construction and installation of lifts - Special lifts for the transp...

  EN 81-41:2010

Safety rules for the construction and installation of lifts - Special lifts for the transp...

  EN 81-43:2009

Safety rules for the construction and installation of lifts - Special lifts for the transp...

  EN 115-1:2017

Safety of escalators and moving walks - Part 1: Construction and installation

  EN 201:2009

Plastics and rubber machines - Injection moulding machines - Safety requirements

  EN 267:2009/A1:2011

Automatic forced draught burners for liquid fuels

  EN 280:2013/A1:2015

Mobile elevating work platforms - Design calculations - Stability criteria - Construction ...

  EN 289:2014

Plastics and rubber machines - Compression moulding machines and transfer moulding machine...

  EN 303-5:2012

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stok...

  EN 378-2:2016

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Des...

  EN 415-1:2014

Safety of packaging machines - Part 1: Terminology and classification of packaging machine...

  EN 415-3:1999/A1:2009

Safety of packaging machines - Part 3: Form, fill and seal machines

  EN 415-5:2006/A1:2009

Safety of packaging machines - Part 5: Wrapping machines

  EN 415-6:2013

Safety of packaging machines - Part 6: Pallet wrapping machines

  EN 415-7:2006/A1:2008

Safety of packaging machines - Part 7: Group and secondary packaging machines

  EN 415-8:2008

Safety of packaging machines - Part 8: Strapping machines

  EN 415-9:2009

Safety of packaging machines - Part 9: Noise measurement methods for packaging machines, p...

  EN 415-10:2014

Safety of packaging machines - Part 10: General Requirements

  EN 422:2009

Plastics and rubber machines - Blow moulding machines - Safety requirements

  EN 453:2014

Food processing machinery - Dough mixers - Safety and hygiene requirements

  EN 454:2014

Food processing machinery - Planetary mixers - Safety and hygiene requirements

  EN 474-1:2006/A4:2013

Earth-moving machinery - Safety - Part 1: General requirements

  EN 474-1:2006/A4:2013/AC:2014

Earth-moving machinery - Safety - Part 1: General requirements

  EN 474-2:2006/A1:2008

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

  EN 474-3:2006/A1:2009

Earth-moving machinery - Safety - Part 3: Requirements for loaders

  EN 474-4:2006/A2:2012

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

  EN 474-5:2006/A3:2013

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

  EN 474-6:2006/A1:2009

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

  EN 474-7:2006/A1:2009

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

  EN 474-8:2006/A1:2009

Earth-moving machinery - Safety - Part 8: Requirements for graders

  EN 474-9:2006/A1:2009

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

  EN 474-10:2006/A1:2009

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

  EN 474-11:2006/A1:2008

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

  EN 474-12:2006/A1:2008

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

  EN 500-1:2006/A1:2009

Mobile road construction machinery - Safety - Part 1: Common requirements

  EN 500-2:2006/A1:2008

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milli...

  EN 500-3:2006/A1:2008

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabi...

  EN 500-4:2011

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction...

  EN 500-6:2006/A1:2008

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-fini...

  EN 528:2008

Rail dependent storage and retrieval equipment - Safety requirements

  EN 536:2015

Road construction machines - Mixing plants for road construction materials - Safety requir...

  EN 609-1:2017

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

  EN 609-2:1999/A1:2009

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters

  EN 617:2001/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for the equipment ...

  EN 618:2002/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 619:2002/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 620:2002/A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt con...

  EN 676:2003/A2:2008

Automatic forced draught burners for gaseous fuels

  EN 676:2003/A2:2008/AC:2008

Automatic forced draught burners for gaseous fuels

  EN 690:2013

Agricultural machinery - Manure spreaders - Safety

  EN 692:2005/A1:2009

Machine tools - Mechanical presses - Safety

  EN 693:2001/A2:2011

Machine tools - Safety - Hydraulic presses

  EN 703:2004/A1:2009

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines ...

  EN 706:1996/A1:2009

Agricultural machinery - Vine shoot tipping machines - Safety

  EN 707:1999/A1:2009

Agricultural machinery - Slurry tankers - Safety

  EN 709:1997/A4:2009

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary c...

  EN 709:1997/A4:2009/AC:2012

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary c...

  EN 710:1997/A1:2010

Safety requirements for foundry moulding and coremaking machinery and plant associated equ...

  EN 710:1997/A1:2010/AC:2012

Safety requirements for foundry moulding and coremaking machinery and plant associated equ...

  EN 741:2000/A1:2010

Continuous handling equipment and systems - Safety requirements for systems and their comp...

  EN 746-1:1997/A1:2009

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial ...

  EN 746-2:2010

Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fue...

  EN 746-3:1997/A1:2009

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and...

  EN 786:1996/A2:2009

Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn e...

  EN 792-13:2000/A1:2008

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

  EN 285:2006/A2:2009

Sterilization - Steam sterilizers - Large sterilizers

  EN 455-1:2000

Medical gloves for single use - Part 1: Requirements and testing for freedom from holes

  EN 455-2:2009/A2:2013

Medical gloves for single use - Part 2: Requirements and testing for physical properties

  EN 455-3:2006

Medical gloves for single use - Part 3: Requirements and testing for biological evaluation

  EN 455-4:2009

Medical gloves for single use - Part 4: Requirements and testing for shelf life determinat...

  EN 556-1:2001

Sterilization of medical devices - Requirements for medical devices to be designated "STER...

  EN 556-1:2001/AC:2006

Sterilization of medical devices - Requirements for medical devices to be designated "STER...

  EN 556-2:2015

Sterilization of medical devices - Requirements for medical devices to be designated ''STE...

  EN 794-3:1998/A2:2009

Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators

  EN 1041:2008

Information supplied by the manufacturer of medical devices

  EN 1060-3:1997/A2:2009

Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical...

  EN 1060-4:2004

Non-invasive sphygmomanometers - Part 4: Test procedures to determine the overall system a...

  EN ISO 1135-4:2011

Transfusion equipment for medical use - Part 4: Transfusion sets for single use (ISO 1135-...

  EN 1282-2:2005/A1:2009

Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified)

  EN 1422:1997/A1:2009

Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test meth...

  EN 1618:1997

Catheters other than intravascular catheters - Test methods for common properties

  EN 1639:2009

Dentistry - Medical devices for dentistry - Instruments

  EN 1640:2009

Dentistry - Medical devices for dentistry - Equipment

  EN 1641:2009

Dentistry - Medical devices for dentistry - Materials

  EN 1642:2011

Dentistry - Medical devices for dentistry - Dental implants

  EN 1707:1996

Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical e...

  EN 1782:1998/A1:2009

Tracheal tubes and connectors

  EN 1789:2007/A1:2010

Medical vehicles and their equipment - Road ambulances

  EN 1820:2005/A1:2009

Anaesthetic reservoir bags (ISO 5362:2000, modified)

  EN 1865-1:2010/A1:2015

Patient handling equipment used in road ambulances - Part 1: General stretcher systems and...

  EN 1865-2:2010/A1:2015

Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher

  EN 1865-3:2012

Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher

  EN 1865-4:2012

Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer cha...

  EN 1865-5:2012

Patient handling equipment used in road ambulances - Part 5: Stretcher support

  EN 1985:1998

Walking aids - General requirements and test methods

  EN ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components - Part 2: Graphical s...

  EN ISO 3826-3:2007

Plastics collapsible containers for human blood and blood components - Part 3: Blood bag s...

  EN ISO 3826-4:2015

Plastics collapsible containers for human blood and blood components - Part 4: Aphaeresis ...

  EN ISO 4074:2002

Natural latex rubber condoms - Requirements and test methods (ISO 4074:2002)

  EN ISO 4135:2001

Anaesthetic and respiratory equipment - Vocabulary (ISO 4135:2001)

  EN ISO 5359:2008

Low-pressure hose assemblies for use with medical gases (ISO 5359:2008)

  EN ISO 5359:2008/A1:2011

Low-pressure hose assemblies for use with medical gases (ISO 5359:2008)

  EN ISO 5360:2009

Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2006)

  EN ISO 5366-1:2009

Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors ...

  EN ISO 5840:2009

Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005)

  EN ISO 7197:2009

Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197...

  EN ISO 7376:2009

Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:20...

  EN ISO 7396-1:2007

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and v...

  EN ISO 7396-1:2007/A1:2010

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and v...

  EN ISO 7396-1:2007/A2:2010

Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and v...

  EN ISO 7396-2:2007

Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 73...

  EN ISO 7886-3:2009

Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose ...

  EN ISO 7886-4:2009

Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention featu...

  EN ISO 8185:2009

Respiratory tract humidifiers for medical use - Particular requirements for respiratory hu...

  EN ISO 8359:2009

Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996)

  EN ISO 8359:2009/A1:2012

Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996)

  EN ISO 8835-2:2009

Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007)

  EN ISO 8835-3:2009

Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaest...

  EN ISO 8835-3:2009/A1:2010

Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaest...

  EN ISO 8835-4:2009

Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO 8835-4...

  EN ISO 8835-5:2009

Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004)

  EN ISO 9170-1:2008

Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with comp...

  EN ISO 9170-2:2008

Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic g...

  EN ISO 9360-1:2009

Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifyin...

  EN ISO 9360-2:2009

Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifyin...

  EN ISO 9713:2009

Neurosurgical implants - Self-closing intracranial aneurysm clips (ISO 9713:2002)

  EN ISO 10079-1:2009

Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requir...

  EN ISO 10079-2:2009

Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999)

  EN ISO 10079-3:2009

Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure so...

  EN ISO 10328:2016

Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods ...

  EN ISO 10524-1:2006

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure ...

  EN ISO 10524-2:2006

Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regula...

  EN ISO 10524-3:2006

Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated wi...

  EN ISO 10524-4:2008

Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 1052...

  EN ISO 10535:2006

Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:200...

  EN ISO 10555-1:2009

Sterile, single-use intravascular catheters - Part 1: General requirements (ISO 10555-1:19...

  EN ISO 10651-2:2009

Lung ventilators for medical use - Particular requirements for basic safety and essential ...

  EN ISO 10651-4:2009

Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO...

  EN ISO 10651-6:2009

Lung ventilators for medical use - Particular requirements for basic safety and essential ...

  EN ISO 10993-1:2009

Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk ma...

  EN ISO 10993-1:2009/AC:2010

Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk ma...

  EN ISO 10993-3:2014

Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity...

  EN ISO 10993-4:2009

Biological evaluation of medical devices - Part 4: Selection of tests for interactions wit...

  EN ISO 10993-5:2009

Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10...

  EN ISO 10993-6:2009

Biological evaluation of medical devices - Part 6: Tests for local effects after implantat...

  EN ISO 10993-7:2008

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals ...

  EN ISO 10993-7:2008/AC:2009

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals ...

  EN ISO 10993-9:2009

Biological evaluation of medical devices - Part 9: Framework for identification and quanti...

  EN ISO 10993-11:2009

Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993...

  EN ISO 10993-12:2012

Biological evaluation of medical devices - Part 12: Sample preparation and reference mater...

  EN ISO 10993-13:2010

Biological evaluation of medical devices - Part 13: Identification and quantification of d...

  EN ISO 10993-14:2009

Biological evaluation of medical devices - Part 14: Identification and quantification of d...

  EN ISO 10993-15:2009

Biological evaluation of medical devices - Part 15: Identification and quantification of d...

  EN ISO 10993-16:2010

Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degrada...

  EN ISO 10993-17:2009

Biological evaluation of medical devices - Part 17: Establishment of allowable limits for ...

  EN ISO 10993-18:2009

Biological evaluation of medical devices - Part 18: Chemical characterization of materials...

  EN ISO 11135-1:2007

Sterilization of health care products - Ethylene oxide - Part 1: Requirements for developm...

  EN ISO 11137-1:2015

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11137-2:2015

Sterilization of health care products - Radiation - Part 2: Establishing the sterilization...

  EN ISO 11138-2:2009

Sterilization of health care products - Biological indicators - Part 2: Biological indicat...

  EN ISO 11138-3:2009

Sterilization of health care products - Biological indicators - Part 3: Biological indicat...

  EN ISO 11140-1:2009

Sterilization of health care products - Chemical indicators - Part 1: General requirements...

  EN ISO 11140-3:2009

Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator sy...

  EN ISO 11197:2009

Medical supply units (ISO 11197:2004)

  EN ISO 11607-1:2009

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, ...

  EN ISO 11607-2:2006

Packaging for terminally sterilized medical devices - Part 2: Validation requirements for ...

  EN ISO 11737-1:2006

Sterilization of medical devices - Microbiological methods - Part 1: Determination of a po...

  EN ISO 11737-1:2006/AC:2009

Sterilization of medical devices - Microbiological methods - Part 1: Determination of a po...

  EN ISO 11737-2:2009

Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility pe...

  EN ISO 11810-1:2009

Lasers and laser-related equipment - Test method and classification for the laser resistan...

  EN ISO 11810-2:2009

Lasers and laser-related equipment - Test method and classification for the laser-resistan...

  EN ISO 11979-8:2009

Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO 11979-8:2...

  EN ISO 11990-1:2014

Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes -...

  EN ISO 11990-2:2014

Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes -...

  EN 12006-2:1998/A1:2009

Non active surgical implants - Particular requirements for cardiac and vascular implants -...

  EN 12006-3:1998/A1:2009

Non active surgical implants - Particular requirements for cardiac and vascular implants -...

  EN 12183:2009

Manual wheelchairs - Requirements and test methods

  EN 12184:2009

Electrically powered wheelchairs, scooters and their chargers - Requirements and test meth...

  EN 12342:1998/A1:2009

Breathing tubes intended for use with anaesthetic apparatus and ventilators

  EN 12470-1:2000/A1:2009

Clinical thermometers - Part 1: Metallic liquid-in-glass thermometers with maximum device

  EN 12470-2:2000/A1:2009

Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers

  EN 12470-3:2000/A1:2009

Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predic...

  EN 12470-4:2000/A1:2009

Clinical thermometers - Part 4: Performance of electrical thermometers for continuous meas...

  EN 12470-5:2003

Clinical thermometers - Part 5: Performance of infra-red ear thermometers (with maximum de...

  EN ISO 12870:2009

Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO 12870:2004)

  EN 13060:2014

Small steam sterilizers

  EN ISO 13408-1:2015

Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:200...

  EN ISO 13408-2:2011

Aseptic processing of health care products - Part 2: Filtration (ISO 13408-2:2003)

  EN ISO 13408-3:2011

Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006)

  EN ISO 13408-4:2011

Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 1340...

  EN ISO 13408-5:2011

Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2...

  EN ISO 13408-6:2011

Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005)

  EN ISO 13408-7:2015

Aseptic processing of health care products - Part 7: Alternative processes for medical dev...

  EN ISO 13485:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 13485:2016/AC:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN 13544-1:2007/A1:2009

Respiratory therapy equipment - Part 1: Nebulizing systems and their components

  EN 13544-2:2002/A1:2009

Respiratory therapy equipment - Part 2: Tubing and connectors

  EN 13544-3:2001/A1:2009

Respiratory therapy equipment - Part 3: Air entrainment devices

  EN 13624:2003

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation o...

  EN 13718-1:2008

Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical d...

  EN 13718-2:2015

Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical ...

  EN 13726-1:2002

Test methods for primary wound dressings - Part 1: Aspects of absorbency

  EN 13726-1:2002/AC:2003

Test methods for primary wound dressings - Part 1: Aspects of absorbency

  EN 13726-2:2002

Test methods for primary wound dressings - Part 2: Moisture vapour transmission rate of pe...

  EN 13727:2012

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation o...

  EN 13867:2002/A1:2009

Concentrates for haemodialysis and related therapies

  EN 13976-1:2011

Rescue systems - Transportation of incubators - Part 1: Interface conditions

  EN 13976-2:2011

Rescue systems - Transportation of incubators - Part 2: System requirements

  EN 14079:2003

Non-active medical devices - Performance requirements and test methods for absorbent cotto...

  EN 14139:2010

Ophthalmic optics - Specifications for ready-to-wear spectacles

  EN ISO 14155:2011

Clinical investigation of medical devices for human subjects - Good clinical practice (ISO...

  EN ISO 14155:2011/AC:2011

Clinical investigation of medical devices for human subjects - Good clinical practice (ISO...

  EN 14180:2003/A2:2009

Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Re...

  EN 14348:2005

Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation o...

  EN ISO 14408:2009

Tracheal tubes designed for laser surgery - Requirements for marking and accompanying info...

  EN 14561:2006

Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of b...

  EN 14562:2006

Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of f...

  EN 14563:2008

Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of m...

  EN ISO 14602:2011

Non-active surgical implants - Implants for osteosynthesis - Particular requirements (ISO ...

  EN ISO 14607:2009

Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2007)

  EN ISO 14630:2009

Non-active surgical implants - General requirements (ISO 14630:2008)

  EN 14683:2005

Surgical masks - Requirements and test methods

  EN ISO 14889:2009

Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses ...

  EN 14931:2006

Pressure vessels for human occupancy (PVHO) - Multi-place pressure chamber systems for hyp...

  EN ISO 14937:2009

Sterilization of health care products - General requirements for characterization of a ste...

  EN ISO 14971:2012

Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corre...

  EN ISO 15001:2011

Anaesthetic and respiratory equipment - Compatibility with oxygen (ISO 15001:2010)

  EN ISO 15002:2008

Flow-metering devices for connection to terminal units of medical gas pipeline systems (IS...

  EN ISO 15004-1:2009

Ophthalmic instruments - Fundamental requirements and test methods - Part 1: General requi...

  EN ISO 15223-1:2016

Medical devices - Symbols to be used with medical device labels, labelling and information...

  EN ISO 15747:2011

Plastic containers for intravenous injections (ISO 15747:2010)

  EN 3-8:2006

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the constructi...

  EN 3-8:2006/AC:2007

Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the constructi...

  EN 19:2016

Industrial valves - Marking of metallic valves

  EN 267:2009/A1:2011

Automatic forced draught burners for liquid fuels

  EN 334:2005/A1:2009

Gas pressure regulators for inlet pressures up to 100 bar

  EN 378-2:2016

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Des...

  EN 593:2009/A1:2011

Industrial valves - Metallic butterfly valves

  EN 676:2003/A2:2008

Automatic forced draught burners for gaseous fuels

  EN 676:2003/A2:2008/AC:2008

Automatic forced draught burners for gaseous fuels

  EN 764-4:2014

Pressure equipment - Part 4: Establishment of technical delivery conditions for metallic m...

  EN 764-5:2014

Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance...

  EN 764-7:2002

Pressure equipment - Part 7: Safety systems for unfired pressure equipment

  EN 764-7:2002/AC:2006

Pressure equipment - Part 7: Safety systems for unfired pressure equipment

  EN 1057:2006/A1:2010

Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and ...

  EN 1092-1:2007/A1:2013

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, P...

  EN 1092-3:2003

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, P...

  EN 1092-3:2003/AC:2007

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, P...

  EN 1092-4:2002

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, P...

  EN 1171:2015

Industrial valves - Cast iron gate valves

  EN 1252-2:2001

Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -8...

  EN 1349:2009

Industrial process control valves

  EN 1515-4:2009

Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to...

  EN 1562:2012

Founding - Malleable cast irons

  EN 1563:2011

Founding - Spheroidal graphite cast irons

  EN 1564:2011

Founding - Ausferritic spheroidal graphite cast irons

  EN 1591-1:2013

Flanges and their joints - Design rules for gasketed circular flange connections - Part 1:...

  EN 1626:2008

Cryogenic vessels - Valves for cryogenic service

  EN 1653:1997

Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot ...

  EN 1653:1997/A1:2000

Copper and copper alloys - Plate, sheet and circles for boilers, pressure vessels and hot ...

  EN 1759-3:2003

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, C...

  EN 1759-3:2003/AC:2004

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, C...

  EN 1759-4:2003

Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, cl...

  EN 1797:2001

Cryogenic vessels - Gas/material compatibility

  EN 1866-2:2014

Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance...

  EN 1866-3:2013

Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressu...

  EN 1983:2013

Industrial valves - Steel ball valves

  EN 1984:2010

Industrial valves - Steel gate valves

  EN ISO 4126-1:2013

Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126...

  EN ISO 4126-3:2006

Safety devices for protection against excessive pressure - Part 3: Safety valves and burst...

  EN ISO 4126-4:2013

Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety v...

  EN ISO 4126-5:2013

Safety devices for protection against excessive pressure - Part 5: Controlled safety press...

  EN ISO 4126-7:2013

Safety devices for protection against excessive pressure - Part 7: Common data (ISO 4126-7...

  EN ISO 9606-1:2017

Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 includ...

  EN ISO 9606-2:2004

Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (I...

  EN ISO 9606-3:1999

Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-...

  EN ISO 9606-4:1999

Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-...

  EN ISO 9606-5:2000

Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirco...

  EN ISO 9712:2012

Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)

  EN 10028-1:2017

Flat products made of steels for pressure purposes - Part 1: General requirements

  EN 10028-2:2017

Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels wi...

  EN 10028-3:2017

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, n...

  EN 10028-4:2017

Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with spec...

  EN 10028-5:2017

Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, t...

  EN 10028-6:2017

Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, q...

  EN 10028-7:2016

Flat products made of steels for pressure purposes - Part 7: Stainless steels

  EN 10204:2004

Metallic products - Types of inspection documents

  EN 10213:2007/A1:2016

Steel castings for pressure purposes

  EN 10216-1:2013

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-a...

  EN 10216-2:2013

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-a...

  EN 10216-3:2013

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy...

  EN 10216-4:2013

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-a...

  EN 10216-5:2013

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stain...

  EN 10217-1:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-all...

  EN 10217-1:2002/A1:2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-all...

  EN 10217-2:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electri...

  EN 10217-2:2002/A1:2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electri...

  EN 10217-3:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy f...

  EN 10217-3:2002/A1:2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy f...

  EN 10217-4:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electri...

  EN 10217-4:2002/A1:2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electri...

  EN 10217-5:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerg...

  EN 10217-5:2002/A1:2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerg...

  EN 10217-6:2002

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerg...

  EN 10217-6:2002/A1:2005

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerg...

  EN 10217-7:2014

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainle...

  EN 10222-1:2017

Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

  EN 10222-2:2017

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specif...

  EN 10222-3:2017

Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperatur...

  EN 10222-4:2017

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof ...

  EN 10222-5:2017

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferr...

  EN 10253-2:2007

Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific ins...

  EN 10253-4:2008

Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) s...

  EN 10253-4:2008/AC:2009

Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) s...

  EN 10269:2013

Steels and nickel alloys for fasteners with specified elevated and/or low temperature prop...

  EN 10272:2016

Stainless steel bars for pressure purposes

  EN 10273:2016

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature p...

  EN 10305-4:2016

Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless ...

  EN 10305-6:2016

Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded co...

  EN ISO 10931:2005

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - S...

  EN ISO 10931:2005/A1:2015

Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - S...

  EN 12178:2016

Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, tes...

  EN 12263:1998

Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure ...

  EN 12266-1:2012

Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures a...

  EN 12284:2003

Refrigerating systems and heat pumps - Valves - Requirements, testing and marking

  EN 12288:2010

Industrial valves - Copper alloy gate valves

  EN 12392:2016

Aluminium and aluminium alloys - Wrought products and cast products - Special requirements...

  EN 12420:2014

Copper and copper alloys - Forgings

  EN 12434:2000

Cryogenic vessels - Cryogenic flexible hoses

  EN 12434:2000/AC:2001

Cryogenic vessels - Cryogenic flexible hoses

  EN 12451:2012

Copper and copper alloys - Seamless, round tubes for heat exchangers

  EN 12452:2012

Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers

  EN 12516-1:2014

Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shel...

  EN 12516-2:2014

Industrial valves - Shell design strength - Part 2: Calculation method for steel valve she...

  EN 12516-3:2002

Valves - Shell design strength - Part 3: Experimental method

  EN 12516-3:2002/AC:2003

Valves - Shell design strength - Part 3: Experimental method

  EN 12516-4:2014

Industrial valves - Shell design strength - Part 4: Calculation method for valve shells ma...

  EN 12542:2010

LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced f...

  EN 12735-1:2016

Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - ...

  EN 12735-2:2016

Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - ...

  EN 12778:2002

Cookware - Pressure cookers for domestic use

  EN 12778:2002/AC:2003

Cookware - Pressure cookers for domestic use

  EN 12778:2002/A1:2005

Cookware - Pressure cookers for domestic use

  EN 12952-1:2015

Water-tube boilers and auxiliary installations - Part 1: General

  EN 12952-2:2011

Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of b...

  EN 12952-3:2011

Water-tube boilers and auxiliary installations - Part 3: Design and calculation for pressu...

  EN 12952-5:2011

Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of p...

  EN 12952-6:2011

Water-tube boilers and auxiliary installations - Part 6: Inspection during construction; d...

  EN 12952-7:2012

Water-tube boilers and auxiliary installations - Part 7: Requirements for equipment for th...

  EN 12952-8:2002

Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems f...

  EN 12952-9:2002

Water-tube boilers and auxiliary installations - Part 9: Requirements for firing systems f...

  EN 12952-10:2002

Water-tube boilers and auxiliary installations - Part 10: Requirements for safeguards agai...

  EN 12952-11:2007

Water-tube boilers and auxiliary installations - Part 11: Requirements for limiting device...

  EN 12952-14:2004

Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-...

  EN 12952-16:2002

Water-tube boilers and auxiliary installations - Part 16: Requirements for grate and fluid...

  EN 12952-18:2012

Water-tube boilers and auxiliary installations - Part 18: Operating instructions

  EN 12953-1:2012

Shell boilers - Part 1: General

  EN 12953-2:2012

Shell boilers - Part 2: Materials for pressure parts of boilers and accessories

  EN 12953-3:2016

Shell boilers - Part 3: Design and calculation for pressure parts

  EN 12953-4:2002

Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler

  EN 12953-5:2002

Shell boilers - Part 5: Inspection during construction, documentation and marking of press...

  EN 12953-6:2011

Shell Boilers - Part 6: Requirements for equipment for the boiler

  EN 12953-7:2002

Shell boilers - Part 7 : Requirements for firing systems for liquid and gaseous fuels for ...

  EN 12953-8:2001

Shell boilers - Part 8: Requirements for safeguards against excessive pressure

  EN 12953-8:2001/AC:2002

Shell boilers - Part 8: Requirements for safeguards against excessive pressure

  EN 12953-9:2007

Shell boilers - Part 9: Requirements for limiting devices of the boiler and accessories

  EN 12953-12:2003

Shell boilers - Part 12: Requirements for grate firing systems for solid fuels for the boi...

  EN 12953-13:2012

Shell boilers - Part 13: Operating instructions

  EN 13121-1:2003

GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditi...

  EN 13121-2:2003

GRP tanks and vessels for use above ground - Part 2: Composite materials - Chemical resist...

  EN 13121-3:2016

GRP tanks and vessels for use above ground - Part 3: Design and workmanship

  EN 13134:2000

Brazing - Procedure approval

  EN 13136:2013

Refrigerating systems and heat pumps - Pressure relief devices and their associated piping...

  EN 13175:2014

LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG...

  EN 13348:2016

Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum

  EN 13371:2001

Cryogenic vessels - Couplings for cryogenic service

  EN 13397:2001

Industrial valves - Diaphragm valves made of metallic materials

  EN 13445-1:2014

Unfired pressure vessels - Part 1: General

  EN 13445-1:2014/A1:2014

Unfired pressure vessels - Part 1: General

  EN 13445-2:2014

Unfired pressure vessels - Part 2: Materials

  EN 13445-2:2014/A1:2016

Unfired pressure vessels - Part 2: Materials

  EN 13445-3:2014

Unfired pressure vessels - Part 3: Design

  EN 13445-3:2014/A1:2015

Unfired pressure vessels - Part 3: Design

  EN 13445-3:2014/A2:2016

Unfired pressure vessels - Part 3: Design

  EN 13445-3:2014/A3:2017

Unfired pressure vessels - Part 3: Design

  EN 13445-4:2014

Unfired pressure vessels - Part 4: Fabrication

  EN 13445-5:2014

Unfired pressure vessels - Part 5: Inspection and testing

  EN 13445-6:2014

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure...

  EN 13445-8:2014

Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of alumini...

  EN 13445-8:2014/A1:2014

Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of alumini...

  EN 13458-1:2002

Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements

  EN 13458-2:2002

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspect...

  EN 13458-2:2002/AC:2006

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspect...

  EN 13480-1:2017

Metallic industrial piping - Part 1: General

  EN 13480-2:2017

Metallic industrial piping - Part 2: Materials

  EN 13480-3:2017

Metallic industrial piping - Part 3: Design and calculation

  EN 13480-4:2012

Metallic industrial piping - Part 4: Fabrication and installation

  EN 556-1:2001

Sterilization of medical devices - Requirements for medical devices to be designated "STER...

  EN 556-1:2001/AC:2006

Sterilization of medical devices - Requirements for medical devices to be designated "STER...

  EN 556-2:2015

Sterilization of medical devices - Requirements for medical devices to be designated ''STE...

  EN 1041:2008

Information supplied by the manufacturer of medical devices

  EN ISO 10993-1:2009

Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk ma...

  EN ISO 10993-1:2009/AC:2010

Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk ma...

  EN ISO 10993-3:2014

Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity...

  EN ISO 10993-4:2009

Biological evaluation of medical devices - Part 4: Selection of tests for interactions wit...

  EN ISO 10993-5:2009

Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10...

  EN ISO 10993-6:2009

Biological evaluation of medical devices - Part 6: Tests for local effects after implantat...

  EN ISO 10993-7:2008

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals ...

  EN ISO 10993-7:2008/AC:2009

Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals ...

  EN ISO 10993-9:2009

Biological evaluation of medical devices - Part 9: Framework for identification and quanti...

  EN ISO 10993-11:2009

Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993...

  EN ISO 10993-12:2012

Biological evaluation of medical devices - Part 12: Sample preparation and reference mater...

  EN ISO 10993-13:2010

Biological evaluation of medical devices - Part 13: Identification and quantification of d...

  EN ISO 10993-16:2010

Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degrada...

  EN ISO 10993-17:2009

Biological evaluation of medical devices - Part 17: Establishment of allowable limits for ...

  EN ISO 10993-18:2009

Biological evaluation of medical devices - Part 18: Chemical characterization of materials...

  EN ISO 11135-1:2007

Sterilization of health care products - Ethylene oxide - Part 1: Requirements for developm...

  EN ISO 11137-1:2015

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11137-2:2015

Sterilization of health care products - Radiation - Part 2: Establishing the sterilization...

  EN ISO 11138-2:2009

Sterilization of health care products - Biological indicators - Part 2: Biological indicat...

  EN ISO 11138-3:2009

Sterilization of health care products - Biological indicators - Part 3: Biological indicat...

  EN ISO 11140-1:2009

Sterilization of health care products - Chemical indicators - Part 1: General requirements...

  EN ISO 11607-1:2009

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, ...

  EN ISO 11737-1:2006

Sterilization of medical devices - Microbiological methods - Part 1: Determination of a po...

  EN ISO 11737-1:2006/AC:2009

Sterilization of medical devices - Microbiological methods - Part 1: Determination of a po...

  EN ISO 11737-2:2009

Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility pe...

  EN ISO 13408-1:2015

Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:200...

  EN ISO 13408-2:2011

Aseptic processing of health care products - Part 2: Filtration (ISO 13408-2:2003)

  EN ISO 13408-3:2011

Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006)

  EN ISO 13408-4:2011

Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 1340...

  EN ISO 13408-5:2011

Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2...

  EN ISO 13408-6:2011

Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005)

  EN ISO 13408-7:2015

Aseptic processing of health care products - Part 7: Alternative processes for medical dev...

  EN ISO 13485:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 13485:2016/AC:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 14155:2011

Clinical investigation of medical devices for human subjects - Good clinical practice (ISO...

  EN ISO 14155:2011/AC:2011

Clinical investigation of medical devices for human subjects - Good clinical practice (ISO...

  EN ISO 14937:2009

Sterilization of health care products - General requirements for characterization of a ste...

  EN ISO 14971:2012

Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corre...

  EN ISO 15223-1:2016

Medical devices - Symbols to be used with medical device labels, labelling and information...

  EN ISO 17665-1:2006

Sterilization of health care products - Moist heat - Part 1: Requirements for the developm...

  EN 45502-1:1997

Active implantable medical devices - Part 1: General requirements for safety, marking and ...

  EN 45502-2-1:2003

Active implantable medical devices - Part 2-1: Particular requirements for active implanta...

  EN 45502-2-2:2008

Active implantable medical devices - Part 2-2: Particular requirements for active implanta...

  EN 45502-2-2:2008/AC:2009

Active implantable medical devices - Part 2-2: Particular requirements for active implanta...

  EN 45502-2-3:2010

Active implantable medical devices - Part 2-3: Particular requirements for cochlear and au...

  EN 60601-1:2006

Medical electrical equipment - Part 1: General requirements for basic safety and essential...

  EN 60601-1:2006/AC:2010

Medical electrical equipment - Part 1: General requirements for basic safety and essential...

  EN 60601-1:2006/A1:2013

Medical electrical equipment - Part 1: General requirements for basic safety and essential...

  EN 60601-1-6:2010

Medical electrical equipment - Part 1-6: General requirements for basic safety and essenti...

  EN 62304:2006

Medical device software - Software life-cycle processesIEC 62304:2006

  EN 62304:2006/AC:2008

Medical device software - Software life-cycle processesIEC 62304:2006

  EN 556-1:2001

Sterilization of medical devices - Requirements for medical devices to be designated "STER...

  EN 556-1:2001/AC:2006

Sterilization of medical devices - Requirements for medical devices to be designated "STER...

  EN 556-2:2015

Sterilization of medical devices - Requirements for medical devices to be designated ''STE...

  EN ISO 11137-1:2015

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11137-2:2015

Sterilization of health care products - Radiation - Part 2: Establishing the sterilization...

  EN ISO 11737-2:2009

Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility pe...

  EN 12322:1999

In vitro diagnostic medical devices - Culture media for microbiology - Performance criteri...

  EN 12322:1999/A1:2001

In vitro diagnostic medical devices - Culture media for microbiology - Performance criteri...

  EN ISO 13408-1:2015

Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:200...

  EN ISO 13408-2:2011

Aseptic processing of health care products - Part 2: Filtration (ISO 13408-2:2003)

  EN ISO 13408-3:2011

Aseptic processing of health care products - Part 3: Lyophilization (ISO 13408-3:2006)

  EN ISO 13408-4:2011

Aseptic processing of health care products - Part 4: Clean-in-place technologies (ISO 1340...

  EN ISO 13408-5:2011

Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2...

  EN ISO 13408-6:2011

Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005)

  EN ISO 13408-7:2015

Aseptic processing of health care products - Part 7: Alternative processes for medical dev...

  EN ISO 13485:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 13485:2016/AC:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN 13532:2002

General requirements for in vitro diagnostic medical devices for self-testing

  EN 13612:2002

Performance evaluation of in vitro diagnostic medical devices

  EN 13612:2002/AC:2002

Performance evaluation of in vitro diagnostic medical devices

  EN 13641:2002

Elimination or reduction of risk of infection related to in vitro diagnostic reagents

  EN 13975:2003

Sampling procedures used for acceptance testing of in vitro diagnostic medical devices - S...

  EN 14136:2004

Use of external quality assessment schemes in the assessment of the performance of in vitr...

  EN 14254:2004

In vitro diagnostic medical devices - Single-use receptacles for the collection of specime...

  EN 14820:2004

Single-use containers for human venous blood specimen collection

  EN ISO 14937:2009

Sterilization of health care products - General requirements for characterization of a ste...

  EN ISO 14971:2012

Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corre...

  EN ISO 15193:2009

In vitro diagnostic medical devices - Measurement of quantities in samples of biological o...

  EN ISO 15194:2009

In vitro diagnostic medical devices - Measurement of quantities in samples of biological o...

  EN ISO 15197:2015

In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for s...

  EN ISO 15223-1:2016

Medical devices - Symbols to be used with medical device labels, labelling and information...

  EN ISO 17511:2003

In vitro diagnostic medical devices - Measurement of quantities in biological samples - Me...

  EN ISO 18113-1:2011

In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling)...

  EN ISO 18113-2:2011

In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling)...

  EN ISO 18113-3:2011

In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling)...

  EN ISO 18113-4:2011

In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling)...

  EN ISO 18113-5:2011

In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling)...

  EN ISO 18153:2003

In vitro diagnostic medical devices - Measurement of quantities in biological samples - Me...

  EN ISO 20776-1:2006

Clinical laboratory testing and in vitro diagnostic test systems - Susceptibility testing ...

  EN ISO 23640:2015

In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reage...

  EN 61010-2-101:2002

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61326-2-6:2006

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part...

  EN 62304:2006

Medical device software - Software life-cycle processesIEC 62304:2006

  EN 62304:2006/AC:2008

Medical device software - Software life-cycle processesIEC 62304:2006

  EN 62366:2008

Medical devices - Application of usability engineering to medical devicesIEC 62366:2007

  EN 1010-1:2004/A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-2:2006/A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1127-1:2011

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and m...

  EN 1127-2:2014

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and m...

  EN 1710:2005/A1:2008

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 1710:2005/A1:2008/AC:2010

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 1755:2015

Industrial Trucks - Safety requirements and verification - Supplementary requirements for ...

  EN 1834-1:2000

Reciprocating internal combustion engines - Safety requirements for design and constructio...

  EN 1834-2:2000

Reciprocating internal combustion engines - Safety requirements for design and constructio...

  EN 1834-3:2000

Reciprocating internal combustion engines - Safety requirements for design and constructio...

  EN 1839:2017

Determination of the explosion limits and the limiting oxygen concentration(LOC) for flamm...

  EN 1953:2013

Atomising and spraying equipment for coating materials - Safety requirements

  EN 12581:2005/A1:2010

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating...

  EN 12621:2006/A1:2010

Machinery for the supply and circulation of coating materials under pressure - Safety requ...

  EN 12757-1:2005/A1:2010

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery fo...

  EN 13012:2012

Petrol filling stations - Construction and performance of automatic nozzles for use on fue...

  EN 13160-1:2003

Leak detection systems - Part 1: General principles

  EN 13237:2012

Potentially explosive atmospheres - Terms and definitions for equipment and protective sys...

  EN 13463-2:2004

Non-electrical equipment for use in potentially explosive atmospheres - Part 2: Protection...

  EN 13463-3:2005

Non-electrical equipment for use in potentially explosive atmospheres - Part 3: Protection...

  EN 13616-1:2016

Overfill prevention devices for static tanks for liquid fuels - Part 1: Overfill preventio...

  EN 13617-1:2012

Petrol filling stations - Part 1: Safety requirements for construction and performance of ...

  EN 13617-2:2012

Petrol filling stations - Part 2: Safety requirements for construction and performance of ...

  EN 13617-3:2012

Petrol filling stations - Part 3: Safety requirements for construction and performance of ...

  EN 13617-4:2012

Petrol filling stations - Part 4: Safety requirements for construction and performance of ...

  EN 13760:2003

Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirement...

  EN 13852-1:2013

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

  EN 14034-1:2004/A1:2011

Determination of explosion characteristics of dust clouds - Part 1: Determination of the m...

  EN 14034-2:2006/A1:2011

Determination of explosion characteristics of dust clouds - Part 2: Determination of the m...

  EN 14034-3:2006/A1:2011

Determination of explosion characteristics of dust clouds - Part 3: Determination of the l...

  EN 14034-4:2004/A1:2011

Determination of explosion characteristics of dust clouds - Part 4: Determination of the l...

  EN 14373:2005

Explosion suppression systems

  EN 14460:2006

Explosion resistant equipment

  EN 14491:2012

Dust explosion venting protective systems

  EN 14492-1:2006/A1:2009

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-1:2006/A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-2:2006/A1:2009

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14492-2:2006/A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14522:2005

Determination of the auto ignition temperature of gases and vapours

  EN 14591-1:2004

Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-...

  EN 14591-1:2004/AC:2006

Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-...

  EN 14591-2:2007

Explosion prevention and protection in underground mines - Protective systems - Part 2: Pa...

  EN 14591-2:2007/AC:2008

Explosion prevention and protection in underground mines - Protective systems - Part 2: Pa...

  EN 14591-4:2007

Explosion prevention and protection in underground mines - Protective systems - Part 4: Au...

  EN 14591-4:2007/AC:2008

Explosion prevention and protection in underground mines - Protective systems - Part 4: Au...

  EN 14677:2008

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liq...

  EN 14678-1:2013

LPG equipment and accessories - Construction and performance of LPG equipment for automoti...

  EN 14681:2006/A1:2010

Safety of machinery - Safety requirements for machinery and equipment for production of st...

  EN 14797:2006

Explosion venting devices

  EN 14973:2015

Conveyor belts for use in underground installations - Electrical and flammability safety r...

  EN 14983:2007

Explosion prevention and protection in underground mines - Equipment and protective system...

  EN 14986:2017

Design of fans working in potentially explosive atmospheres

  EN 14994:2007

Gas explosion venting protective systems

  EN 15089:2009

Explosion isolation systems

  EN 15188:2007

Determination of the spontaneous ignition behaviour of dust accumulations

  EN 15198:2007

Methodology for the risk assessment of non-electrical equipment and components for intende...

  EN 15233:2007

Methodology for functional safety assessment of protective systems for potentially explosi...

  EN 15268:2008

Petrol filling stations - Safety requirements for the construction of submersible pump ass...

  EN 15794:2009

Determination of explosion points of flammable liquids

  EN 15967:2011

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases...

  EN 16009:2011

Flameless explosion venting devices

  EN 16020:2011

Explosion diverters

  EN 16447:2014

Explosion isolation flap valves

  EN ISO 16852:2016

Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:201...

  EN ISO/IEC 80079-20-2:2016

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test metho...

  EN ISO/IEC 80079-20-2:2016/AC:2017

Explosive atmospheres - Part 20-2: Material characteristics - Combustible dusts test metho...

  EN ISO 80079-36:2016

Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basi...

  EN ISO 80079-37:2016

Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-...

  EN 50050-1:2013

Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spray...

  EN 50050-2:2013

Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spray...

  EN 50050-3:2013

Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spray...

  EN 50104:2010

Electrical apparatus for the detection and measurement of oxygen - Performance requirement...

  EN 50176:2009

Stationary electrostatic application equipment for ignitable liquid coating material - Saf...

  EN 50177:2009

Stationary electrostatic application equipment for ignitable coating powders - Safety requ...

  EN 50177:2009/A1:2012

Stationary electrostatic application equipment for ignitable coating powders - Safety requ...

  EN 50223:2015

Stationary electrostatic application equipment for ignitable flock material - Safety requi...

  EN 50271:2010

Electrical apparatus for the detection and measurement of combustible gases, toxic gases o...

  EN 50281-2-1:1998

Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods ...

  EN 50281-2-1:1998/AC:1999

Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods ...

  EN 50303:2000

Group I, Category M1 equipment intended to remain functional in atmospheres endangered by ...

  EN 50381:2004

Transportable ventilated rooms with or without an internal source of release

  EN 50381:2004/AC:2005

Transportable ventilated rooms with or without an internal source of release

  EN 50495:2010

Safety devices required for the safe functioning of equipment with respect to explosion ri...

  EN 60079-0:2012

Explosive atmospheres - Part 0: Equipment - General requirements

  EN 60079-0:2012/A11:2013

Explosive atmospheres - Part 0: Equipment - General requirements

  EN 60079-1:2014

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd'

  EN 60079-2:2014

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p'

  EN 60079-2:2014/AC:2015

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p'

  EN 60079-5:2015

Explosive atmospheres - Part 5: Equipment protection by powder filling 'q'

  EN 60079-6:2015

Explosive atmospheres - Part 6: Equipment protection by liquid immersion 'o'

  EN 60079-7:2015

Explosive atmospheres - Part 7: Equipment protection by increased safety 'e'

  EN 60079-11:2012

Explosive atmospheres - Part 11: Equipment protection by intrinsic safety 'i'

  EN 60079-15:2010

Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'

  EN 60079-18:2015

Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm'

  EN 60079-20-1:2010

Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classificat...

  EN 60079-25:2010

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

  EN 60079-25:2010/AC:2013

Explosive atmospheres - Part 25: Intrinsically safe electrical systems

  EN 60079-26:2015

Explosive atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga

  EN 60079-28:2015

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using op...

  EN 60079-29-1:2016

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors f...

  EN 60079-29-4:2010

Explosive atmospheres - Part 29-4: Gas detectors - Performance requirements of open path d...

  EN 60079-30-1:2007

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testi...

  EN 60079-30-1:2017

Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testi...

  EN 60079-31:2014

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure 't'

  EN 60079-35-1:2011

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - Ge...

  EN 60079-35-1:2011/AC:2011

Explosive atmospheres - Part 35-1: Caplights for use in mines susceptible to firedamp - Ge...

  EN ISO/IEC 80079-34:2011

Explosive atmospheres - Part 34: Application of quality systems for equipment manufacture ...

  EN 26:1997

Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheri...

  EN 26:1997/AC:1998

Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheri...

  EN 26:1997/A1:2000

Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheri...

  EN 26:1997/A3:2006

Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheri...

  EN 26:1997/A2:2004

Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheri...

  EN 30-1-1:2008/A1:2010

Domestic cooking appliances burning gas - Part 1-1: Safety - General

  EN 30-1-2:1999

Domestic cooking appliances burning gas - Part 1-2: Safety - Appliances having forced-conv...

  EN 30-1-3:2003/A1:2006

Domestic cooking appliances burning gas - Part 1-3: Safety - Appliances having a glass cer...

  EN 30-1-4:2002

Domestic cooking appliances burning gas - Part 1-4: Safety - Appliances having one or more...

  EN 30-1-4:2002/A1:2006

Domestic cooking appliances burning gas - Part 1-4: Safety - Appliances having one or more...

  EN 30-2-1:1998

Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General

  EN 30-2-1:1998/A1:2003

Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General

  EN 30-2-1:1998/A2:2005

Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General

  EN 30-2-1:1998/A1:2003/AC:2004

Domestic cooking appliances burning gas - Part 2-1: Rational use of energy - General

  EN 30-2-2:1999

Domestic cooking appliances burning gas - Part 2-2: Rational use of energy - Appliances ha...

  EN 88-1:2007

Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure re...

  EN 88-2:2007

Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure re...

  EN 89:1999

Gas-fired storage water heaters for the production of domestic hot water

  EN 89:1999/A4:2006

Gas-fired storage water heaters for the production of domestic hot water

  EN 89:1999/A3:2006

Gas-fired storage water heaters for the production of domestic hot water

  EN 89:1999/A2:2000

Gas-fired storage water heaters for the production of domestic hot water

  EN 89:1999/A1:1999

Gas-fired storage water heaters for the production of domestic hot water

  EN 125:2010

Flame supervision devices for gas burning appliances - Thermoelectric flame supervision de...

  EN 126:2004

Multifunctional controls for gas burning appliances

  EN 161:2007

Automatic shut-off valves for gas burners and gas appliances

  EN 203-1:2005/A1:2008

Gas heated catering equipment - Part 1: General safety rules

  EN 203-2-1:2005

Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok bur...

  EN 203-2-2:2006

Gas heated catering equipment - Part 2-2: Specific requirements - Ovens

  EN 203-2-3:2005

Gas heated catering equipment - Part 2-3: Specific requirements - Boiling pans

  EN 203-2-4:2005

Gas heated catering equipment - Part 2-4: Specific requirements - Fryers

  EN 203-2-6:2005

Gas heated catering equipment - Part 2-6: Specific requirements - Hot water heaters for be...

  EN 203-2-7:2007

Gas heated catering equipment - Part 2-7: Specific requirements - Salamanders and rotisser...

  EN 203-2-8:2005

Gas heated catering equipment - Part 2-8: Specific requirements - Brat pans and palla cook...

  EN 203-2-9:2005

Gas heated catering equipment - Part 2-9: Specific requirements - Solid tops, warming plat...

  EN 203-2-10:2007

Gas heated catering equipment - Part 2-10: Specific requirements - Chargrills

  EN 203-2-11:2006

Gas heated catering equipment - Part 2-11: Specific requirements - Pasta cookers

  EN 203-3:2009

Gas heated catering equipment - Part 3: Materials and parts in contact with food and other...

  EN 257:2010

Mechanical thermostats for gas-burning appliances

  EN 297:1994

Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric bur...

  EN 297:1994/A3:1996

Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric bur...

  EN 297:1994/A6:2003

Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric bur...

  EN 297:1994/A5:1998

Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric bur...

  EN 297:1994/A4:2004

Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric bur...

  EN 297:1994/A2:1996

Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric bur...

  EN 297:1994/A2:1996/AC:2006

Gas-fired central heating boilers - Type B11 and B11BS boilers fitted with atmospheric bur...

  EN 298:2003

Automatic gas burner control systems for gas burners and gas burning appliances with or wi...

  EN 303-3:1998

Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler...

  EN 303-3:1998/AC:2006

Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler...

  EN 303-3:1998/A2:2004

Heating boilers - Part 3: Gas-fired central heating boilers - Assembly comprising a boiler...

  EN 303-7:2006

Heating boilers - Part 7: Gas-fired central heating boilers equipped with a forced draught...

  EN 377:1993

Lubricants for applications in appliances and associated controls using combustible gases ...

  EN 377:1993/A1:1996

Lubricants for applications in appliances and associated controls using combustible gases ...

  EN 416-1:2009

Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safet...

  EN 416-2:2006

Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 2: Ratio...

  EN 419-1:2009

Non-domestic gas-fired overhead luminous radiant heaters - Part 1: Safety

  EN 419-2:2006

Non-domestic gas-fired overhead luminous radiant heaters - Part 2: Rational use of energy

  EN 437:2003/A1:2009

Test gases - Test pressures - Appliance categories

  EN 449:2002/A1:2007

Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space h...

  EN 461:1999

Specification for dedicated liquefied petroleum gas appliances - Flueless non-domestic spa...

  EN 461:1999/A1:2004

Specification for dedicated liquefied petroleum gas appliances - Flueless non-domestic spa...

  EN 483:1999

Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 ...

  EN 483:1999/A2:2001/AC:2006

Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 ...

  EN 483:1999/A2:2001

Gas-fired central heating boilers - Type C boilers of nominal heat input not exceeding 70 ...

  EN 484:1997

Specification for dedicated liquefied petroleum gas appliances - Independent hotplates, in...

  EN 497:1997

Specification for dedicated liquefied petroleum gas appliances - Multi purpose boiling bur...

  EN 498:1997

Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use

  EN 498:1997/AC:2000

Specification for dedicated liquefied petroleum gas appliances - Barbecues for outdoor use

  EN 509:1999

Decorative fuel-effect gas appliances

  EN 509:1999/A1:2003

Decorative fuel-effect gas appliances

  EN 509:1999/A2:2004

Decorative fuel-effect gas appliances

  EN 521:2006

Specifications for dedicated liquefied petroleum gas appliances - Portable vapour pressure...

  EN 525:2009

Non-domestic direct gas-fired forced convection air heaters for space heating not exceedin...

  EN 549:1994

Rubber materials for seals and diaphragms for gas appliances and gas equipment

  EN 613:2000

Independent gas-fired convection heaters

  EN 613:2000/A1:2003

Independent gas-fired convection heaters

  EN 621:2009

Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net...

  EN 624:2000

Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for i...

  EN 624:2000/A2:2007

Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for i...

  EN 625:1995

Gas-fired central heating boilers - Specific requirements for the domestic hot water opera...

  EN 656:1999

Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW b...

  EN 656:1999/A1:2006

Gas-fired central heating boilers - Type B boilers of nominal heat input exceeding 70 kW b...

  EN 676:2003/A2:2008

Automatic forced draught burners for gaseous fuels

  EN 676:2003/A2:2008/AC:2008

Automatic forced draught burners for gaseous fuels

  EN 677:1998

Gas-fired central heating boilers - Specific requirements for condensing boilers with a no...

  EN 732:1998

Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators

  EN 751-1:1996

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gas...

  EN 751-2:1996

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gas...

  EN 751-3:1996

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gas...

  EN 751-3:1996/AC:1997

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gas...

  EN 777-1:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1:...

  EN 777-2:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2:...

  EN 777-3:2009

Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3:...

  EN 777-4:2009

Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4:...

  EN 778:2009

Domestic gas-fired forced convection air heaters for space heating not exceeding a net hea...

  EN 1020:2009

Non-domestic forced convection gas-fired air heaters for space heating not exceeding a net...

  EN 1106:2010

Manually operated taps for gas burning appliances

  EN 1196:1998

Domestic and non-domestic gas-fired air heaters - Supplementary requirements for condensin...

  EN 1266:2002

Independent gas-fired convection heaters incorporating a fan to assist transportation of c...

  EN 1266:2002/A1:2005

Independent gas-fired convection heaters incorporating a fan to assist transportation of c...

  EN 1319:2009

Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burn...

  EN 1458-1:1999

Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not ...

  EN 1458-2:1999

Domestic direct gas-fired tumble dryers of types B22D and B23D, of nominal heat input not ...

  EN 1596:1998

Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-d...

  EN 1596:1998/A1:2004

Specification for dedicated liquefied petroleum gas appliances - Mobile and portable non-d...

  EN 1643:2000

Valve proving systems for automatic shut-off valves for gas burners and gas appliances

  EN 1854:2010

Pressure sensing devices for gas burners and gas burning appliances

  EN 12067-1:1998

Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic type...

  EN 12067-1:1998/A1:2003

Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic type...

  EN 12067-2:2004

Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic typ...

  EN 12078:1998

Zero governors for gas burners and gas burning appliances

  EN 12244-1:1998

Direct gas-fired washing machines, of nominal heat input not exceeding 20 kW - Part 1: Saf...

  EN 12244-2:1998

Direct gas-fired washing machines of nominal heat input not exceeding 20 kW - Part 2: Rati...

  EN 12309-1:1999

Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a ne...

  EN 12309-2:2000

Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a ne...

  EN 12669:2000

Direct gas-fired hot air blowers for use in greenhouses and supplementary non-domestic spa...

  EN 12752-1:1999

Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 1: Safety

  EN 12752-2:1999

Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW - Part 2: Rationa...

  EN 12864:2001

Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or e...

  EN 12864:2001/A1:2003

Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or e...

  EN 12864:2001/A2:2005

Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or e...

  EN 12864:2001/A3:2009

Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or e...

  EN 13278:2003

Open fronted gas-fired independent space heaters

  EN 13611:2007

Safety and control devices for gas burners and gas burning appliances - General requiremen...

  EN 13785:2005/A1:2008

Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outle...

  EN 13786:2004/A1:2008

Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar...

  EN 13836:2006

Gas fired central heating boilers - Type B boilers of nominal heat input exceeding 300 kW,...

  EN 14438:2006

Gas-fired insets for heating more than one room

  EN 14543:2005/A1:2007

Specification for dedicated liquefied petroleum gas appliances - Parasol patio heaters - F...

  EN 14829:2007

Independent gas-fired flueless space heaters for nominal heat input not exceeding 6 kW

  EN 15033:2006

Room sealed storage water heaters for the production of sanitary hot water using LPG for v...

  EN 15033:2006/AC:2008

Room sealed storage water heaters for the production of sanitary hot water using LPG for v...

  EN 81-20:2014

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-21:2009/A1:2012

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-22:2014

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-28:2003

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-50:2014

Safety rules for the construction and installation of lifts - Examinations and tests - Par...

  EN 81-58:2003

Safety rules for the construction and installation of lifts - Examination and tests - Part...

  EN 81-70:2003

Safety rules for the construction and installations of lifts - Particular applications for...

  EN 81-70:2003/A1:2004

Safety rules for the construction and installations of lifts - Particular applications for...

  EN 81-71:2005/A1:2006

Safety rules for the construction and installation of lifts - Particular applications to p...

  EN 81-72:2015

Safety rules for the construction and installation of lifts - Particular applications for ...

  EN 81-73:2016

Safety rules for the construction and installation of lifts - Particular applications for ...

  EN 81-77:2013

Safety rules for the construction and installations of lifts - Particular applications for...

  EN 12016:2013

Electromagnetic compatibility - Product family standard for lifts, escalators and moving w...

  EN 12385-3:2004/A1:2008

Steel wire ropes - Safety - Part 3: Information for use and maintenance

  EN 12385-5:2002

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

  EN 12385-5:2002/AC:2005

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

  EN 13015:2001/A1:2008

Maintenance for lifts and escalators - Rules for maintenance instructions

  EN 13411-7:2006/A1:2008

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

  EN 1359:1998

Gas meters - Diaphragm gas meters

  EN 1359:1998/A1:2006

Gas meters - Diaphragm gas meters

  EN 1434-1:2007

Heat meters - Part 1: General requirements

  EN 1434-2:2007

Heat meters - Part 2: Constructional requirements

  EN 1434-2:2007/AC:2007

Heat meters - Part 2: Constructional requirements

  EN 1434-4:2007

Heat meters - Part 4: Pattern approval tests

  EN 1434-4:2007/AC:2007

Heat meters - Part 4: Pattern approval tests

  EN 1434-5:2007

Heat meters - Part 5: Initial verification tests

  EN 12261:2002

Gas meters - Turbine gas meters

  EN 12261:2002/AC:2003

Gas meters - Turbine gas meters

  EN 12261:2002/A1:2006

Gas meters - Turbine gas meters

  EN 12405-1:2005/A2:2010

Gas meters - Conversion devices - Part 1: Volume conversion

  EN 12480:2002

Gas meters - Rotary displacement gas meters

  EN 12480:2002/A1:2006

Gas meters - Rotary displacement gas meters

  EN 14154-1:2005/A2:2011

Water meters - Part 1: General requirements

  EN 14154-2:2005/A2:2011

Water meters - Part 2: Installation and conditions of use

  EN 14154-3:2005/A2:2011

Water meters - Part 3: Test methods and equipment

  EN 14236:2007

Ultrasonic domestic gas meters

  EN 50470-1:2006

Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test condi...

  EN 50470-2:2006

Electricity metering equipment (a.c.) - Part 2: Particular requirements - Electromechanica...

  EN 50470-3:2006

Electricity metering equipment (a.c.) - Part 3: Particular requirements - Static meters fo...

  EN 62058-11:2010

Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptanc...

  EN 62058-21:2010

Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requir...

  EN 62058-31:2010

Electricity metering equipment (a.c.) - Acceptance inspection - Part 31: Particular requir...

  EN 62059-32-1:2012

Electricity metering equipment - Dependability - Part 32-1: Durability - Testing of the st...

  EN 45501:2015

Metrological aspects of non-automatic weighing instruments

  EN 132:1998

Respiratory protective devices Definitions of terms and pictograms

  EN 133:2001

Respiratory protective devices Classification

  EN 134:1998

Respiratory protective devices Nomenclature of components

  EN 135:1998

Respiratory protective devices List of equivalent terms

  EN 136:1998

Respiratory protective devices - Full face masks - Requirements, testing, marking

  EN 136:1998/AC:2003

Respiratory protective devices - Full face masks - Requirements, testing, marking

  EN 137:2006

Respiratory protective devices - Self-contained open-circuit compressed air breathing appa...

  EN 138:1994

Respiratory protective devices Fresh air hose breathing apparatus for use with full face ...

  EN 140:1998

Respiratory protective devices - Half masks and quarter masks - Requirements, testing, mar...

  EN 140:1998/AC:1999

Respiratory protective devices - Half masks and quarter masks - Requirements, testing, mar...

  EN 142:2002

Respiratory protective devices - Mouthpiece assemblies - Requirements, testing, marking

  EN 143:2000

Respiratory protective devices - Particle filters - Requirements, testing, marking

  EN 143:2000/A1:2006

Respiratory protective devices - Particle filters - Requirements, testing, marking

  EN 143:2000/AC:2005

Respiratory protective devices - Particle filters - Requirements, testing, marking

  EN 144-1:2000

Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for inse...

  EN 144-1:2000/A1:2003

Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for inse...

  EN 144-1:2000/A2:2005

Respiratory protective devices - Gas cylinder valves - Part 1: Thread connections for inse...

  EN 144-2:1998

Respiratory protective devices - Gas cylinder valves - Part 2: Outlet connections

  EN 144-3:2003

Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for divi...

  EN 144-3:2003/AC:2003

Respiratory protective devices - Gas cylinder valves - Part 3: Outlet connections for divi...

  EN 145:1997

Respiratory protective devices - Self-contained closed-circuit breathing apparatus compres...

  EN 145:1997/A1:2000

Respiratory protective devices - Self-contained closed-circuit breathing apparatus compres...

  EN 148-1:1999

Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connecti...

  EN 148-2:1999

Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection

  EN 148-3:1999

Respiratory protective devices - Threads for facepieces - Part 3: Tread connection M 45 x ...

  EN 149:2001/A1:2009

Respiratory protective devices - Filtering half masks to protect against particles - Requi...

  EN 166:2001

Personal eye-protection - Specifications

  EN 167:2001

Personal eye-protection Optical test methods

  EN 168:2001

Personal eye-protection Non-optical test methods

  EN 169:2002

Personal eye-protection - Filters for welding and related techniques - Transmittance requi...

  EN 170:2002

Personal eye-protection - Ultraviolet filters - Transmittance requirements and recommended...

  EN 171:2002

Personal eye-protection Infrared filters Transmittance requirements and recommended use

  EN 172:1994

Personal eye protection - Sunglare filters for industrial use

  EN 172:1994/A2:2001

Personal eye protection - Sunglare filters for industrial use

  EN 172:1994/A1:2000

Personal eye protection - Sunglare filters for industrial use

  EN 174:2001

Personal eye-protection - Ski goggles for downhill skiing

  EN 175:1997

Personal protection - Equipment for eye and face protection during welding and allied proc...

  EN 207:2017

Personal eye-protection equipment - Filters and eye-protectors against laser radiation (la...

  EN 208:2009

Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (...

  EN 250:2014

Respiratory equipment - Open-circuit self-contained compressed air diving apparatus - Requ...

  EN 269:1994

Respiratory protective devices Powered fresh air hose breathing apparatus incorporating a...

  EN 342:2017

Protective clothing - Ensembles and garments for protection against cold

  EN 343:2003/A1:2007

Protective clothing - Protection against rain

  EN 343:2003/A1:2007/AC:2009

Protective clothing - Protection against rain

  EN 348:1992

Protective clothing Test method: Determination of behaviour of materials on impact of sma...

  EN 352-1:2002

Hearing protectors - General requirements - Part 1: Ear-Muffs

  EN 352-2:2002

Hearing protectors - General requirements - Part 2: Ear-plugs

  EN 352-3:2002

Hearing protectors - General requirements - Part 3: Ear-muffs attached to an industrial sa...

  EN 352-4:2001

Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs

  EN 352-4:2001/A1:2005

Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs

  EN 352-5:2002

Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-...

  EN 352-5:2002/A1:2005

Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-...

  EN 352-6:2002

Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical a...

  EN 352-7:2002

Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs

  EN 352-8:2008

Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muf...

  EN 353-1:2014/A1:2017

Personal fall protection equipment - Guided type fall arresters including an anchor line -...

  EN 353-2:2002

Personal protective equipment against falls from a height - Part 2: Guided type fall arres...

  EN 354:2010

Personal fall protection equipment - Lanyards

  EN 355:2002

Personal protective equipment against falls from a height - Energy absorbers

  EN 358:1999

Personal protective equipment for work positioning and prevention of falls from a height -...

  EN 360:2002

Personal protective equipment against falls from a height - Retractable type fall arrester...

  EN 361:2002

Personal protective equipment against falls from a height - Full body harnesses

  EN 362:2004

Personal protective equipment against falls from a height - Connectors

  EN 363:2008

Personal fall protection equipment Personal fall protection systems

  EN 364:1992

Personal protective equipment against falls from a height Test methods

  EN 365:2004

Personal protective equipment against falls from a height - General requirements for instr...

  EN 365:2004/AC:2006

Personal protective equipment against falls from a height - General requirements for instr...

  EN ISO 374-1:2016

Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology an...

  EN 374-2:2003

Protective gloves against chemicals and micro-organisms Part 2: Determination of resistan...

  EN 374-3:2003

Protective gloves against chemicals and micro-organisms Part 3: Determination of resistan...

  EN 374-4:2013

Protective gloves against chemicals and micro-organisms Part 4: Determination of resistan...

  EN ISO 374-5:2016

Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology an...

  EN 379:2003/A1:2009

Personal eye-protection - Automatic welding filters

  EN 381-1:1993

Protective clothing for users of hand-held chainsaws Part 1: Test rig for testing resista...

  EN 381-2:1995

Protective clothing for users of hand-held chain saws Part 2: Test methods for leg protec...

  EN 381-3:1996

Protective clothing for users of hand-held chain-saws Part 3: Test methods for footwear

  EN 381-4:1999

Protective clothing for users of hand-held chainsaws Part 4: Test methods for chainsaw pr...

  EN 381-5:1995

Protective clothing for users of hand-held chain saws - Part 5: Requirements for leg prote...

  EN 381-7:1999

Protective clothing for users of hand-held chainsaws - Part 7: Requirements for chainsaw p...

  EN 381-8:1997

Protective clothing for users of hand-held chain saws Part 8: Test methods for chain saw ...

  EN 381-9:1997

Protective clothing for users of hand-held chain saws - Part 9: Requirements for chain saw...

  EN 381-10:2002

Protective clothing for users of hand-held chainsaws Part 10: Test method for upper body ...

  EN 381-11:2002

Protective clothing for users of hand-held chainsaws - Part 11: Requirements for upper bod...

  EN 388:2016

Protective gloves against mechanical risks

  EN 397:2012/A1:2012

Industrial safety helmets

  EN 402:2003

Respiratory protective devices - Lung governed demand self-contained open-circuit compress...

  EN 403:2004

Respiratory protective devices for self-rescue - Filtering devices with hood for escape fr...

  EN 404:2005

Respiratory protective devices for self-rescue - Filter self-rescuer from carbon monoxide ...

  EN 405:2001/A1:2009

Respiratory protective devices - Valved filtering half masks to protect against gases or g...

  EN 407:2004

Protective gloves against thermal risks (heat and/or fire)

  EN 420:2003/A1:2009

Protective gloves - General requirements and test methods

  EN 421:2010

Protective gloves against ionizing radiation and radioactive contamination

  EN 443:2008

Helmets for fire fighting in buildings and other structures

  EN 458:2004

Hearing protectors Recommendations for selection, use, care and maintenance Guidance doc...

  EN 464:1994

Protective clothing Protection against liquid and gaseous chemicals, including aerosols a...

  EN 469:2005

Protective clothing for firefighters - Performance requirements for protective clothing fo...

  EN 469:2005/AC:2006

Protective clothing for firefighters - Performance requirements for protective clothing fo...

  EN 469:2005/A1:2006

Protective clothing for firefighters - Performance requirements for protective clothing fo...

  EN 510:1993

Specification for protective clothing for use where there is a risk of entanglement with m...

  EN 511:2006

Protective gloves against cold

  EN 530:2010

Abrasion resistance of protective clothing material Test methods

  EN 564:2014

Mountaineering equipment - Accessory cord - Safety requirements and test methods

  EN 565:2017

Mountaineering equipment - Tape - Safety requirements and test methods

  EN 566:2017

Mountaineering equipment - Slings - Safety requirements and test methods

  EN 567:2013

Mountaineering equipment - Rope clamps - Safety requirements and test methods

  EN 568:2015

Mountaineering equipment - Ice anchors - Safety requirements and test methods

  EN 569:2007

Mountaineering equipment - Pitons - Safety requirements and test methods

  EN 659:2003/A1:2008

Protective gloves for firefighters

  EN 659:2003/A1:2008/AC:2009

Protective gloves for firefighters

  EN 795:2012

Personal fall protection equipment - Anchor devices

  EN 812:2012

Industrial bump caps

  EN 813:2008

Personal fall protection equipment - Sit harnesses

  EN 863:1995

Protective clothing Mechanical properties Test method: Puncture resistance

  EN 892:2012/A1:2016

Mountaineering equipment Dynamic mountaineering ropes Safety requirements and test metho...

  EN 893:2010

Mountaineering equipment Crampons Safety requirements and test methods

  EN 943-1:2015

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liqui...

  EN 943-2:2002

Protective clothing against liquid and gaseous chemicals, including liquid aerosols and so...

  EN 958:2017

Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) ...

  EN 960:2006

Headforms for use in the testing of protective helmets

  EN 966:2012/A1:2012

Helmets for airborne sports

  EN 1073-1:1998

Protective clothing against radioactive contamination Part 1: Requirements and test metho...

  EN 1073-2:2002

Protective clothing against radioactive contamination - Part 2: Requirements and test meth...

  EN 1077:2007

Helmets for alpine skiers and snowboarders

  EN 1078:2012/A1:2012

Helmets for pedal cyclists and for users of skateboards and roller skates

  EN 1080:2013

Impact protection helmets for young children

  EN 1082-1:1996

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand kniv...

  EN 1082-2:2000

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand kniv...

  EN 1082-3:2000

Protective clothing Gloves and arm guards protecting against cuts and stabs by hand knive...

  EN 1146:2005

Respiratory protective devices - Self-contained open-circuit compressed air breathing appa...

  EN 1149-1:2006

Protective clothing Electrostatic properties Part 1: Test method for measurement of surf...

  EN 1149-2:1997

Protective clothing Electrostatic properties Part 2: Test method for measurement of the ...

  EN 1149-3:2004

Protective clothing Electrostatic properties Part 3: Test methods for measurement of cha...

  EN 1149-5:2008

Protective clothing - Electrostatic properties - Part 5: Material performance and design r...

  EN 1150:1999

Protective clothing - Visibility clothing for non-professional use - Test methods and requ...

  EN 1385:2012

Helmets for canoeing and white water sports

  EN 1486:2007

Protective clothing for fire-fighters - Test methods and requirements for reflective cloth...

  EN 1497:2007

Personal fall protection equipment - Rescue harnesses

  EN 1621-1:2012

Motorcyclists' protective clothing against mechanical impact Part 1: Motorcyclists' limb ...

  EN 1621-2:2014

Motorcyclists' protective clothing against mechanical impact Part 2: Motorcyclists' back ...

  EN 1731:2006

Personal eye protection - Mesh eye and face protectors

  EN 1809:2014/A1:2016

Diving equipment Buoyancy compensators Functional and safety requirements, test methods

  EN 1827:1999/A1:2009

Respiratory protective devices - Half masks without inhalation valves and with separable f...

  EN 1868:1997

Personal protective equipment against falls from a height List of equivalent terms

  EN 1891:1998

Personal protective equipment for the prevention of falls from a height - Low stretch kern...

  EN 1938:2010

Personal eye protection - Goggles for motorcycle and moped users

  EN ISO 4869-2:1995

Acoustics Hearing protectors Part 2: Estimation of effective A-weighted sound pressure l...

  EN ISO 4869-3:2007

Acoustics Hearing protectors Part 3: Measurement of insertion loss of ear-muff type prot...

  EN ISO 6529:2001

Protective clothing Protection against chemicals Determination of resistance of protecti...

  EN ISO 6530:2005

Protective clothing Protection against liquid chemicals Test method for resistance of ma...

  EN ISO 6942:2002

Protective clothing Protection against heat and fire Method of test: Evaluation of mater...

  EN ISO 9151:2016

Protective clothing against heat and flame Determination of heat transmission on exposure...

  EN ISO 9185:2007

Protective clothing Assessment of resistance of materials to molten metal splash (ISO 918...

  EN ISO 10256:2003

Head and face protection for use in ice hockey (ISO 10256:2003)

  EN ISO 10819:2013

Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vi...

  EN ISO 10862:2009

Small craft - Quick release system for trapeze harness (ISO 10862:2009)

  EN ISO 11611:2015

Protective clothing for use in welding and allied processes (ISO 11611:2015)

  EN ISO 11612:2015

Protective clothing Clothing to protect against heat and flame Minimum performance requi...

  EN 12021:2014

Respiratory equipment - Compressed gases for breathing apparatus

  EN 12083:1998

Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) ...

  EN 12083:1998/AC:2000

Respiratory protective devices - Filters with breathing hoses, (Non-mask mounted filters) ...

  EN ISO 12127-1:2015

Clothing for protection against heat and flame Determination of contact heat transmission...

  EN ISO 12127-2:2007

Clothing for protection against heat and flame Determination of contact heat transmission...

  EN ISO 9606-1:2017

Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 includ...

  EN 10207:2005

Steels for simple pressure vessels - Technical delivery requirements for plates, strips an...

  EN ISO 15614-1:2004

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-1:2004/A1:2008

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-1:2004/A2:2012

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-2:2005

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-2:2005/AC:2009

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN 71-1:2014

Safety of toys - Part 1: Mechanical and physical properties

  EN 71-2:2011/A1:2014

Safety of toys - Part 2: Flammability

  EN 71-3:2013/A1:2014

Safety of toys - Part 3: Migration of certain elements

  EN 71-4:2013

Safety of toys - Part 4: Experimental sets for chemistry and related activities

  EN 71-5:2015

Safety of toys - Part 5: Chemical toys (sets) other than experimental sets

  EN 71-7:2014

Safety of toys - Part 7: Finger paints - Requirements and test methods

  EN 71-8:2011

Safety of toys - Part 8: Activity toys for domestic use

  EN 71-12:2013

Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances

  EN 71-13:2014

Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games

  EN 71-14:2014

Safety of toys - Part 14: Trampolines for domestic use

  EN 62115:2005

Electric toys - Safety

  EN 62115:2005/A2:2011/AC:2011

Electric toys - Safety

  EN 62115:2005/A11:2012

Electric toys - Safety

  EN 62115:2005/A11:2012/AC:2013

Electric toys - Safety

  EN 62115:2005/A12:2015

Electric toys - Safety

  EN 809:1998/A1:2009

Pumps and pump units for liquids - Common safety requirements

  EN 809:1998/A1:2009/AC:2010

Pumps and pump units for liquids - Common safety requirements

  EN 818-1:1996/A1:2008

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

  EN 818-2:1996/A1:2008

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain ...

  EN 818-3:1999/A1:2008

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain ...

  EN 818-4:1996/A1:2008

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

  EN 818-5:1999/A1:2008

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

  EN 818-6:2000/A1:2008

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for ...

  EN 818-7:2002/A1:2008

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade...

  EN 848-1:2007/A2:2012

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: S...

  EN 848-2:2007/A2:2012

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: S...

  EN 848-3:2012

Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: N...

  EN 859:2007/A2:2012

Safety of woodworking machines - Hand fed surface planing machines

  EN 860:2007/A2:2012

Safety of woodworking machines - One side thickness planing machines

  EN 861:2007/A2:2012

Safety of woodworking machines - Surface planing and thicknessing machines

  EN 869:2006/A1:2009

Safety of machinery - Safety requirements for pressure metal diecasting units

  EN 908:1999/A1:2009

Agricultural and forestry machinery - Reel machines for irrigation - Safety

  EN 909:1998/A1:2009

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation mac...

  EN 930:1997/A2:2009

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring,...

  EN 931:1997/A2:2009

Footwear manufacturing machines - Lasting machines - Safety requirements

  EN 940:2009/A1:2012

Safety of woodworking machines - Combined woodworking machines

  EN 957-6:2010/A1:2014

Stationary training equipment - Part 6: Treadmills, additional specific safety requirement...

  EN 972:1998/A1:2010

Tannery machines - Reciprocating roller machines - Safety requirements

  EN 972:1998/A1:2010/AC:2011

Tannery machines - Reciprocating roller machines - Safety requirements

  EN 1010-1:2004/A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-2:2006/A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-3:2002/A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-4:2004/A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1012-1:2010

Compressors and vacuum pumps - Safety requirements - Part 1: Air compressors

  EN 1012-2:1996/A1:2009

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

  EN 1012-3:2013

Compressors and vacuum pumps - Safety requirements - Part 3: Process compressors

  EN 1028-1:2002/A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification...

  EN 1028-2:2002/A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification o...

  EN 1034-1:2000/A1:2010

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-2:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-3:2011

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-4:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-5:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-6:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-7:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-8:2012

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-13:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-14:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-16:2012

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-17:2012

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-21:2012

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-22:2005/A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-26:2012

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-27:2012

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1114-1:2011

Plastics and rubber machines - Extruders and extrusion lines - Part 1: Safety requirements...

  EN 1114-3:2001/A1:2008

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements...

  EN 1175-1:1998/A1:2010

Safety of industrial trucks - Electrical requirements - Part 1: General requirements for b...

  EN 1175-2:1998/A1:2010

Safety of industrial trucks - Electrical requirements - Part 2: General requirements of in...

  EN 1175-3:1998/A1:2010

Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for ...

  EN 1218-1:1999/A1:2009

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines ...

  EN 1218-2:2004/A1:2009

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or pr...

  EN 1218-3:2001/A1:2009

Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines wi...

  EN 1218-5:2004/A1:2009

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines w...

  EN 1247:2004/A1:2010

Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting...

  EN 1248:2001/A1:2009

Foundry machinery - Safety requirements for abrasive blasting equipment

  EN 1265:1999/A1:2008

Safety of machinery - Noise test code for foundry machines and equipment

  EN 1374:2000/A1:2010

Agricultural machinery - Silos stationary unloaders for round silos - Safety

  EN 1398:2009

Dock levellers - Safety requirements

  EN 1417:2014

Plastics and rubber machines - Two-roll mills - Safety requirements

  EN 1459-1:2017

Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach truck...

  EN 1459-2:2015

Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-rea...

  EN 1492-1:2000/A1:2008

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for ge...

  EN 1492-2:2000/A1:2008

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose ...

  EN 1492-4:2004/A1:2008

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and...

  EN 1493:2010

Vehicle lifts

  EN 1494:2000/A1:2008

Mobile or movable jacks and associated lifting equipment

  EN 1495:1997/A2:2009

Lifting platforms - Mast climbing work platforms

  EN 1495:1997/A2:2009/AC:2010

Lifting platforms - Mast climbing work platforms

  EN 1501-1:2011/A1:2015

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear l...

  EN 1501-2:2005/A1:2009

Refuse collection vehicles and associated lifting devices - General requirements and safet...

  EN 1501-3:2008

Refuse collection vehicles and their associated lifting devices - General requirements and...

  EN 1501-4:2007

Refuse collection vehicles and their associated lifting devices - General requirements and...

  EN 1501-5:2011

Refuse collection vehicles - General requirements and safety requirements - Part 5: Liftin...

  EN 1526:1997/A1:2008

Safety of industrial trucks - Additional requirements for automated functions on trucks

  EN 1539:2015

Dryers and ovens, in which flammable substances are released - Safety requirements

  EN 1547:2001/A1:2009

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing eq...

  EN 1550:1997/A1:2008

Machine-tools safety - Safety requirements for the design and construction of work holding...

  EN 1554:2012

Conveyor belts - Drum friction testing

  EN 1570-1:2011/A1:2014

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed la...

  EN 1570-2:2016

Safety requirements for lifting tables - Part 2: Lifting tables serving more than 2 fixed ...

  EN 1612-1:1997/A1:2008

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements fo...

  EN 1672-2:2005/A1:2009

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

  EN 1673:2000/A1:2009

Food processing machinery - Rotary rack ovens - Safety and hygiene requirements

  EN 1674:2015

Food processing machinery - Dough sheeters - Safety and hygiene requirements

  EN 1677-1:2000/A1:2008

Components for slings - Safety - Part 1: Forged steel components, Grade 8

  EN 1677-2:2000/A1:2008

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

  EN 1677-3:2001/A1:2008

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

  EN 1677-4:2000/A1:2008

Components for slings - Safety - Part 4: Links, Grade 8

  EN 1677-5:2001/A1:2008

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

  EN 1677-6:2001/A1:2008

Components for slings - Safety - Part 6: Links - Grade 4

  EN 1678:1998/A1:2010

Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements

  EN 1679-1:1998/A1:2011

Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

  EN 1710:2005/A1:2008

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 1710:2005/A1:2008/AC:2010

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 1755:2000/A2:2013

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flam...

  EN 1756-1:2001/A1:2008

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part ...

  EN 1756-2:2004/A1:2009

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part ...

  EN 1777:2010

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and ...

  EN 1804-1:2001/A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1804-2:2001/A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1804-3:2006/A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1807-1:2013

Safety of woodworking machines - Band sawing machines - Part 1: Table band saws and band r...

  EN 1807-2:2013

Safety of woodworking machines - Band sawing machines - Part 2: Log sawing machines

  EN 1808:2015

Safety requirements for suspended access equipment - Design calculations, stability criter...

  EN 1829-1:2010

High pressure water jet machines - Safety requirements - Part 1: Machines

  EN 1829-2:2008

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and con...

  EN 1829-2:2008/AC:2011

High-pressure water jet machines - Safety requirements - Part 2: Hoses, hose lines and con...

  EN 1845:2007

Footwear manufacturing machines - Footwear moulding machines - Safety requirements

  EN 1846-2:2009/A1:2013

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and perfor...

  EN 1846-3:2013

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safet...

  EN 1853:1999/A1:2009

Agricultural machinery - Trailers with tipping body - Safety

  EN 1870-3:2001/A1:2009

Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut...

  EN 1870-4:2012

Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing ...

  EN 1870-5:2002/A2:2012

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up...

  EN 1870-6:2002/A1:2009

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machin...

  EN 1870-7:2012

Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawin...

  EN 1870-8:2012

Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging ci...

  EN 1870-9:2012

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular ...

  EN 1870-10:2013

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automati...

  EN 1870-11:2013

Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizo...

  EN 1870-12:2013

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sa...

  EN 1870-13:2007/A2:2012

Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel...

  EN 1870-14:2007/A2:2012

Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing...

  EN 1870-15:2012

Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut...

  EN 1870-16:2012

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing m...

  EN 1870-17:2012/A1:2015

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cut...

  EN 1870-19:2013

Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches ...

  EN 1889-1:2011

Machines for underground mines - Mobile machines working underground - Safety - Part 1: Ru...

  EN 1889-2:2003/A1:2009

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Ra...

  EN 1915-1:2013

Aircraft ground support equipment - General requirements - Part 1: Basic safety requiremen...

  EN 1915-2:2001/A1:2009

Aircraft ground support equipment - General requirements - Part 2: Stability and strength ...

  EN 1915-3:2004/A1:2009

Aircraft ground support equipment - General requirements - Part 3: Vibration measurement m...

  EN 1915-4:2004/A1:2009

Aircraft ground support equipment - General requirements - Part 4: Noise measurement metho...

  EN 1953:2013

Atomising and spraying equipment for coating materials - Safety requirements

  EN 1974:1998/A1:2009

Food processing machinery - Slicing machines - Safety and hygiene requirements

  EN ISO 2151:2008

Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2...

  EN ISO 2860:2008

Earth-moving machinery - Minimum access dimensions (ISO 2860:1992)

  EN ISO 2867:2011

Earth-moving machinery - Access systems (ISO 2867:2011)

  EN ISO 3164:2013

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications ...

  EN ISO 3266:2010

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

  EN ISO 3266:2010/A1:2015

Forged steel eyebolts grade 4 for general lifting purposes (ISO 3266:2010)

  EN ISO 3411:2007

Earth-moving machinery - Physical dimensions of operators and minimum operator space envel...

  EN ISO 3449:2008

Earth-moving machinery - Falling-object protective structures - Laboratory tests and perfo...

  EN ISO 3450:2011

Earth-moving machinery - Wheeled or high-speed rubber-tracked machines - Performance requi...

  EN ISO 3457:2008

Earth-moving machinery - Guards - Definitions and requirements (ISO 3457:2003)

  EN ISO 3471:2008

Earth-moving machinery - Roll-over protective structures - Laboratory tests and performanc...

  EN ISO 3691-1:2015

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industri...

  EN ISO 3691-1:2015/AC:2016

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industri...

  EN ISO 3691-5:2014

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled tr...

  EN ISO 3691-5:2014/AC:2014

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled tr...

  EN ISO 3691-6:2015

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel ca...

  EN ISO 3691-6:2015/AC:2016

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel ca...

  EN ISO 4254-1:2015

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

  EN ISO 4254-5:2009

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2...

  EN ISO 4254-5:2009/AC:2011

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2...

  EN ISO 4254-6:2009

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO...

  EN ISO 4254-6:2009/AC:2010

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO...

  EN ISO 4254-7:2009

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton...

  EN ISO 4254-7:2009/AC:2010

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters and cotton...

  EN ISO 4254-10:2009

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

  EN ISO 4254-10:2009/AC:2010

Agricultural machinery - Safety - Part 10: Rotary tedders and rakes (ISO 4254-10:2009)

  EN ISO 4254-11:2010

Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)

  EN ISO 4254-12:2012

Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (I...

  EN ISO 4254-12:2012/A1:2017

Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers (I...

  EN ISO 4254-14:2016

Agricultural machinery - Safety - Part 14: Bale wrappers (ISO 4254-14:2016)

  EN ISO 5395-1:2013

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: ...

  EN ISO 5395-2:2013

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: ...

  EN ISO 5395-2:2013/A1:2016

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: ...

  EN ISO 5395-2:2013/A2:2017

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 2: ...

  EN ISO 5395-3:2013

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: ...

  EN ISO 5395-3:2013/A1:2017

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: ...

  EN ISO 5674:2009

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) driv...

  EN ISO 6682:2008

Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including...

  EN ISO 6683:2008

Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements an...

  EN ISO 7096:2008

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

  EN ISO 7096:2008/AC:2009

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2000)

  EN ISO 8230-1:2008

Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 82...

  EN ISO 8230-2:2008

Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (...

  EN ISO 8230-3:2008

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvent...

  EN ISO 8528-13:2016

Reciprocating internal combustion engine driven alternating current generating sets - Part...

  EN ISO 9902-1:2001

Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

  EN ISO 9902-1:2001/A1:2009

Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

  EN ISO 9902-1:2001/A2:2014

Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

  EN ISO 9902-2:2001

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery ...

  EN ISO 9902-2:2001/A1:2009

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery ...

  EN ISO 9902-2:2001/A2:2014

Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery ...

  EN ISO 9902-3:2001

Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

  EN ISO 9902-3:2001/A1:2009

Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

  EN ISO 9902-3:2001/A2:2014

Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

  EN ISO 9902-4:2001

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufactur...

  EN ISO 9902-4:2001/A1:2009

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufactur...

  EN ISO 9902-4:2001/A2:2014

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufactur...

  EN ISO 9902-5:2001

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (...

  EN ISO 9902-5:2001/A1:2009

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (...

  EN ISO 9902-5:2001/A2:2014

Textile machinery - Noise test code - Part 5: Weaving and knitting preparatory machinery (...

  EN ISO 9902-6:2001

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2...

  EN ISO 9902-6:2001/A1:2009

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2...

  EN ISO 9902-6:2001/A2:2014

Textile machinery - Noise test code - Part 6: Fabric manufacturing machinery (ISO 9902-6:2...

  EN ISO 9902-7:2001

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2...

  EN ISO 9902-7:2001/A1:2009

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2...

  EN ISO 9902-7:2001/A2:2014

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2...

  EN ISO 10218-1:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (I...

  EN ISO 10218-2:2011

Robots and robotic devices - Safety requirements for industrial robots - Part 2: Robot sys...

  EN ISO 10472-1:2008

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10...

  EN ISO 10472-2:2008

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer...

  EN ISO 10472-3:2008

Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines includ...

  EN ISO 10472-4:2008

Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:199...

  EN ISO 10472-5:2008

Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders a...

  EN ISO 10472-6:2008

Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses ...

  EN ISO 10517:2009

Powered hand-held hedge trimmers - Safety (ISO 10517:2009)

  EN ISO 10517:2009/A1:2013

Powered hand-held hedge trimmers - Safety (ISO 10517:2009)

  EN ISO 10821:2005

Industrial sewing machines - Safety requirements for sewing machines, units and systems (I...

  EN ISO 10821:2005/A1:2009

Industrial sewing machines - Safety requirements for sewing machines, units and systems (I...

  EN ISO 11102-1:2009

Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety req...

  EN ISO 11102-2:2009

Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of ...

  EN ISO 11111-1:2016

Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016)

  EN ISO 11111-2:2005

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machin...

  EN ISO 11111-2:2005/A1:2009

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machin...

  EN ISO 11111-2:2005/A2:2016

Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machin...

  EN ISO 11111-3:2005

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

  EN ISO 11111-3:2005/A1:2009

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

  EN ISO 11111-3:2005/A2:2016

Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005)

  EN ISO 11111-4:2005

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufa...

  EN ISO 11111-4:2005/A1:2009

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufa...

  EN ISO 11111-4:2005/A2:2016

Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufa...

  EN ISO 11111-5:2005

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and kni...

  EN ISO 11111-5:2005/A1:2009

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and kni...

  EN ISO 11111-5:2005/A2:2016

Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and kni...

  EN ISO 11111-6:2005

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 1111...

  EN ISO 11111-6:2005/A1:2009

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 1111...

  EN ISO 11111-6:2005/A2:2016

Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 1111...

  EN ISO 11111-7:2005

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 1111...

  EN ISO 11111-7:2005/A1:2009

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 1111...

  EN ISO 11111-7:2005/A2:2016

Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 1111...

  EN ISO 11145:2016

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11...

  EN ISO 11148-1:2011

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools fo...

  EN ISO 11148-2:2011

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimpin...

  EN ISO 11148-3:2012

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO...

  EN ISO 11148-4:2012

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive p...

  EN ISO 11148-5:2011

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drill...

  EN ISO 11148-6:2012

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools fo...

  EN ISO 11148-7:2012

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2...

  EN ISO 11148-8:2011

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (...

  EN ISO 11148-9:2011

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148...

  EN ISO 11148-10:2011

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tool...

  EN ISO 11148-11:2011

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (I...

  EN ISO 11148-12:2012

Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating ...

  EN ISO 11252:2013

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation...

  EN ISO 11553-1:2008

Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO...

  EN ISO 11553-2:2008

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-hel...

  EN ISO 11553-3:2013

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measur...

  EN ISO 11554:2017

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam po...

  EN ISO 11680-1:2011

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners ...

  EN ISO 11680-2:2011

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners ...

  EN ISO 11681-1:2011

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chai...

  EN ISO 11681-2:2011

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chai...

  EN ISO 11681-2:2011/A1:2017

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chai...

  EN ISO 11806-1:2011

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-h...

  EN ISO 11806-2:2011

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-h...

  EN ISO 11850:2011

Machinery for forestry - General safety requirements (ISO 11850:2011)

  EN ISO 11850:2011/A1:2016

Machinery for forestry - General safety requirements (ISO 11850:2011)

  EN 12001:2012

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

  EN 12012-1:2007/A1:2008

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for b...

  EN 12012-3:2001/A1:2008

Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for s...

  EN 12012-4:2006/A1:2008

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for a...

  EN 12013:2000/A1:2008

Plastics and rubber machines - Internal mixers - Safety requirements

  EN 12016:2013

Electromagnetic compatibility - Product family standard for lifts, escalators and moving w...

  EN 12041:2014

Food processing machinery - Moulders - Safety and hygiene requirements

  EN 12042:2014

Food processing machinery - Automatic dough dividers - Safety and hygiene requirements

  EN 12043:2014

Food processing machinery - Intermediate provers - Safety and hygiene requirements

  EN 12044:2005/A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punchin...

  EN 12053:2001/A1:2008

Safety of industrial trucks - Test methods for measuring noise emissions

  EN 12077-2:1998/A1:2008

Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devic...

  EN 12110:2014

Tunnelling machines - Air locks - Safety requirements

  EN 12111:2014

Tunnelling machines - Road headers and continuous miners - Safety requirements

  EN 12158-1:2000/A1:2010

Builders' hoists for goods - Part 1: Hoists with accessible platforms

  EN 12158-2:2000/A1:2010

Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying dev...

  EN 12159:2012

Builders hoists for persons and materials with vertically guided cages

  EN 12162:2001/A1:2009

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

  EN 12203:2003/A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather pr...

  EN 12267:2003/A1:2010

Food processing machinery - Circular saw machines - Safety and hygiene requirements

  EN 12268:2014

Food processing machinery - Band saw machines - Safety and hygiene requirements

  EN 12301:2000/A1:2008

Plastics and rubber machines - Calenders - Safety requirements

  EN 12312-1:2013

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs

  EN 12312-2:2014

Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles

  EN 12312-3:2017

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

  EN 12312-4:2014

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bri...

  EN 12312-5:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equi...

  EN 12312-6:2017

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and de-icing/a...

  EN 12312-7:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equ...

  EN 12312-8:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and...

  EN 12312-9:2013

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loade...

  EN 12312-10:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet tran...

  EN 12312-12:2017

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service...

  EN 12312-13:2017

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equi...

  EN 12312-14:2014

Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitate...

  EN 12312-15:2006/A1:2009

Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment...

  EN 12312-16:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment

  EN 12312-17:2004/A1:2009

Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equi...

  EN 12312-18:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen un...

  EN 12312-19:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle ...

  EN 12312-20:2005/A1:2009

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground pow...

  EN 12321:2003/A1:2009

Underground mining machinery - Specification for the safety requirements of armoured face ...

  EN 12331:2003/A2:2010

Food processing machinery - Mincing machines - Safety and hygiene requirements

  EN 12348:2000/A1:2009

Core drilling machines on stand - Safety

  EN 12355:2003/A1:2010

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety a...

  EN 12385-1:2002/A1:2008

Steel wire ropes - Safety - Part 1: General requirements

  EN 12385-2:2002/A1:2008

Steel wire ropes - Safety - Part 2: Definitions, designation and classification

  EN 12385-3:2004/A1:2008

Steel wire ropes - Safety - Part 3: Information for use and maintenance

  EN 12385-4:2002/A1:2008

Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

  EN 12385-10:2003/A1:2008

Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications

  EN 12387:2005/A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair...

  EN 12409:2008/A1:2011

Plastics and rubber machines - Thermoforming machines - Safety requirements

  EN 12417:2001/A2:2009

Machine tools - Safety - Machining centres

  EN 12417:2001/A2:2009/AC:2010

Machine tools - Safety - Machining centres

  EN 12418:2000/A1:2009

Masonry and stone cutting-off machines for job site - Safety

  EN 12463:2004/A1:2011

Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene r...

  EN 12505:2000/A1:2009

Food processing machinery - Centrifugal machines for processing edible oils and fats - Saf...

  EN 12525:2000/A2:2010

Agricultural machinery - Front loaders - Safety

  EN 12545:2000/A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - C...

  EN 12547:2014

Centrifuges - Common safety requirements

  EN 12549:1999/A1:2008

Acoustics - Noise test code for fastener driving tools - Engineering method

  EN 12581:2005/A1:2010

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating...

  EN 12621:2006/A1:2010

Machinery for the supply and circulation of coating materials under pressure - Safety requ...

  EN 12622:2009/A1:2013

Safety of machine tools - Hydraulic press brakes

  EN 12629-1:2000/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-2:2002/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-3:2002/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-4:2001/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-1:2003/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-2:2003/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-3:2003/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-4:2003/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-6:2004/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-7:2004/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-8:2002/A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12635:2002/A1:2008

Industrial, commercial and garage doors and gates - Installation and use

  EN 12643:2014

Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modi...

  EN 12644-1:2001/A1:2008

Cranes - Information for use and testing - Part 1: Instructions

  EN 12644-2:2000/A1:2008

Cranes - Information for use and testing - Part 2: Marking

  EN 12649:2008/A1:2011

Concrete compactors and smoothing machines - Safety

  EN 12653:1999/A2:2009

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety...

  EN 12693:2008

Refrigerating systems and heat pumps - Safety and environmental requirements - Positive di...

  EN 12717:2001/A1:2009

Safety of machine tools - Drilling machines

  EN 12733:2001/A1:2009

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

  EN 12750:2013

Safety of woodworking machines - Four sided moulding machines

  EN 12753:2005/A1:2010

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety require...

  EN 12757-1:2005/A1:2010

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery fo...

  EN 12779:2015

Safety of woodworking machines - Chip and dust extraction systems with fixed installation ...

  EN 12852:2001/A1:2010

Food processing machinery - Food processors and blenders - Safety and hygiene requirements

  EN 12853:2001/A1:2010

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirement...

  EN 12853:2001/A1:2010/AC:2010

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirement...

  EN 12854:2003/A1:2010

Food processing machinery - Beam mixers - Safety and hygiene requirements

  EN 12855:2003/A1:2010

Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

  EN 12881-1:2014

Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

  EN 12881-2:2005/A1:2008

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

  EN 12882:2015

Conveyor belts for general purpose use - Electrical and flammability safety requirements

  EN 12921-1:2005/A1:2010

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapou...

  EN 12921-2:2005/A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapou...

  EN 12921-3:2005/A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapou...

  EN 12921-4:2005/A1:2008

Machines for surface cleaning and pretreatment of industrial items using liquids and vapou...

  EN 12965:2003/A2:2009

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts an...

  EN 12978:2003/A1:2009

Industrial, commercial and garage doors and gates - Safety devices for power operated door...

  EN 12981:2005/A1:2009

Coating plants - Spray booths for application of organic powder coating material - Safety ...

  EN 12984:2005/A1:2010

Food processing machinery - Portable and/or hand-guided machines and appliances with mecha...

  EN 12999:2011/A1:2012

Cranes - Loader cranes

  EN 13000:2010/A1:2014

Cranes - Mobile cranes

  EN 13001-1:2015

Cranes - General design - Part 1: General principles and requirements

  EN 13001-2:2014

Crane safety - General design - Part 2: Load actions

  EN 13001-3-1:2012/A1:2013

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

  EN 13001-3-2:2014

Cranes - General design - Part 3-2: Limit states and proof of competence of wire ropes in ...

  EN 13001-3-3:2014

Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail con...

  EN 13001-3-5:2016

Cranes - General design - Part 3-5: Limit states and proof of competence of forged hooks

  EN 13015:2001/A1:2008

Maintenance for lifts and escalators - Rules for maintenance instructions

  EN 13019:2001/A1:2008

Machines for road surface cleaning - Safety requirements

  EN 13020:2015

Road surface treatment machines - Safety requirements

  EN 13021:2003/A1:2008

Winter service machines - Safety requirements

  EN 13023:2003/A1:2010

Noise measurement methods for printing, paper converting, paper making machines and auxili...

  EN 13035-1:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-2:2008

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-3:2003/A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-3:2003/A1:2009/AC:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-4:2003/A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-5:2006/A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-6:2006/A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-7:2006/A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-9:2006/A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-11:2006/A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13042-1:2007/A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13042-2:2004/A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13042-3:2007/A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13042-5:2003/A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13059:2002/A1:2008

Safety of industrial trucks - Test methods for measuring vibration

  EN 13102:2005/A1:2008

Ceramic machines - Safety - Loading and unloading of fine clay tiles

  EN 13112:2002/A1:2009

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

  EN 13113:2002/A1:2010

Tannery machines - Roller coating machines - Safety requirements

  EN 13114:2002/A1:2009

Tannery machines - Rotating process vessels - Safety requirements

  EN 13118:2000/A1:2009

Agricultural machinery - Potato harvesting equipment - Safety

  EN 13120:2009/A1:2014

Internal blinds - Performance requirements including safety

  EN 13120:2009/A1:2014/AC:2015

Internal blinds - Performance requirements including safety

  EN 13128:2001/A2:2009

Safety of machine tools - Milling machines (including boring machines)

  EN 13128:2001/A2:2009/AC:2010

Safety of machine tools - Milling machines (including boring machines)

  EN 13135:2013

Cranes - Safety - Design - Requirements for equipment

  EN 13140:2000/A1:2009

Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety

  EN 13155:2003/A2:2009

Cranes - Safety - Non-fixed load lifting attachments

  EN 13157:2004/A1:2009

Cranes - Safety - Hand powered cranes

  EN 13204:2016

Double acting hydraulic rescue tools for fire and rescue service use - Safety and performa...

  EN 13208:2003/A1:2010

Food processing machinery - Vegetable peelers - Safety and hygiene requirements

  EN 13241:2003/A2:2016

Industrial, commercial, garage doors and gates - Product standard, performance characteris...

  EN 13288:2005/A1:2009

Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene require...

  EN 13289:2001/A1:2013

Pasta processing plants - Dryers and coolers - Safety and hygiene requirements

  EN 13355:2004/A1:2009

Coating plants - Combined booths - Safety requirements

  EN 13367:2005/A1:2008

Ceramic machines - Safety - Transfer platforms and cars

  EN 13367:2005/A1:2008/AC:2009

Ceramic machines - Safety - Transfer platforms and cars

  EN 13378:2001/A1:2013

Pasta processing plants - Pasta presses - Safety and hygiene requirements

  EN 13379:2001/A1:2013

Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, ...

  EN 13389:2005/A1:2009

Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirement...

  EN 13390:2002/A1:2009

Food processing machinery - Pie and tart machines - Safety and hygiene requirements

  EN 13411-1:2002/A1:2008

Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings

  EN 13411-2:2001/A1:2008

Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings

  EN 13411-3:2004/A1:2008

Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing

  EN 13411-4:2011

Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing

  EN 13411-5:2003/A1:2008

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

  EN 13411-6:2004/A1:2008

Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket

  EN 13411-7:2006/A1:2008

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

  EN 13411-8:2011

Terminations for steel wire ropes - Safety - Part 8: Swage terminals and swaging

  EN 13414-1:2003/A2:2008

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

  EN 13414-2:2003/A2:2008

Steel wire rope slings - Safety - Part 2: Specification for information for use and mainte...

  EN 13414-3:2003/A1:2008

Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings

  EN 13418:2013

Plastics and rubber machines - Winding machines for film or sheet - Safety requirements

  EN 13448:2001/A1:2009

Agricultural and forestry machinery - Inter-row mowing units - Safety

  EN 13457:2004/A1:2010

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving,...

  EN ISO 13482:2014

Robots and robotic devices - Safety requirements for personal care robots (ISO 13482:2014)

  EN 13524:2003/A2:2014

Highway maintenance machines - Safety requirements

  EN 13531:2001/A1:2008

Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Lab...

  EN 13534:2006/A1:2010

Food processing machinery - Curing injection machines - Safety and hygiene requirements

  EN 13557:2003/A2:2008

Cranes - Controls and control stations

  EN 13561:2015

External blinds and awnings - Performance requirements including safety

  EN 13561:2015/AC:2016

External blinds and awnings - Performance requirements including safety

  EN 13570:2005/A1:2010

Food processing machinery - Mixing machines - Safety and hygiene requirements

  EN 13586:2004/A1:2008

Cranes - Access

  EN 13591:2005/A1:2009

Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements

  EN 13617-1:2012

Petrol filling stations - Part 1: Safety requirements for construction and performance of ...

  EN 13621:2004/A1:2010

Food processing machinery - Salad dryers - Safety and hygiene requirements

  EN 13659:2015

Shutters and external venetian blinds - Performance requirements including safety

  EN 13675:2004/A1:2010

Safety of machinery - Safety requirements for tube forming and rolling mills and their fin...

  EN 13683:2003/A2:2011

Garden equipment - Integrally powered shredders/chippers - Safety

  EN 13683:2003/A2:2011/AC:2013

Garden equipment - Integrally powered shredders/chippers - Safety

  EN 13684:2004/A3:2009

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

  EN 13731:2007

Lifting bag systems for fire and rescue service use - Safety and performance requirements

  EN 13732:2013

Food processing machinery - Bulk milk coolers on farms - Requirements for performance, saf...

  EN 13736:2003/A1:2009

Safety of machine tools - Pneumatic presses

  EN 13852-1:2013

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

  EN 13862:2001/A1:2009

Floor cutting-off machines - Safety

  EN 13870:2015

Food processing machinery - Portion cutting machines - Safety and hygiene requirements

  EN 13871:2014

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

  EN 13885:2005/A1:2010

Food processing machinery - Clipping machines - Safety and hygiene requirements

  EN 13886:2005/A1:2010

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - S...

  EN 13889:2003/A1:2008

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade...

  EN 13951:2012

Liquid pumps - Safety requirements - Agrifoodstuffs equipment; Design rules to ensure hygi...

  EN 13954:2005/A1:2010

Food processing machinery - Bread slicers - Safety and hygiene requirements

  EN 13977:2011

Railway applications - Track - Safety requirements for portable machines and trolleys for ...

  EN 13985:2003/A1:2009

Machine tools - Safety - Guillotine shears

  EN 14010:2003/A1:2009

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EM...

  EN 14017:2005/A2:2009

Agricultural and forestry machinery - Solid fertilizer distributors - Safety

  EN 14018:2005/A1:2009

Agricultural and forestry machinery - Seed drills - Safety

  EN 14033-3:2017

Railway applications - Track - Railbound construction and maintenance machines - Part 3: G...

  EN 14043:2014

High rise aerial appliances for fire and rescue service use - Turntable ladders with combi...

  EN 14044:2014

High rise aerial appliances for fire and rescue service use - Turntable ladders with seque...

  EN 14070:2003/A1:2009

Safety of machine tools - Transfer and special-purpose machines

  EN 14070:2003/A1:2009/AC:2010

Safety of machine tools - Transfer and special-purpose machines

  EN 14238:2004/A1:2009

Cranes - Manually controlled load manipulating devices

  EN ISO 14314:2009

Reciprocal internal combustion engines - Recoil starting equipment - General safety requir...

  EN 14439:2006/A2:2009

Cranes - Safety - Tower cranes

  EN 14462:2005/A1:2009

Surface treatment equipment - Noise test code for surface treatment equipment including it...

  EN 14466:2005/A1:2008

Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests

  EN 14492-1:2006/A1:2009

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-1:2006/A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-2:2006/A1:2009

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14492-2:2006/A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14502-2:2005/A1:2008

Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations

  EN 14655:2005/A1:2010

Food processing machinery - Baguette slicers - Safety and hygiene requirements

  EN 14656:2006/A1:2010

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous ...

  EN 14658:2005/A1:2010

Continuous handling equipment and systems - General safety requirements for continuous han...

  EN 14673:2006/A1:2010

Safety of machinery - Safety requirements for hydraulically powered open die hot forging p...

  EN 14677:2008

Safety of machinery - Secondary steelmaking - Machinery and equipment for treatment of liq...

  EN 14681:2006/A1:2010

Safety of machinery - Safety requirements for machinery and equipment for production of st...

  EN 14710-1:2005/A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classificat...

  EN 14710-2:2005/A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verificatio...

  EN 14753:2007

Safety of machinery - Safety requirements for machinery and equipment for continuous casti...

  EN 14886:2008

Plastics and rubber machines - Bandknife cutting machines for block foams - Safety require...

  EN 14910:2007/A1:2009

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

  EN 14930:2007/A1:2009

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and ha...

  EN 14957:2006/A1:2010

Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requir...

  EN 14958:2006/A1:2009

Food processing machinery - Machinery for grinding and processing flour and semolina - Saf...

  EN 14973:2015

Conveyor belts for use in underground installations - Electrical and flammability safety r...

  EN ISO 14982:2009

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acc...

  EN 14985:2012

Cranes - Slewing jib cranes

  EN 15000:2008

Safety of industrial trucks - Self propelled variable reach trucks - Specification, perfor...

  EN 15011:2011/A1:2014

Cranes - Bridge and gantry cranes

  EN ISO 15012-4:2016

Health and safety in welding and allied processes - Equipment for capture and separation o...

  EN 15027:2007/A1:2009

Transportable wall saw and wire saw equipment for job site - Safety

  EN 15056:2006/A1:2009

Cranes - Requirements for container handling spreaders

  EN 15059:2009/A1:2015

Snow grooming equipment - Safety requirements

  EN 15061:2007/A1:2008

Safety of machinery - Safety requirements for strip processing line machinery and equipmen...

  EN 15067:2007

Plastics and rubber machines - Film converting machines for bags and sacks - Safety requir...

  EN 15093:2008

Safety of Machinery - Safety requirements for hot flat rolling mills

  EN 15094:2008

Safety of Machinery - Safety requirements for cold flat rolling mills

  EN 15095:2007/A1:2008

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requireme...

  EN 15162:2008

Machines and plants for mining and tooling of natural stone - Safety requirements for gang...

  EN 15163:2008

Machines and installations for the exploitation and processing of natural stone - Safety -...

  EN 15164:2008

Machines and plants for mining and tooling of natural stone - Safety - Requirements for ch...

  EN 15166:2008

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safe...

  EN 15268:2008

Petrol filling stations - Safety requirements for the construction of submersible pump ass...

  EN 15503:2009/A2:2015

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

  EN 15572:2015

Machines and plants for mining and tooling of natural stone - Safety - Requirements for ed...

  EN 15695-1:2017

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) ag...

  EN 15695-2:2017

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) ag...

  EN 15700:2011

Safety for conveyor belts for winter sport or leisure use

  EN ISO 15744:2008

Hand-held non-electric power tools - Noise measurement code - Engineering method (grade 2)...

  EN 15746-2:2010/A1:2011

Railway applications - Track - Road-rail machines and associated equipment - Part 2: Gener...

  EN 15774:2010

Food processing machinery - Machines for processing fresh and filled pasta (tagliatelle, c...

  EN 15811:2014

Agricultural machinery - Fixed guards and interlocked guards with or without guard locking...

  EN 15830:2012

Rough-terrain variable reach trucks - Visibility - Test methods and verification

  EN 15861:2012

Food processing machinery - Smokehouses - Safety and hygiene requirements

  EN 15895:2011

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

  EN 15949:2012

Safety of machinery - Safety requirements for bar mills, structural steel mills and wire r...

  EN 15954-2:2013

Railway applications - Track - Trailers and associated equipment - Part 2: General safety ...

  EN 15955-2:2013

Railway applications - Track - Demountable machines and associated equipment - Part 2: Gen...

  EN 15997:2011

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

  EN 15997:2011/AC:2012

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

  EN 16005:2012

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

  EN 16005:2012/AC:2015

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

  EN 16029:2012

Ride-on, motorized vehicles intended for the transportation of persons and not intended fo...

  EN ISO 16089:2015

Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)

  EN ISO 16093:2017

Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)

  EN ISO 16119-1:2013

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: Ge...

  EN ISO 16119-2:2013

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 2: Ho...

  EN ISO 16119-3:2013

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sp...

  EN ISO 16119-4:2014

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fi...

  EN 16191:2014

Tunnelling machinery - Safety requirements

  EN 16203:2014

Safety of Industrial Trucks - Dynamic tests for verification of lateral stability - Counte...

  EN 16228-1:2014

Drilling and foundation equipment - Safety - Part 1: Common requirements

  EN 16228-2:2014

Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geote...

  EN 16228-3:2014

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equip...

  EN 16228-4:2014

Drilling and foundation equipment - Safety - Part 4: Foundation equipment

  EN 16228-5:2014

Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment

  EN 16228-6:2014

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equip...

  EN 16228-7:2014

Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment

  EN 16230-1:2013/A1:2014

Leisure karts - Part 1: Safety requirements and test methods for karts

  EN ISO 16230-1:2015

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic c...

  EN ISO 16231-1:2013

Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO ...

  EN ISO 16231-2:2015

Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of...

  EN 16246:2012

Agricultural machinery - Backhoes - Safety

  EN 16252:2012

Machines for compacting waste materials or recyclable fractions - Horizontal baling presse...

  EN 16307-1:2013/A1:2015

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requireme...

  EN 16307-5:2013

Industrial trucks - Safety requirements and verification - Part 5: Supplementary requireme...

  EN 16307-6:2014

Industrial trucks - Safety requirements and verification - Part 6: Supplementary requireme...

  EN 16327:2014

Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam sys...

  EN 16474:2015

Plastics and rubber machines - Tyre curing machines - Safety requirements

  EN 16486:2014

Machines for compacting waste materials or recyclable fractions - Compactors - Safety requ...

  EN 16500:2014

Machines for compacting waste materials or recyclable fractions - Vertical baling presses ...

  EN 16590-3:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control syst...

  EN 16590-4:2014

Tractors and machinery for agriculture and forestry - Safety-related parts of control syst...

  EN 16743:2016

Food processing machinery - Automatic industrial slicing machines - Safety and hygiene req...

  EN 16774:2016

Safety of machinery - Safety requirements for steel converter and associated equipment

  EN 16851:2017

Cranes - Light crane systems

  EN ISO 17916:2016

Safety of thermal cutting machines (ISO 17916:2016)

  EN ISO 18217:2015

Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)

  EN ISO 19085-1:2017

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)

  EN ISO 19085-2:2017

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (IS...

  EN ISO 19085-5:2017

Woodworking machines - Safety - Part 5: Dimension saws (ISO 19085-5:2017)

  EN ISO 19432:2012

Building construction machinery and equipment - Portable, hand-held, internal combustion e...

  EN ISO 19932-1:2013

Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requi...

  EN ISO 19932-2:2013

Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013...

  EN ISO 20361:2015

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015...

  EN ISO 22867:2011

Forestry and gardening machinery - Vibration test code for portable hand-held machines wit...

  EN ISO 22868:2011

Forestry and gardening machinery - Noise test code for portable hand-held machines with in...

  EN ISO 23125:2015

Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)

  EN ISO 28139:2009

Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safe...

  EN ISO 28881:2013

Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)

  EN ISO 28881:2013/AC:2013

Machine tools - Safety - Electro-discharge machines (ISO 28881:2013)

  EN ISO 28927-1:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-1:2009/A1:2017

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-2:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-3:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-4:2010

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-5:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-5:2009/A1:2015

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-6:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-7:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-8:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-8:2009/A1:2015

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-9:2009

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-10:2011

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-11:2011

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-12:2012

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN 60204-1:2006

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN 60204-1:2006/AC:2010

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN 60204-11:2000

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equi...

  EN 60204-11:2000/AC:2010

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equi...

  EN 60204-32:2008

Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoistin...

  EN 60204-33:2011

Safety of machinery - Electrical equipment of machines - Part 33: Requirements for semicon...

  EN 61310-1:2008

Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual,...

  EN 61310-2:2008

Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

  EN 61310-3:2008

Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the loc...

  EN 61496-1:2013

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirement...

  EN 61800-5-2:2007

Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Function...

  EN 62061:2005

Safety of machinery - Functional safety of safety-related electrical, electronic and progr...

  EN 62061:2005/AC:2010

Safety of machinery - Functional safety of safety-related electrical, electronic and progr...

  EN 50223:2015

Stationary electrostatic application equipment for ignitable flock material - Safety requi...

  EN 50348:2010

Stationary electrostatic application equipment for non-ignitable liquid coating material -...

  EN 50348:2010/AC:2010

Stationary electrostatic application equipment for non-ignitable liquid coating material -...

  EN 50434:2014

Safety of household and similar appliances - Particular requirements for mains operated sh...

  EN 50569:2013

Household and similar electrical appliances - Safety - Particular requirements for commerc...

  EN 50570:2013

Household and similar electrical appliances - Safety - Particular requirements for commerc...

  EN 50571:2013

Household and similar electrical appliances - Safety - Particular requirements for commerc...

  EN 50580:2012

Safety of hand-held electric motor operated tools - Particular requirements for spray guns

  EN 50580:2012/A1:2013

Safety of hand-held electric motor operated tools - Particular requirements for spray guns

  EN 50636-2-91:2014

Household and similar electrical appliances - Safety - Part 2-91: Particular requirements ...

  EN 50636-2-92:2014

Household and similar electrical appliances - Safety - Part 2-92: Particular requirements ...

  EN 50636-2-94:2014

Household and similar electrical appliances - Safety - Part 2-94: Particular requirements ...

  EN 50636-2-100:2014

Household and similar electrical appliances - Safety - Part 2-100: Particular requirements...

  EN 50636-2-107:2015

Safety of household and similar appliances - Part 2-107: Particular requirements for robot...

  EN 60204-31:2013

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EM...

  EN 60335-1:2012

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2012/AC:2014

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2012/A11:2014

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-2-8:2015

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements f...

  EN 60335-2-23:2003

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements ...

  EN 60335-2-36:2002

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-36:2002/AC:2007

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-36:2002/A11:2012

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-37:2002

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-37:2002/AC:2007

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-37:2002/A11:2012

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-37:2002/A12:2016

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-40:2003

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/AC:2010

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/AC:2006

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A11:2004

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A12:2005

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A13:2012

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A13:2012/AC:2013

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-42:2003

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements ...

  EN 60335-2-42:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements ...

  EN 60335-2-42:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements ...

  EN 60335-2-47:2003

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-47:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-47:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-48:2003

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-48:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-48:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-49:2003

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-49:2003/AC:2007

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-49:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-65:2003

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements ...

  EN 60335-2-65:2003/A11:2012

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements ...

  EN 60335-2-67:2012

Household and similar electrical appliances - Safety - Part 2-67: Particular requirements ...

  EN 60335-2-68:2012

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements ...

  EN 60335-2-69:2012

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements ...

  EN 60335-2-72:2012

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements ...

  EN 60335-2-77:2010

Safety of household and similar appliances - Part 2-77: Particular requirements for pedest...

  EN 60335-2-79:2012

Household and similar electrical appliances - Safety - Part 2-79: Particular requirements ...

  EN 60335-2-89:2010

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements ...

  EN 60335-2-95:2015

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements ...

  EN 60335-2-97:2006

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements ...

  EN 60335-2-97:2006/A12:2015

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements ...

  EN 60335-2-102:2016

Household and similar electrical appliances - Safety - Part 2-102: Particular requirements...

  EN 60335-2-103:2015

Household and similar electrical appliances - Safety - Part 2-103: Particular requirements...

  EN 60519-1:2015

Safety in installations for electroheating and electromagnetic processing - Part 1: Genera...

  EN 60745-2-1:2010

Hand-held motor-operated electric tools - Safety - Part 2-1: Particular requirements for d...

  EN 60745-2-3:2011

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for g...

  EN 60745-2-3:2011/A11:2014

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for g...

  EN 60745-2-3:2011/A12:2014

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for g...

  EN 60745-2-3:2011/A13:2015

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for g...

  EN 60745-2-6:2010

Hand-held motor-operated electric tools - Safety - Part 2-6: Particular requirements for h...

  EN 60745-2-11:2010

Hand-held motor-operated electric tools - Safety - Part 2-11: Particular requirements for ...

  EN 60745-2-12:2009

Hand-held motor-operated electric tools - Safety - Part 2-12: Particular requirements for ...

  EN 60745-2-13:2009

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for ...

  EN 60745-2-15:2009

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for ...

  EN 60745-2-16:2010

Hand-held motor-operated electric tools - Safety - Part 2-16: Particular requirements for ...

  EN 60745-2-17:2010

Hand-held motor-operated electric tools - Safety - Part 2-17: Particular requirements for ...

  EN 60745-2-18:2009

Hand-held motor-operated electric tools - Safety - Part 2-18: Particular requirements for ...

  EN 60745-2-19:2009

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for ...

  EN 60745-2-20:2009

Hand-held motor-operated electric tools - Safety - Part 2-20: Particular requirements for ...

  EN 60745-2-21:2009

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for ...

  EN 60745-2-22:2011

Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for ...

  EN 60745-2-22:2011/A11:2013

Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for ...

  EN 60745-2-23:2013

Hand-held motor-operated electric tools - Safety - Part 2-23: Particular requirements for ...

  EN 60947-5-3:2013

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching e...

  EN 60947-5-5:1997

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 60947-5-5:1997/A11:2013

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 61029-2-3:2011

Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements ...

  EN 61029-2-4:2011

Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements ...

  EN 61029-2-5:2011

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements ...

  EN 61029-2-5:2011/A11:2015

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements ...

  EN 61029-2-8:2010

Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements ...

  EN 61029-2-9:2012

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements ...

  EN 61029-2-9:2012/A11:2013

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements ...

  EN 61029-2-11:2012

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements...

  EN 61029-2-11:2012/A11:2013

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements...

  EN 61029-2-12:2011

Safety of transportable motor-operated electric tools - Part 2-12: Particular requirements...

  EN 62841-1:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-1:2015/AC:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-2:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-2:2014/AC:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-4:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-4:2014/AC:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-5:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-8:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-9:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-9:2015/AC:2016-10

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-10:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-11:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-14:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-1:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-1:2014/AC:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-6:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-6:2014/AC:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-9:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-9:2015/AC:2016-09

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-10:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-10:2015/AC:2016-07

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-13:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN ISO 15798:2010

Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2010)

  EN ISO 15883-1:2009

Washer-disinfectors - Part 1: General requirements, terms and definitions and tests (ISO 1...

  EN ISO 15883-2:2009

Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing the...

  EN ISO 15883-3:2009

Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing the...

  EN ISO 15883-4:2009

Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing che...

  EN 15986:2011

Symbol for use in the labelling of medical devices - Requirements for labelling of medical...

  EN ISO 16061:2009

Instrumentation for use in association with non-active surgical implants - General require...

  EN ISO 16201:2006

Technical aids for disabled persons - Environmental control systems for daily living (ISO ...

  EN ISO 17510-1:2009

Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 175...

  EN ISO 17510-2:2009

Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:20...

  EN ISO 17664:2004

Sterilization of medical devices - Information to be provided by the manufacturer for the ...

  EN ISO 17665-1:2006

Sterilization of health care products - Moist heat - Part 1: Requirements for the developm...

  EN ISO 18777:2009

Transportable liquid oxygen systems for medical use - Particular requirements (ISO 18777:2...

  EN ISO 18778:2009

Respiratory equipment - Infant monitors - Particular requirements (ISO 18778:2005)

  EN ISO 18779:2005

Medical devices for conserving oxygen and oxygen mixtures - Particular requirements (ISO 1...

  EN ISO 19054:2006

Rail systems for supporting medical equipment (ISO 19054:2005)

  EN 20594-1:1993

Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical eq...

  EN 20594-1:1993/A1:1997

Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical eq...

  EN 20594-1:1993/AC:1996

Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical eq...

  EN ISO 21534:2009

Non-active surgical implants - Joint replacement implants - Particular requirements (ISO 2...

  EN ISO 21535:2009

Non-active surgical implants - Joint replacement implants - Specific requirements for hip-...

  EN ISO 21536:2009

Non-active surgical implants - Joint replacement implants - Specific requirements for knee...

  EN ISO 21649:2009

Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)

  EN ISO 21969:2009

High-pressure flexible connections for use with medical gas systems (ISO 21969:2009)

  EN ISO 21987:2009

Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2009)

  EN ISO 22442-1:2007

Medical devices utilizing animal tissues and their derivatives - Part 1: Application of ri...

  EN ISO 22442-2:2007

Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourc...

  EN ISO 22442-3:2007

Medical devices utilizing animal tissues and their derivatives - Part 3: Validation of the...

  EN ISO 22523:2006

External limb prostheses and external orthoses - Requirements and test methods (ISO 22523:...

  EN ISO 22675:2016

Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods...

  EN ISO 23328-1:2008

Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to...

  EN ISO 23328-2:2009

Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspe...

  EN ISO 23747:2009

Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of ...

  EN ISO 25539-1:2009

Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO 2553...

  EN ISO 25539-1:2009/AC:2011

Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO 2553...

  EN ISO 25539-2:2009

Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2008...

  EN ISO 25539-2:2009/AC:2011

Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2008...

  EN ISO 26782:2009

Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time f...

  EN ISO 26782:2009/AC:2009

Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time f...

  EN 27740:1992

Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:198...

  EN 27740:1992/A1:1997

Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:198...

  EN 27740:1992/AC:1996

Instruments for surgery, scalpels with detachable blades, fitting dimensions (ISO 7740:198...

  EN ISO 81060-1:2012

Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated m...

  EN 60118-13:2005

Electroacoustics - Hearing aids -- Part 13: Electromagnetic compatibility (EMC)IEC 60118-1...

  EN 60522:1999

Determination of the permanent filtration of X-ray tube assembliesIEC 60522:1999

  EN 60580:2000

Medical electrical equipment - Dose area product metersIEC 60580:2000

  EN 60601-1:2006

Medical electrical equipment - Part 1: General requirements for basic safety and essential...

  EN 60601-1:2006/AC:2010

Medical electrical equipment - Part 1: General requirements for basic safety and essential...

  EN 60601-1:2006/A1:2013

Medical electrical equipment - Part 1: General requirements for basic safety and essential...

  EN 60601-1-1:2001

Medical electrical equipment - Part 1-1: General requirements for safety - Collateral stan...

  EN 60601-1-2:2015

Medical electrical equipment - Part 1-2: General requirements for basic safety and essenti...

  EN 60601-1-3:2008

Medical electrical equipment - Part 1-3: General requirements for basic safety and essenti...

  EN 60601-1-3:2008/AC:2010

Medical electrical equipment - Part 1-3: General requirements for basic safety and essenti...

  EN 60601-1-3:2008/A11:2016

Medical electrical equipment - Part 1-3: General requirements for basic safety and essenti...

  EN 60601-1-4:1996

Medical electrical equipment - Part 1-4: General requirements for safety - Collateral stan...

  EN 60601-1-4:1996/A1:1999

Medical electrical equipment - Part 1-4: General requirements for safety - Collateral stan...

  EN 60601-1-6:2010

Medical electrical equipment - Part 1-6: General requirements for basic safety and essenti...

  EN 60601-1-8:2007

Medical electrical equipment - Part 1-8: General requirements for basic safety and essenti...

  EN 60601-1-8:2007/AC:2010

Medical electrical equipment - Part 1-8: General requirements for basic safety and essenti...

  EN 60601-1-8:2007/A11:2017

Medical electrical equipment - Part 1-8: General requirements for basic safety and essenti...

  EN 60601-1-10:2008

Medical electrical equipment - Part 1-10: General requirements for basic safety and essent...

  EN 60601-1-11:2010

Medical electrical equipment - Part 1-11: General requirements for basic safety and essent...

  EN 60601-2-1:1998

Medical electrical equipment - Part 2-1: Particular requirements for the safety of electro...

  EN 60601-2-1:1998/A1:2002

Medical electrical equipment - Part 2-1: Particular requirements for the safety of electro...

  EN 60601-2-2:2009

Medical electrical equipment - Part 2-2: Particular requirements for the basic safety and ...

  EN 60601-2-3:1993

Medical electrical equipment - Part 2: Particular requirements for the safety of short-wav...

  EN 60601-2-3:1993/A1:1998

Medical electrical equipment - Part 2: Particular requirements for the safety of short-wav...

  EN 60601-2-4:2003

Medical electrical equipment -- Part 2-4: Particular requirements for the safety of cardia...

  EN 60601-2-5:2000

Medical electrical equipment - Part 2-5: Particular requirements for the safety of ultraso...

  EN 60601-2-8:1997

Medical electrical equipment - Part 2: Particular requirements for the safety of therapeut...

  EN 60601-2-8:1997/A1:1997

Medical electrical equipment - Part 2: Particular requirements for the safety of therapeut...

  EN 60601-2-10:2000

Medical electrical equipment - Part 2-10: Particular requirements for the safety of nerve ...

  EN 60601-2-10:2000/A1:2001

Medical electrical equipment - Part 2-10: Particular requirements for the safety of nerve ...

  EN 60601-2-11:1997

Medical electrical equipment - Part 2-11: Particular requirements for the safety of gamma ...

  EN 60601-2-11:1997/A1:2004

Medical electrical equipment - Part 2-11: Particular requirements for the safety of gamma ...

  EN 60601-2-12:2006

Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung v...

  EN 60601-2-13:2006

Medical electrical equipment - Part 2-13: Particular requirements for the safety and essen...

  EN 60601-2-13:2006/A1:2007

Medical electrical equipment - Part 2-13: Particular requirements for the safety and essen...

  EN 60601-2-16:1998

Medical electrical equipment - Part 2-16: Particular requirements for the safety of haemod...

  EN 60601-2-16:1998/AC:1999

Medical electrical equipment - Part 2-16: Particular requirements for the safety of haemod...

  EN 60601-2-17:2004

Medical electrical equipment - Part 2-17: Particular requirements for the safety of automa...

  EN 60601-2-18:1996

Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopi...

  EN 60601-2-18:1996/A1:2000

Medical electrical equipment - Part 2: Particular requirements for the safety of endoscopi...

  EN 60601-2-19:2009

Medical electrical equipment - Part 2-19: Particular requirements for the basic safety and...

  EN 60601-2-20:2009

Medical electrical equipment - Part 2-20: Particular requirements for the basic safety and...

  EN 60601-2-21:2009

Medical electrical equipment - Part 2-21: Particular requirements for the basic safety and...

  EN 60601-2-22:1996

Medical electrical equipment - Part 2: Particular requirements for the safety of diagnosti...

  EN 60601-2-23:2000

Medical electrical equipment - Part 2-23: Particular requirements for the safety, includin...

  EN 60601-2-24:1998

Medical electrical equipment - Part 2-24: Particular requirements for the safety of infusi...

  EN 60601-2-25:1995

Medical electrical equipment - Part 2-25: Particular requirements for the safety of electr...

  EN 60601-2-25:1995/A1:1999

Medical electrical equipment - Part 2-25: Particular requirements for the safety of electr...

  EN 60601-2-26:2003

Medical electrical equipment - Part 2-26: Particular requirements for the safety of electr...

  EN 60601-2-27:2006

Medical electrical equipment - Part 2-27: Particular requirements for the safety, includin...

  EN 60601-2-27:2006/AC:2006

Medical electrical equipment - Part 2-27: Particular requirements for the safety, includin...

  EN 60601-2-28:2010

Medical electrical equipment - Part 2-28: Particular requirements for the basic safety and...

  EN 60601-2-29:2008

Medical electrical equipment - Part 2-29: Particular requirements for the basic safety and...

  EN 60601-2-30:2000

Medical electrical equipment -- Part 2-30: Particular requirements for the safety, includi...

  EN 60601-2-33:2010

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and...

  EN 60601-2-33:2010/A1:2015

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and...

  EN 60601-2-33:2010/A2:2015

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and...

  EN 60601-2-33:2010/AC:2016-03

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and...

  EN 60601-2-33:2010/A12:2016

Medical electrical equipment - Part 2-33: Particular requirements for the basic safety and...

  EN 60601-2-34:2000

Medical electrical equipment - Part 2-34: Particular requirements for the safety, includin...

  EN 60601-2-36:1997

Medical electrical equipment - Part 2: Particular requirements for the safety of equipment...

  EN 60601-2-37:2008

Medical electrical equipment - Part 2-37: Particular requirements for the basic safety and...

  EN 60601-2-39:2008

Medical electrical equipment - Part 2-39: Particular requirements for basic safety and ess...

  EN 60601-2-40:1998

Medical electrical equipment - Part 2-40: Particular requirements for the safety of electr...

  EN 60601-2-41:2009

Medical electrical equipment - Part 2-41: Particular requirements for basic safety and ess...

  EN 60601-2-43:2010

Medical electrical equipment - Part 2-43: Particular requirements for basic safety and ess...

  EN 60601-2-44:2009

Medical electrical equipment - Part 2-44: Particular requirements for the basic safety and...

  EN 60601-2-45:2001

Medical electrical equipment -- Part 2-45: Particular requirements for the safety of mammo...

  EN 60601-2-46:1998

Medical electrical equipment -- Part 2-46: Particular requirements for the safety of opera...

  EN 60601-2-47:2001

Medical electrical equipment - Part 2-47: Particular requirements for the safety, includin...

  EN 60601-2-49:2001

Medical electrical equipment - Part 2-49: Particular requirements for the safety of multif...

  EN 60601-2-50:2009

Medical electrical equipment - Part 2-50: Particular requirements for the basic safety and...

  EN 60601-2-51:2003

Medical electrical equipment - Part 2-51: Particular requirements for safety, including es...

  EN 60601-2-52:2010

Medical electrical equipment - Part 2-52: Particular requirements for basic safety and ess...

  EN 60601-2-52:2010/AC:2011

Medical electrical equipment - Part 2-52: Particular requirements for basic safety and ess...

  EN 60601-2-54:2009

Medical electrical equipment - Part 2-54: Particular requirements for the basic safety and...

  EN 60627:2001

Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic a...

  EN 60627:2001/AC:2002

Diagnostic X-ray imaging equipment - Characteristics of general purpose and mammographic a...

  EN 60645-1:2001

Electroacoustics - Audiological equipment - Part 1: Pure-tone audiometersIEC 60645-1:2001

  EN 60645-2:1997

Audiometers - Part 2: Equipment for speech audiometryIEC 60645-2:1993

  EN 60645-3:2007

Electroacoustics - Audiometric equipment - Part 3: Test signals of short durationIEC 60645...

  EN 60645-4:1995

Audiometers - Part 4: Equipment for extended high-frequency audiometryIEC 60645-4:1994

  EN 61217:2012

Radiotherapy equipment - Coordinates, movements and scalesIEC 61217:2011

  EN 61676:2002

Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of...

  EN 61676:2002/A1:2009

Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of...

  EN 62083:2009

Medical electrical equipment - Requirements for the safety of radiotherapy treatment plann...

  EN 62220-1:2004

Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1: ...

  EN 62220-1-2:2007

Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-2...

  EN 62220-1-3:2008

Medical electrical equipment - Characteristics of digital X-ray imaging devices - Part 1-3...

  EN 62304:2006

Medical device software - Software life-cycle processesIEC 62304:2006

  EN 62304:2006/AC:2008

Medical device software - Software life-cycle processesIEC 62304:2006

  EN 62366:2008

Medical devices - Application of usability engineering to medical devicesIEC 62366:2007

  EN 80601-2-35:2009

Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and...

  EN 80601-2-58:2009

Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and...

  EN 80601-2-59:2009

Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and...

  EN 13480-4:2012/A1:2013

Metallic industrial piping - Part 4: Fabrication and installation

  EN 13480-4:2012/A2:2015

Metallic industrial piping - Part 4: Fabrication and installation

  EN 13480-5:2017

Metallic industrial piping - Part 5: Inspection and testing

  EN 13480-6:2017

Metallic industrial piping - Part 6: Additional requirements for buried piping

  EN 13480-8:2017

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium a...

  EN 13547:2013

Industrial valves - Copper alloy ball valves

  EN ISO 13585:2012

Brazing - Qualification test of brazers and brazing operators (ISO 13585:2012)

  EN 13648-1:2008

Cryogenic vessels - Safety devices for protection against excessive pressure - Part 1: Saf...

  EN 13648-2:2002

Cryogenic vessels - Safety devices for protection against excessive pressure - Part 2: Bur...

  EN 13709:2010

Industrial valves - Steel globe and globe stop and check valves

  EN 13789:2010

Industrial valves - Cast iron globe valves

  EN 13831:2007

Closed expansion vessels with built in diaphragm for installation in water

  EN 13835:2012

Founding - Austenitic cast irons

  EN 13923:2005

Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing

  EN 14129:2014

LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels

  EN 14197-1:2003

Cryogenic vessels - Static non-vacuum insulated vessels - Part 1: Fundamental requirements

  EN 14197-2:2003

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, ins...

  EN 14197-2:2003/A1:2006

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, ins...

  EN 14197-2:2003/AC:2006

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, ins...

  EN 14197-3:2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements

  EN 14197-3:2004/A1:2005

Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements

  EN 14197-3:2004/AC:2004

Cryogenic vessels - Static non-vacuum insulated vessels - Part 3: Operational requirements

  EN 14222:2003

Stainless steel shell boilers

  EN 14276-1:2006/A1:2011

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General re...

  EN 14276-2:2007/A1:2011

Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General req...

  EN 14359:2006/A1:2010

Gas-loaded accumulators for fluid power applications

  EN 14382:2005/A1:2009

Safety devices for gas pressure regulating stations and installations - Gas safety shut-of...

  EN 14382:2005/A1:2009/AC:2009

Safety devices for gas pressure regulating stations and installations - Gas safety shut-of...

  EN 14394:2005/A1:2008

Heating boilers - Heating boilers with forced draught burners - Nominal heat output not ex...

  EN 14570:2014

LPG equipment and accessories - Equipping of overground and underground LPG vessels

  EN 14585-1:2006

Corrugated metal hose assemblies for pressure applications - Part 1: Requirements

  EN 14917:2009/A1:2012

Metal bellows expansion joints for pressure applications

  EN 15001-1:2009

Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5...

  EN ISO 15493:2003

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS...

  EN ISO 15493:2003/A1:2017

Plastics piping systems for industrial applications - Acrylonitrile-butadiene-styrene (ABS...

  EN ISO 15613:2004

Specification and qualification of welding procedures for metallic materials - Qualificati...

  EN ISO 15614-1:2004

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-1:2004/A1:2008

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-1:2004/A2:2012

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-2:2005

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-2:2005/AC:2009

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-4:2005

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-4:2005/AC:2007

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-5:2004

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-6:2006

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-7:2007

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-8:2016

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15614-11:2002

Specification and qualification of welding procedures for metallic materials - Welding pro...

  EN ISO 15620:2000

Welding - Friction welding of metallic materials (ISO 15620:2000)

  EN 15776:2011/A1:2015

Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels...

  EN ISO 16135:2006

Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)

  EN ISO 16136:2006

Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)

  EN ISO 16137:2006

Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)

  EN ISO 16138:2006

Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)

  EN ISO 16139:2006

Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)

  EN 16767:2016

Industrial valves - Steel and cast iron check valves

  EN ISO 21009-2:2015

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (IS...

  EN ISO 21013-3:2016

Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and...

  EN ISO 21028-1:2016

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1...

  EN ISO 21787:2006

Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)

  EN 12270:2013

Mountaineering equipment - Chocks - Safety requirements and test methods

  EN 12275:2013

Mountaineering equipment - Connectors - Safety requirements and test methods

  EN 12276:2013

Mountaineering equipment - Frictional anchors - Safety requirements and test methods

  EN 12277:2015

Mountaineering equipment - Harnesses - Safety requirements and test methods

  EN 12278:2007

Montaineering equipment - Pulleys - Safety requirements and test methods

  EN ISO 12311:2013

Personal protective equipment Test methods for sunglasses and related eyewear (ISO 12311:...

  EN ISO 12312-1:2013

Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general ...

  EN ISO 12312-1:2013/A1:2015

Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general ...

  EN ISO 12312-2:2015

Eye and face protection - Sunglasses and related eyewear - Part 2: Filters for direct obse...

  EN ISO 12401:2009

Small craft - Deck safety harness and safety line - Safety requirements and test methods (...

  EN ISO 12402-2:2006

Personal flotation devices Part 2: Lifejackets, performance level 275 Safety requirement...

  EN ISO 12402-3:2006

Personal flotation devices Part 3: Lifejackets, performance level 150 Safety requirement...

  EN ISO 12402-4:2006

Personal flotation devices Part 4: Lifejackets, performance level 100 Safety requirement...

  EN ISO 12402-5:2006

Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO 1...

  EN ISO 12402-5:2006/AC:2006

Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO 1...

  EN ISO 12402-5:2006/A1:2010

Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO 1...

  EN ISO 12402-6:2006

Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safet...

  EN ISO 12402-6:2006/A1:2010

Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safet...

  EN ISO 12402-8:2006

Personal flotation devices - Part 8: Accessories - Safety requirements and test methods (I...

  EN ISO 12402-8:2006/A1:2011

Personal flotation devices - Part 8: Accessories - Safety requirements and test methods (I...

  EN ISO 12402-9:2006

Personal flotation devices Part 9: Test methods (ISO 12402-9:2006)

  EN ISO 12402-10:2006

Personal flotation devices Part 10: Selection and application of personal flotation devic...

  EN 12477:2001

Protective gloves for welders

  EN 12477:2001/A1:2005

Protective gloves for welders

  EN 12492:2012

Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods

  EN 12628:1999

Diving accessories Combined buoyancy and rescue devices Functional and safety requiremen...

  EN 12841:2006

Personal fall protection equipment - Rope access systems - Rope adjustment devices

  EN 12941:1998

Respiratory protective devices - Powered filtering devices incorporating a helmet or a hoo...

  EN 12941:1998/A1:2003

Respiratory protective devices - Powered filtering devices incorporating a helmet or a hoo...

  EN 12941:1998/A2:2008

Respiratory protective devices - Powered filtering devices incorporating a helmet or a hoo...

  EN 12942:1998

Respiratory protective devices - Power assisted filtering devices incorporating full face ...

  EN 12942:1998/A1:2002

Respiratory protective devices - Power assisted filtering devices incorporating full face ...

  EN 12942:1998/A2:2008

Respiratory protective devices - Power assisted filtering devices incorporating full face ...

  EN 13034:2005/A1:2009

Protective clothing against liquid chemicals - Performance requirements for chemical prote...

  EN 13061:2009

Protective clothing - Shin guards for association football players - Requirements and test...

  EN 13087-1:2000

Protective helmets Test methods Part 1: Conditions and conditioning

  EN 13087-2:2012

Protective helmets Test methods Part 2: Shock absorption

  EN 13087-3:2000

Protective helmets Test methods Part 3: Resistance to penetration

  EN 13087-4:2012

Protective helmets Test methods Part 4: Retention system effectiveness

  EN 13087-5:2012

Protective helmets Test methods Part 5: Retention system strength

  EN 13087-6:2012

Protective helmets Test methods Part 6: Field of vision

  EN 13087-7:2000

Protective helmets Test methods Part 7: Flame resistance

  EN 13087-8:2000

Protective helmets Test methods Part 8: Electrical properties

  EN 13087-10:2012

Protective helmets Test methods Part 10: Resistance to radiant heat

  EN 13089:2011

Mountaineering equipment Ice-tools Safety requirements and test methods

  EN 13138-1:2008

Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for bu...

  EN 13158:2009

Protective clothing - Protective jackets, body and shoulder protectors for equestrian use:...

  EN 13178:2000

Personal eye-protection - Eye protectors for snowmobile users

  EN 13274-1:2001

Respiratory protective devices Methods of test Part 1: Determination of inward leakage a...

  EN 13274-2:2001

Respiratory protective devices Methods of test Part 2: Practical performance tests

  EN 13274-3:2001

Respiratory protective devices Methods of test Part 3: Determination of breathing resist...

  EN 13274-4:2001

Respiratory protective devices Methods of test Part 4: Flame tests

  EN 13274-5:2001

Respiratory protective devices Methods of test Part 5: Climatic conditions

  EN 13274-6:2001

Respiratory protective devices Methods of test Part 6: Determination of carbon dioxide c...

  EN 13274-7:2008

Respiratory protective devices Methods of test Part 7: Determination of particle filter ...

  EN 13274-8:2002

Respiratory protective devices Methods of test Part 8: Determination of dolomite dust cl...

  EN 13277-1:2000

Protective equipment for martial arts - Part 1: General requirements and test methods

  EN 13277-2:2000

Protective equipment for martial arts - Part 2: Additional requirements and test methods f...

  EN 13277-3:2013

Protective equipment for martial arts - Part 3: Additional requirements and test methods f...

  EN 13277-4:2001

Protective equipment for martial arts - Part 4: Additional requirements and test methods f...

  EN 13277-4:2001/A1:2007

Protective equipment for martial arts - Part 4: Additional requirements and test methods f...

  EN 13277-5:2002

Protective equipment for martial arts - Part 5: Additional requirements and test methods f...

  EN 13277-6:2003

Protective equipment for martial arts - Part 6: Additional requirements and test methods f...

  EN 13277-7:2009

Protective equipment for martial arts - Part 7: Additional requirements and test methods f...

  EN 13277-8:2017

Protective equipment for martial arts - Part 8: Additional requirements and test methods f...

  EN ISO 13287:2012

Personal protective equipment Footwear Test method for slip resistance (ISO 13287:2012)

  EN 13356:2001

Visibility accessories for non-professional use - Test methods and requirements

  EN 13484:2012

Helmets for users of luges

  EN ISO 13506-1:2017

Protective clothing against heat and flame Part 1: Test method for complete garments Mea...

  EN 13546:2002/A1:2007

Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for fiel...

  EN 13567:2002/A1:2007

Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fenc...

  EN 13594:2015

Protective gloves for motorcycle riders - Requirements and test methods

  EN 13595-1:2002

Protective clothing for professional motorcycle riders - Jackets, trousers and one piece o...

  EN 13595-2:2002

Protective clothing for professional motorcycle riders Jackets, trousers and one-piece or...

  EN 13595-3:2002

Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece o...

  EN 13595-4:2002

Protective clothing for professional motorcycle riders Jackets, trousers and one-piece or...

  EN 13634:2017

Protective footwear for motorcycle riders - Requirements and test methods

  EN ISO 13688:2013

Protective clothing - General requirements (ISO 13688:2013)

  EN 13781:2012

Protective helmets for drivers and passengers of snowmobiles and bobsleighs

  EN 13794:2002

Respiratory protective devices - Self-contained closed-circuit breathing apparatus for esc...

  EN 13819-1:2002

Hearing protectors Testing Part 1: Physical test methods

  EN 13819-2:2002

Hearing protectors Testing Part 2: Acoustic test methods

  EN 13832-1:2006

Footwear protecting against chemicals Part 1: Terminology and test methods

  EN 13832-2:2006

Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to che...

  EN 13832-3:2006

Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant...

  EN 13911:2017

Protective clothing for firefighters Requirements and test methods for fire hoods for fir...

  EN 13921:2007

Personal protective equipment Ergonomic principles

  EN 13949:2003

Respiratory equipment - Open-circuit self-contained diving apparatus for use with compress...

  EN ISO 13982-1:2004

Protective clothing for use against solid particulates - Part 1: Performance requirements ...

  EN ISO 13982-1:2004/A1:2010

Protective clothing for use against solid particulates - Part 1: Performance requirements ...

  EN ISO 13982-2:2004

Protective clothing for use against solid particulates Part 2: Test method of determinati...

  EN ISO 13995:2000

Protective clothing Mechanical properties Test method for the determination of the resis...

  EN ISO 13997:1999

Protective clothing Mechanical properties Determination of resistance to cutting by shar...

  EN ISO 13998:2003

Protective clothing - Aprons, trousers and vests protecting against cuts and stabs by hand...

  EN 14021:2003

Stone shields for off-road motorcycling suited to protect riders against stones and debris...

  EN 14052:2012/A1:2012

High performance industrial helmets

  EN 14058:2017

Protective clothing - Garments for protection against cool environments

  EN ISO 14116:2015

Protective clothing Protection against flame Limited flame spread materials, material as...

  EN 14120:2003/A1:2007

Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports eq...

  EN 14126:2003

Protective clothing - Performance requirements and tests methods for protective clothing a...

  EN 14126:2003/AC:2004

Protective clothing - Performance requirements and tests methods for protective clothing a...

  EN 14143:2013

Respiratory equipment - Self-contained re-breathing diving apparatus

  EN 14225-1:2017

Diving suits - Part 1: Wet suits - Requirements and test methods

  EN 14225-2:2017

Diving suits - Part 2: Dry suits - Requirements and test methods

  EN 14225-3:2017

Diving suits - Part 3: Actively heated or cooled suit systems and components - Requirement...

  EN 14225-4:2005

Diving suits Part 4: One atmosphere suits (ADS) - Human factors requirements and test met...

  EN 14325:2004

Protective clothing against chemicals Test methods and performance classification of chem...

  EN 14328:2005

Protective clothing - Gloves and armguards protecting against cuts by powered knives - Req...

  EN 14360:2004

Protective clothing against rain Test method for ready made garments Impact from above w...

  EN 14387:2004/A1:2008

Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, test...

  EN 14404:2004/A1:2010

Personal protective equipment Knee protectors for work in the kneeling position

  EN 14435:2004

Respiratory protective devices - Self-contained open-circuit compressed air breathing appa...

  EN 14458:2004

Personal eye-equipment Faceshields and visors for use with firefighters' and high perform...

  EN ISO 14460:1999

Protective clothing for automobile racing drivers - Protection against heat and flame - Pe...

  EN ISO 14460:1999/AC:1999

Protective clothing for automobile racing drivers - Protection against heat and flame - Pe...

  EN ISO 14460:1999/A1:2002

Protective clothing for automobile racing drivers - Protection against heat and flame - Pe...

  EN 14529:2005

Respiratory protective devices - Self-contained open-circuit compressed air breathing appa...

  EN 14593-1:2005

Respiratory protective devices - Compressed air line breathing apparatus with demand valve...

  EN 14593-2:2005

Respiratory protective devices Compressed air line breathing apparatus with demand valve ...

  EN 14594:2005

Respiratory protective devices - Continuous flow compressed air line breathing apparatus -...

  EN 14594:2005/AC:2005

Respiratory protective devices - Continuous flow compressed air line breathing apparatus -...

  EN 14605:2005/A1:2009

Protective clothing against liquid chemicals - performance requirements for clothing with ...

  EN 14786:2006

Protective clothing Determination of resistance to penetration by sprayed liquid chemical...

  EN ISO 14877:2002

Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2...

  EN ISO 15025:2002

Protective clothing Protection against heat and flame Method of test for limited flame s...

  EN ISO 15027-1:2012

Immersion suits - Part 1: Constant wear suits, requirements including safety (ISO 15027-1:...

  EN ISO 15027-2:2012

Immersion suits - Part 2: Abandonment suits, requirements including safety (ISO 15027-2:20...

  EN ISO 15027-3:2012

Immersion suits Part 3: Test methods (ISO 15027-3:2012)

  EN 15090:2012

Footwear for firefighters

  EN 15151-1:2012

Mountaineering equipment - Braking devices - Part 1: Braking devices with manually assiste...

  EN 15333-1:2008

Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - ...

  EN 15333-1:2008/AC:2009

Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - ...

  EN 15333-2:2009

Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - ...

  EN 15613:2008

Knee and elbow protectors for indoor sports - Safety requirements and test methods

  EN 15614:2007

Protective clothing for firefighters Laboratory test methods and performance requirements...

  EN ISO 15831:2004

Clothing Physiological effects Measurement of thermal insulation by means of a thermal m...

  EN 16027:2011

Protective clothing - Gloves with protective effect for association football goal keepers

  EN 16350:2014

Protective gloves - Electrostatic properties

  EN 16473:2014

Firefighters helmets - Helmets for technical rescue

  EN 16689:2017

Protective clothing for firefighters Performance requirements for protective clothing for...

  EN 16716:2017

Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods

  EN ISO 17249:2013

Safety footwear with resistance to chain saw cutting (ISO 17249:2013)

  EN ISO 17249:2013/AC:2014

Safety footwear with resistance to chain saw cutting (ISO 17249:2013)

  EN ISO 17491-3:2008

Protective clothing Test methods for clothing providing protection against chemicals Par...

  EN ISO 17491-4:2008

Protective clothing Test methods for clothing providing protection against chemicals Par...

  EN ISO 19918:2017

Protective clothing Protection against chemicals Measurement of cumulative permeation of...

  EN ISO 20344:2011

Personal protective equipment Test methods for footwear (ISO 20344:2011)

  EN ISO 20345:2011

Personal protective equipment - Safety footwear (ISO 20345:2011)

  EN ISO 20346:2014

Personal protective equipment - Protective footwear (ISO 20346:2014)

  EN ISO 20347:2012

Personal protective equipment - Occupational footwear (ISO 20347:2012)

  EN ISO 20349-1:2017

Personal protective equipment Footwear protecting against risks in foundries and welding ...

  EN ISO 20349-2:2017

Personal protective equipment Footwear protecting against risks in foundries and welding ...

  EN ISO 20471:2013

High visibility clothing - Test methods and requirements (ISO 20471:2013, Corrected versio...

  EN ISO 20471:2013/A1:2016

High visibility clothing - Test methods and requirements (ISO 20471:2013, Corrected versio...

  EN 24869-1:1992

Acoustics Hearing protectors Subjective method for the measurement of sound attenuation ...

  EN ISO 27065:2017

Protective clothing - Performance requirements for protective clothing worn by operators a...

  EN 50286:1999

Electrical insulating protective clothing for low-voltage installations

  EN 50321:1999

Electrically insulating footwear for working on low voltage installations

  EN 50365:2002

Electrically insulating helmets for use on low voltage installations

  EN 60743:2001

Live working Terminology for tools, equipment and devices

  EN 60743:2001/A1:2008

IEC 60743:2001/A1:2008

  EN 60895:2003

Live working Conductive clothing for use at nominal voltage up to 800 kV a.c. and 600 kV...

  EN 60903:2003

Live working Gloves of insulating material

  EN 60984:1992

Sleeves of insulating material for live working

  EN 60984:1992/A1:2002

IEC 60984:1990/A1:2002

  EN 302 454 V2.2.1

Meteorological Aids (Met Aids); Radiosondes to be used in the 1 668,4 MHz to 1 690 MHz fre...

  EN 302 617 V2.3.1

Ground-based UHF radio transmitters, receivers and transceivers for the UHF aeronautical m...

  EN 303 520 V1.1.1

Short Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy device...

  EN 617:2001+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for the equipment ...

  EN 618:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 619:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 620:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt con...

  EN 12895:2015

Industrial trucks - Electromagnetic compatibility

  EN 13241-1:2003+A1:2011

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products wi...

  EN 14010:2003+A1:2009

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EM...

  EN 16361:2013+A1:2016

Power operated pedestrian doors - Product standard, performance characteristics - Pedestri...

  EN 50083-2:2012/A1:2015

Cable networks for television signals, sound signals and interactive services - Part 2: El...

  EN 50121-3-1:2017

Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and...

  EN 50121-3-2:2016

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

  EN 50121-4:2016

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of th...

  EN 50121-5:2017

Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fi...

  EN 50270:2015

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of ...

  EN 50270:2015/AC:2016-08

Electromagnetic compatibility - Electrical apparatus for the detection and measurement of ...

  EN 60669-2-1:2004/A1:2009

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60730-2-5:2002/A1:2004

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60730-2-5:2002/A2:2010

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60730-2-8:2002/A1:2003

Automatic electrical controls for household and similar use - Part 2-8: Particular require...

  EN 60730-2-14:1997/A1:2001

Automatic electrical controls for household and similar use - Part 2-14: Particular requir...

  EN 60947-1:2007/A2:2014

Low-voltage switchgear and controlgear - Part 1: General rules

  EN 60947-1:2007/A1:2011

Low-voltage switchgear and controlgear - Part 1: General rules

  EN 60947-2:2006/A1:2009

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60947-2:2006/A2:2013

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60947-3:2009/A1:2012

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnec...

  EN 60947-4-1:2010/A1:2012

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electro...

  EN 60947-5-1:2004/A1:2009

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-2:2007/A1:2012

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching e...

  EN 60947-5-3:1999/A1:2005

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching e...

  EN 60947-6-1:2005/A1:2014

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer ...

  EN 60947-6-2:2003/A1:2007

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control a...

  EN 60947-8:2003/A2:2012

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protec...

  EN 60947-8:2003/A1:2006

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protec...

  EN 61000-6-3:2007/A1:2011

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for ...

  EN 61000-6-4:2007/A1:2011

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for ...

  EN 61000-6-5:2015

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment...

  EN 61008-1:2012/A1:2014

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61543:1995/A2:2006

Residual current-operated protective devices (RCDs) for household and similar use - Electr...

  EN 61800-3:2004/A1:2012

Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific te...

  EN 62020:1998/A1:2005

Electrical accessories - Residual current monitors for household and similar uses (RCMs)

  EN 60034-5:2001/A1:2007

Rotating electrical machines - Part 5: Degrees of protection provided by the integral desi...

  EN 60034-7:1993/A1:2001

Rotating electrical machines - Part 7: Classification of types of construction, mounting a...

  EN 60034-8:2007/A1:2014

Rotating electrical machines - Part 8: Terminal markings and direction of rotation

  EN 60034-9:2005/A1:2007

Rotating electrical machines - Part 9: Noise limits

  EN 60034-12:2002/A1:2007

Rotating electrical machines - Part 12: Starting performance of single-speed three-phase c...

  EN 60034-14:2004/A1:2007

Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaf...

  EN 60051-3:1989/A1:1995

Direct acting indicating analogue electrical measuring instruments and their accessories -...

  EN 60051-9:1989/A1:1995

Direct acting indicating analogue electrical-measuring instruments and their accessories -...

  EN 60051-9:1989/A2:1995

Direct acting indicating analogue electrical-measuring instruments and their accessories -...

  EN 60127-1:2006/A1:2011

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for min...

  EN 60127-1:2006/A2:2015

Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for min...

  EN 60127-4:2005/A2:2013

Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mo...

  EN 60127-4:2005/A1:2009

Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mo...

  EN 60155:1995/A2:2007

Glow-starters for fluorescent lamps

  EN 60155:1995/A1:1995

Glow-starters for fluorescent lamps

  EN 60204-1:2006/A1:2009

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN 60215:1989/A2:1994

Safety requirements for radio transmitting equipment

  EN 60215:1989/A1:1992

Safety requirements for radio transmitting equipment

  EN IEC 60238:2018

Edison screw lampholders

  EN 60252-1:2011/A1:2013

AC motor capacitors - Part 1: General - Performance, testing and rating - Safety requireme...

  EN 60252-2:2011/A1:2013

AC motor capacitors - Part 2: Motor start capacitors

  EN 60269-1:2007/A1:2009

Low-voltage fuses - Part 1: General requirements

  EN 60269-1:2007/A2:2014

Low-voltage fuses - Part 1: General requirements

  HD 60269-3:2010/A1:2013

Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled pers...

  EN 60269-4:2009/A1:2012

Low-voltage fuses - Part 4: Supplementary requirements for fuse-links for the protection o...

  EN 60309-1:1999/A2:2012

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

  EN 60309-1:1999/A1:2007

Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements

  EN 60309-2:1999/A1:2007

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchan...

  EN 60309-2:1999/A2:2012

Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchan...

  EN 60309-4:2007/A1:2012

Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outle...

  EN 60320-1:2001/A1:2007

Appliance couplers for household and similar general purposes - Part 1: General requiremen...

  EN 60320-2-4:2006/A1:2009

Appliance couplers for household and similar general purposes - Part 2-4: Appliance couple...

  EN 60332-1-1:2004/A1:2015

Tests on electric and optical fibre cables under fire conditions - Part 1-1: Test for vert...

  EN 60332-1-2:2004/A1:2015

Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vert...

  EN 60335-2-2:2010/A1:2013

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements f...

  EN 60335-2-4:2010/A1:2015

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements f...

  EN 60335-2-7:2010/A1:2013

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements f...

  EN 60335-2-8:2015/A1:2016

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements f...

  EN 60335-2-9:2003/A2:2006

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements f...

  EN 60335-2-9:2003/A1:2004

Household and similar electrical appliances - Safety - Part 2-9: Particular requirements f...

  EN 60335-2-10:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-10: Particular requirements ...

  EN 60335-2-11:2010/A1:2015

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements ...

  EN 60335-2-12:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements ...

  EN 60335-2-15:2002/A1:2005

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2002/A2:2008

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-16:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-16: Particular requirements ...

  EN 60335-2-16:2003/A2:2012

Household and similar electrical appliances - Safety - Part 2-16: Particular requirements ...

  EN 60335-2-21:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements ...

  EN 60335-2-21:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements ...

  EN 60335-2-23:2003/A2:2015

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements ...

  EN 60335-2-23:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements ...

  EN 60335-2-25:2012/A1:2015

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements ...

  EN 60335-2-25:2012/A2:2016

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements ...

  EN 60335-2-26:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-26: Particular requirements ...

  EN 60335-2-28:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements ...

  EN 60335-2-29:2004/A2:2010

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements ...

  EN 60335-2-32:2003/A2:2015

Household and similar electrical appliances - Safety - Part 2-32: Particular requirements ...

  EN 60335-2-32:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-32: Particular requirements ...

  EN 60335-2-36:2002/A1:2004

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-36:2002/A2:2008

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements ...

  EN 60335-2-37:2002/A1:2008

Household and similar electrical appliances - Safety - Part 2-37: Particular requirements ...

  EN 60335-2-38:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-38: Particular requirements ...

  EN 60335-2-39:2003/A1:2004

Household and similar electrical appliances - Safety - Part 2-39: Particular requirements ...

  EN 60335-2-39:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-39: Particular requirements ...

  EN 60335-2-40:2003/A1:2006

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A2:2009

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-41:2003/A2:2010

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements ...

  EN 60335-2-41:2003/A1:2004

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements ...

  EN 60335-2-42:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-42: Particular requirements ...

  EN 60335-2-43:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements ...

  EN 60335-2-43:2003/A1:2006

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements ...

  EN 60335-2-44:2002/A1:2008

Household and similar electrical appliances - Safety - Part 2-44: Particular requirements ...

  EN 60335-2-44:2002/A2:2012

Household and similar electrical appliances - Safety - Part 2-44: Particular requirements ...

  EN 60335-2-45:2002/A2:2012

Household and similar electrical appliances - Safety - Part 2-45: Particular requirements ...

  EN 60335-2-45:2002/A1:2008

Household and similar electrical appliances - Safety - Part 2-45: Particular requirements ...

  EN 60335-2-47:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-48:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-49:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-50:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-50: Particular requirements ...

  EN 60335-2-51:2003/A2:2012

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements ...

  EN 60335-2-51:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-51: Particular requirements ...

  EN 60335-2-52:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements ...

  EN 60335-2-54:2008/A1:2015

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements ...

  EN 60335-2-55:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-55: Particular requirements ...

  EN 60335-2-56:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-56: Particular requirements ...

  EN 60335-2-56:2003/A2:2014

Household and similar electrical appliances - Safety - Part 2-56: Particular requirements ...

  EN 60335-2-59:2003/A2:2009

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements ...

  EN 60335-2-59:2003/A1:2006

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements ...

  EN 60335-2-60:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-60: Particular requirements ...

  EN 60335-2-60:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-60: Particular requirements ...

  EN 60335-2-61:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-61: Particular requirements ...

  EN 60335-2-61:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-61: Particular requirements ...

  EN 60335-2-62:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-62: Particular requirements ...

  EN 60335-2-65:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-65: Particular requirements ...

  EN 60335-2-66:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-66: Particular requirements ...

  EN 60335-2-66:2003/A2:2012

Household and similar electrical appliances - Safety - Part 2-66: Particular requirements ...

  EN 60335-2-71:2003/A1:2007

Household and similar electrical appliances - Safety - Part 2-71: Particular requirements ...

  EN 60335-2-73:2003/A2:2009

Household and similar electrical appliances - Safety - Part 2-73: Particular requirements ...

  EN 60335-2-73:2003/A1:2006

Household and similar electrical appliances - Safety - Part 2-73: Particular requirements ...

  EN 60335-2-74:2003/A1:2006

Household and similar electrical appliances - Safety - Part 2-74: Particular requirements ...

  EN 60335-2-74:2003/A2:2009

Household and similar electrical appliances - Safety - Part 2-74: Particular requirements ...

  EN 60335-2-75:2004/A2:2008

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements ...

  EN 60335-2-75:2004/A1:2005

Household and similar electrical appliances - Safety - Part 2-75: Particular requirements ...

  EN 60335-2-78:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-78: Particular requirements ...

  EN 60335-2-80:2003/A2:2009

+6Household and similar electrical appliances - Safety - Part 2-80: Particular requirement...

  EN 60335-2-80:2003/A1:2004

+6Household and similar electrical appliances - Safety - Part 2-80: Particular requirement...

  EN 60335-2-81:2003/A2:2012

Household and similar electrical appliances - Safety - Part 2-81: Particular requirements ...

  EN 60335-2-81:2003/A1:2007

Household and similar electrical appliances - Safety - Part 2-81: Particular requirements ...

  EN 60335-2-82:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-82: Particular requirements ...

  EN 60335-2-83:2002/A1:2008

Household and similar electrical appliances - Safety - Part 2-83: Particular requirements ...

  EN 60335-2-84:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements ...

  EN 60335-2-85:2003/A1:2008

Household and similar electrical appliances - Safety - Part 2-85: Particular requirements ...

  EN 60335-2-86:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements ...

  EN 60335-2-86:2003/A2:2016

Household and similar electrical appliances - Safety - Part 2-86: Particular requirements ...

  EN 60335-2-87:2002/A1:2007

Household and similar electrical appliances - Safety - Part 2-87: Particular requirements ...

  EN 60335-2-90:2006/A1:2010

Household and similar electrical appliances - Safety - Part 2-90: Particular requirements ...

  EN 60335-2-96:2002/A2:2009

Household and similar electrical appliances - Safety - Part 2-96: Particular requirements ...

  EN 60335-2-96:2002/A1:2004

Household and similar electrical appliances - Safety - Part 2-96: Particular requirements ...

  EN 60335-2-97:2006/A2:2010

Household and similar electrical appliances - Safety - Part 2-97: Particular requirements ...

  EN 60335-2-98:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements ...

  EN 60335-2-98:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements ...

  EN 60335-2-101:2002/A1:2008

Household and similar electrical appliances - Safety - Part 2-101: Particular requirements...

  EN 60335-2-101:2002/A2:2014

Household and similar electrical appliances - Safety - Part 2-101: Particular requirements...

  EN 60335-2-105:2005/A1:2008

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements...

  EN 60399:2004/A1:2008

Barrel thread for lampholders with shade holder ring

  EN 60400:2017

Lampholders for tubular fluorescent lamps and starterholders

  EN 60432-1:2000/A1:2005

Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic ...

  EN 60432-1:2000/A2:2012

Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic ...

  EN 60432-2:2000/A1:2005

Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic a...

  EN 60432-2:2000/A2:2012

Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic a...

  EN 60477:1997/A1:1997

Laboratory d.c. resistors

  EN 60477-2:1997/A1:1997

Laboratory resistors - Part 2: Laboratory a.c. resistors

  EN 60523:1993/A2:1997

Direct-current potentiometers

  EN 60524:1993/A2:1997

Direct-current resistive volt ratio boxes

  EN 60529:1991/A2:2013

Degrees of protection provided by enclosures (IP Code)

  EN 60529:1991/A1:2000

Degrees of protection provided by enclosures (IP Code)

  EN 60564:1993/A2:1997

D.C. bridges for measuring resistance

  EN 60570:2003/A1:2018

Electrical supply track systems for luminaires

  EN 60598-1:2015/A1:2018

Luminaires - Part 1: General requirements and tests

  EN 60598-1:2015/AC:2017-05

Luminaires - Part 1: General requirements and tests

  EN 60598-2-3:2003/A1:2011

Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting

  EN 60598-2-4:2018

Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminai...

  EN 60598-2-9:1989/A1:1994

Luminaires - Part 2: Particular requirements - Section 9: Photo and film luminaires (non-p...

  EN 60598-2-13:2006/A1:2012

Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

  EN IEC 60598-2-17:2018

Luminaires - Part 2-17: Particular requirements - Luminaires for stage lighting, televisio...

  EN 60598-2-19:1989/A2:1998

Luminaires - Part 2: Particular requirements - Section 19: Air-handling luminaires (safety...

  EN 60598-2-20:2015/AC:2017-01

Luminaires - Part 2-20: Particular requirements - Lighting chains

  EN 60598-2-21:2015/AC:2017-01

Luminaires - Part 2-21: Particular requirements - Rope lights

  EN 60598-2-23:1996/A1:2000

Luminaires - Part 2-23: Particular requirements - Extra low-voltage lighting systems for f...

  EN 60598-2-25:1994/A1:2004

Luminaires - Part 2-25: Particular requirements - Luminaires for use in clinical areas of ...

  EN 60618:1997/A2:1997

Inductive voltage dividers

  EN 60669-1:2018

Switches for household and similar fixed electrical installations - Part 1: General requir...

  EN 60669-2-1:2004/A1:2009

Switches for household and similar fixed electrical installations - Part 2-1: Particular r...

  EN 60670-1:2005/A1:2013

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN 60691:2003/A1:2007

Thermal-links - Requirements and application guide

  EN 60691:2003/A2:2010

Thermal-links - Requirements and application guide

  EN 60702-1:2002/A1:2015

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V -...

  EN 60702-2:2002/A1:2015

Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V -...

  EN 60730-1:1995/A2:1998

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-1:1995/A1:1997

Automatic electrical controls for household and similar use - Part 1: General requirements...

  EN 60730-2-2:2002/A1:2006

Automatic electrical controls for household and similar use - Part 2-2: Particular require...

  EN 60730-2-8:2002/A1:2003

Automatic electrical controls for household and similar use - Part 2-8: Particular require...

  EN 60730-2-14:1997/A1:2001

Automatic electrical controls for household and similar use - Part 2-14: Particular requir...

  EN 60730-2-14:1997/A2:2008

Automatic electrical controls for household and similar use - Part 2-14: Particular requir...

  EN 60730-2-19:2002/A2:2008

Automatic electrical controls for household and similar use - Part 2-19: Particular requir...

  EN 60825-2:2004/A1:2007

Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)

  EN 60825-2:2004/A2:2010

Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS)

  EN 60825-4:2006/A1:2008

Safety of laser products - Part 4: Laser guards

  EN 60825-4:2006/A2:2011

Safety of laser products - Part 4: Laser guards

  EN 60838-1:2004/A1:2008

Miscellaneous lampholders - Part 1: General requirements and tests

  EN 60838-1:2004/A2:2011

Miscellaneous lampholders - Part 1: General requirements and tests

  EN 60838-2-1:1996/A1:1998

Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

  EN 60838-2-1:1996/A2:2004 2-1:1994/A2:2004

Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14IE...

  EN 60838-2-2:2006/A1:2012

Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for LED-modules

  EN 60898-1:2003/A1:2004

Electrical accessories - Circuit breakers for overcurrent protection for household and sim...

  EN 60931-1:1996/A1:2003

Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltag...

  EN 60934:2001/A1:2007

Circuit-breakers for equipment (CBE)

  EN 60934:2001/A2:2013

Circuit-breakers for equipment (CBE)

  EN 60947-1:2007/A2:2014

Low-voltage switchgear and controlgear - Part 1: General rules

  EN 60947-1:2007/A1:2011

Low-voltage switchgear and controlgear - Part 1: General rules

  EN 60947-2:2006/A1:2009

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60947-2:2006/A2:2013

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60947-3:2009/A2:2015

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnec...

  EN 60947-4-1:2010/A1:2012

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electro...

  EN 60947-5-1:2004/A1:2009

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-2:2007/A1:2012

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching e...

  EN 60947-5-5:1997/A1:2005

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 60947-6-1:2005/A1:2014

Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer ...

  EN 60947-6-2:2003/A1:2007

Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control a...

  EN 60947-8:2003/A2:2012

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protec...

  EN 60947-8:2003/A1:2006

Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protec...

  EN 61008-1:2012/A1:2014

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2012/A2:2014

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61009-1:2012/A2:2014

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2012/A1:2014

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61028:1993/A2:1997

Electrical measuring instruments - X-Y recorders

  EN 61034-1:2005/A1:2014

Measurement of smoke density of cables burning under defined conditions - Part 1: Test app...

  EN 61034-2:2005/A1:2013

Measurement of smoke density of cables burning under defined conditions - Part 2: Test pro...

  EN 61048:2006/A1:2016

Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp...

  EN 61050:1992/A1:1995

Transformers for tubular discharge lamps having a no-load output voltage exceeding 1 kV (g...

  EN 61058-1:2002/A2:2008

Switches for appliances - Part 1: General requirements

  EN 61140:2002/A1:2006

Protection against electric shock - Common aspects for installation and equipment

  EN 61143-1:1994/A1:1997

Electrical measuring instruments - X-t recorders - Part 1: Definitions and requirements

  EN 61184:2017

Bayonet lampholders

  EN 61195:1999/A1:2013

Double-capped fluorescent lamps - Safety specifications

  EN 61195:1999/A2:2015

Double-capped fluorescent lamps - Safety specifications

  EN 61199:2011/A1:2013

Single-capped fluorescent lamps - Safety specifications

  EN 61199:2011/A2:2015

Single-capped fluorescent lamps - Safety specifications

  EN IEC 61204-7:2018

Low-voltage switch mode power supplies - Part 7: Safety requirements

  EN 61242:1997/A1:2008

Electrical accessories - Cable reels for household and similar purposes

  EN 61242:1997/A2:2016

Electrical accessories - Cable reels for household and similar purposes

  EN 61347-2-8:2001/A1:2006 2-8:2000/A1:2006

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lampsIEC...

  EN 61347-2-10:2001/A1:2009

Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convert...

  EN 61347-2-12:2005/A1:2010

Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic...

  EN 61534-1:2011/A1:2014

Powertrack systems - Part 1: General requirements

  EN 61535:2009/A1:2013

Installation couplers intended for permanent connection in fixed installations

  EN 61549:2003/A1:2005

Miscellaneous lamps

  EN 61549:2003/A3:2012

Miscellaneous lamps

  EN 61549:2003/A2:2010

Miscellaneous lamps

  EN 61558-1:2005/A1:2009

Safety of power transformers, power supplies, reactors and similar products - Part 1: Gene...

  EN 61558-2-16:2009/A1:2013

Safety of transformers, reactors, power supply units and similar products for supply volta...

  EN 61643-21:2001/A1:2009

Low voltage surge protective devices - Part 21: Surge protective devices connected to tele...

  EN 61643-21:2001/A2:2013

Low voltage surge protective devices - Part 21: Surge protective devices connected to tele...

  EN IEC 61730-1:2018

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

  EN IEC 61730-1:2018/AC:2018-06

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

  EN IEC 61730-2:2018

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

  EN IEC 61730-2:2018/AC:2018-06

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

  EN 62020:1998/A1:2005

Electrical accessories - Residual current monitors for household and similar uses (RCMs)

  EN 62031:2008/A2:2015

LED modules for general lighting - Safety specifications

  EN 62031:2008/A1:2013

LED modules for general lighting - Safety specifications

  EN 62040-1:2008/A1:2013

Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS

  EN 62560:2012/A1:2015

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specific...

  EN 62949:2017

Particular safety requirements for equipment to be connected to information and communicat...

  EN IEC 63044-3:2018

Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (B...

  EN 1010-1:2004+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-2:2006+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 12581:2005+A1:2010

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating...

  EN 12621:2006+A1:2010

Machinery for the supply and circulation of coating materials under pressure - Safety requ...

  EN 12757-1:2005+A1:2010

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery fo...

  EN 14034-1:2004+A1:2011

Determination of explosion characteristics of dust clouds - Part 1: Determination of the m...

  EN 14034-2:2006+A1:2011

Determination of explosion characteristics of dust clouds - Part 2: Determination of the m...

  EN 14034-3:2006+A1:2011

Determination of explosion characteristics of dust clouds - Part 3: Determination of the l...

  EN 14034-4:2004+A1:2011

Determination of explosion characteristics of dust clouds - Part 4: Determination of the l...

  EN 14460:2018

Explosion resistant equipment

  EN 14492-1:2006+A1:2009

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-1:2006+A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-2:2006+A1:2009

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14492-2:2006+A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14681:2006+A1:2010

Safety of machinery - Safety requirements for machinery and equipment for production of st...

  EN 17077:2018

Determination of burning behaviour of dust layers

  EN ISO/IEC 80079-38:2016

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in unde...

  EN ISO/IEC 80079-38:2016/A1:2018

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in unde...

  EN 50271:2018

Electrical apparatus for the detection and measurement of combustible gases, toxic gases o...

  EN 60079-18:2015/A1:2017

Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm'

  EN 267:2009+A1:2011

Automatic forced draught burners for liquid fuels

  EN 334:2005+A1:2009

Gas pressure regulators for inlet pressures up to 100 bar

  EN 593:2017

Industrial valves - Metallic butterfly valves for general purposes

  EN 676:2003+A2:2008

Automatic forced draught burners for gaseous fuels

  EN 676:2003+A2:2008/AC:2008

Automatic forced draught burners for gaseous fuels

  EN 1057:2006+A1:2010

Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and ...

  EN 1092-1:2018

Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, P...

  EN 10213:2007+A1:2016

Steel castings for pressure purposes

  EN 12953-4:2018

Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler

  EN 13445-2:2014/A2:2018

Unfired pressure vessels - Part 2: Materials

  EN 13445-3:2014/A4:2018

Unfired pressure vessels - Part 3: Design

  EN 14276-1:2006+A1:2011

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General re...

  EN 14276-2:2007+A1:2011

Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General req...

  EN 14359:2006+A1:2010

Gas-loaded accumulators for fluid power applications

  EN 14382:2005+A1:2009

Safety devices for gas pressure regulating stations and installations - Gas safety shut-of...

  EN 14382:2005+A1:2009/AC:2009

Safety devices for gas pressure regulating stations and installations - Gas safety shut-of...

  EN 14394:2005+A1:2008

Heating boilers - Heating boilers with forced draught burners - Nominal heat output not ex...

  EN 14917:2009+A1:2012

Metal bellows expansion joints for pressure applications

  EN 15776:2011+A1:2015

Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels...

  EN 16668:2016+A1:2018

Industrial valves - Requirements and testing for metallic valves as pressure accessories

  EN 10207:2017

Steels for simple pressure vessels - Technical delivery requirements for plates, strips an...

  EN 71-1:2014+A1:2018

Safety of toys - Part 1: Mechanical and physical properties

  EN 71-2:2011+A1:2014

Safety of toys - Part 2: Flammability

  EN 71-3:2013+A3:2018

Safety of toys - Part 3: Migration of certain elements

  EN 71-7:2014+A2:2018

Safety of toys - Part 7: Finger paints - Requirements and test methods

  EN 71-8:2018

Safety of toys - Part 8: Activity toys for domestic use

  EN 71-14:2014+A1:2017

Safety of toys - Part 14: Trampolines for domestic use

  EN 62115:2005/A2:2011

Electric toys - Safety

  EN IEC 60079-0:2018

Explosive atmospheres - Part 0: Equipment - General requirements

  EN 71-3:2019

Safety of toys - Part 3: Migration of certain elements

  EN 71-14:2018

Safety of toys - Part 14: Trampolines for domestic use

  EN ISO 13766-1:2018

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of ...

  EN 55035:2017

Electromagnetic compatibility of multimedia equipment - Immunity requirements

  EN 61000-6-5:2015/AC:2018-01

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment...

  EN IEC 61058-1:2018

Switches for appliances - Part 1: General requirements

  EN 63024:2018

Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs ...

  EN 1562:2019

Founding - Malleable cast irons

  EN 1563:2018

Founding - Spheroidal graphite cast irons

  EN ISO 4126-2:2019

Safety devices for protection against excessive pressure - Part 2: Bursting disc safety de...

  EN 12516-1:2014+A1:2018

Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shel...

  EN 12516-4:2014+A1:2018

Industrial valves - Shell design strength - Part 4: Calculation method for valve shells ma...

  EN 13136:2013+A1:2018

Refrigerating systems and heat pumps - Pressure relief devices and their associated piping...

  EN 13445-2:2014/A3:2018

Unfired pressure vessels - Part 2: Materials

  EN 13445-3:2014/A5:2018

Unfired pressure vessels - Part 3: Design

  EN 13445-3:2014/A6:2019

Unfired pressure vessels - Part 3: Design

  EN 13445-5:2014/A1:2018

Unfired pressure vessels - Part 5: Inspection and testing

  EN 13445-6:2014/A2:2018

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure...

  EN 13480-2:2017/A1:2018

Metallic industrial piping - Part 2: Materials

  EN 13480-2:2017/A2:2018

Metallic industrial piping - Part 2: Materials

  EN 13480-2:2017/A3:2018

Metallic industrial piping - Part 2: Materials

  EN 13480-5:2017/A1:2019

Metallic industrial piping - Part 5: Inspection and testing

  EN ISO 15494:2018

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE), ...

  EN ISO 21028-2:2018

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2...

  EN 60204-1:2018

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN 60335-1:2012/A13:2017

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-2-4:2010/A11:2018

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements f...

  EN 60335-2-15:2016

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2016/A11:2018

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-16:2003/A11:2018

Household and similar electrical appliances - Safety - Part 2-16: Particular requirements ...

  EN 60335-2-28:2003/A11:2018

Household and similar electrical appliances - Safety - Part 2-28: Particular requirements ...

  EN 60335-2-29:2004/A11:2018

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements ...

  EN 60335-2-55:2003/A11:2018

Household and similar electrical appliances - Safety - Part 2-55: Particular requirements ...

  EN 60335-2-59:2003/A11:2018

Household and similar electrical appliances - Safety - Part 2-59: Particular requirements ...

  EN 60335-2-74:2003/A11:2018

Household and similar electrical appliances - Safety - Part 2-74: Particular requirements ...

  EN 60335-2-85:2003/A11:2018

Household and similar electrical appliances - Safety - Part 2-85: Particular requirements ...

  EN 60335-2-109:2010/A1:2018

Household and similar electrical appliances - Safety - Part 2-109: Particular requirements...

  EN 60335-2-109:2010/A2:2018

Household and similar electrical appliances - Safety - Part 2-109: Particular requirements...

  EN 60529:1991/AC:2016-12

Degrees of protection provided by enclosures (IP Code)

  EN 60529:1991/A2 :2013/AC:2019-02

Degrees of protection provided by enclosures (IP Code)

  EN 60598-2-22:2014/AC:2016-05

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-22:2014/AC:2016-09

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60715:2017

Dimensions of low-voltage switchgear and controlgear - Standardized mounting on rails for ...

  EN 60898-1:2019

Electrical accessories - Circuit-breakers for overcurrent protection for household and sim...

  EN 60947-2:2017

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60947-5-1:2017

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60947-5-5:1997/A2:2017

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 61008-1:2012/A1:2014/AC:2016-06

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2012/A12:2017

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN IEC 61010-2-201:2018

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61058-1:2018

Switches for appliances - Part 1: General requirements

  EN 61643-11:2012/A11:2018

Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-...

  EN 61851-23:2014/AC:2016-06

Electric vehicle conductive charging system - Part 23: DC electric vehicle charging statio...

  EN 62560:2012/A11:2019

Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specific...

  EN 62606:2013/A1:2017

General requirements for arc fault detection devices

  EN 63024:2018

Requirements for automatic reclosing devices (ARDs) for circuit-breakers, RCBOs and RCCBs ...

  EN ISO 14118:2018

Safety of machinery - Prevention of unexpected start-up (ISO 14118:2017)

  EN 1853:2017

Agricultural machinery - Trailers - Safety

  EN 1870-6:2017

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machin...

  EN ISO 4254-5:2018

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2...

  EN ISO 4254-7:2017

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton ha...

  EN ISO 4254-8:2018

Agricultural machinery - Safety - Part 8: Solid fertilizer distributors (ISO 4254-8:2018)

  EN ISO 5395-1:2013/A1:2018

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 1: ...

  EN ISO 5395-3:2013/A2:2018

Garden equipment - Safety requirements for combustion-engine-powered lawnmowers - Part 3: ...

  EN 12013:2018

Plastics and rubber machines - Internal mixers - Safety requirements

  EN 12999:2011+A2:2018

Cranes - Loader cranes

  EN 13001-3-1:2012+A2:2018

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

  EN 13001-3-6:2018

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hy...

  EN 13135:2013+A1:2018

Cranes - Safety - Design - Requirements for equipment

  EN 13684:2018

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

  EN ISO 13766-2:2018

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of ...

  EN 15194:2017

Cycles - Electrically power assisted cycles - EPAC Bicycles

  EN 15895:2011+A1:2018

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

  EN ISO 16092-1:2018

Machine tools safety - Presses - Part 1: General safety requirements (ISO 16092-1:2017)

  EN ISO 16092-3:2018

Machine tools safety - Presses - Part 3: Safety requirements for hydraulic presses (ISO 16...

  EN 16719:2018

Transport platforms

  EN 16952:2018

Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - S...

  EN 17059:2018

Plating and anodizing lines - Safety requirements

  EN ISO 19085-4:2018

Woodworking machines - Safety - Part 4: Vertical panel circular sawing machines (ISO 19085...

  EN ISO 19085-6:2017

Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupie...

  EN ISO 19085-8:2018

Woodworking machines - Safety - Part 8: Belt sanding and calibrating machines for straight...

  EN ISO 19225:2017

Underground mining machines - Mobile extracting machines at the face - Safety requirements...

  EN ISO 28927-2:2009/A1:2017

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO/IEC 80079-38:2016

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in unde...

  EN ISO/IEC 80079-38:2016/A1:2018

Explosive atmospheres - Part 38: Equipment and components in explosive atmospheres in unde...

  EN 50569:2013/A1:2018

Household and similar electrical appliances - Safety - Particular requirements for commerc...

  EN 50570:2013/A1:2018

Household and similar electrical appliances - Safety - Particular requirements for commerc...

  EN 50571:2013/A1:2018

Household and similar electrical appliances - Safety - Particular requirements for commerc...

  EN 50636-2-107:2015/A1:2018

Safety of household and similar appliances - Part 2-107: Particular requirements for robot...

  EN 60335-1:2012/A13:2017

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-2-58:2005

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements ...

  EN 60335-2-58:2005/A2:2015

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements ...

  EN 60335-2-58:2005/A12:2016

Household and similar electrical appliances - Safety - Part 2-58: Particular requirements ...

  EN 62841-2-1:2018

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-17:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-1:2014/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-4:2016/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-4:2016

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-6:2014/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-9:2015/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-10:2015/A11:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-14:2017

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 474-1:2006+A5:2018

Earth-moving machinery - Safety - Part 1: General requirements

  EN 13241:2003+A2:2016

Industrial, commercial, garage doors and gates - Product standard, performance characteris...

  EN ISO 19085-3:2017

Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring an...

  EN 1037:1995+A1:2008

Safety of machinery - Prevention of unexpected start-up

  EN 1853:1999+A1:2009

Agricultural machinery - Trailers with tipping body Safety

  EN 1870-6:2002+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machin...

  EN 14017:2005+A2:2009

Agricultural and forestry machinery - Solid fertilizer distributors Safety

  EN 12013:2000+A1:2008

Plastics and rubber machines - Internal mixers - Safety requirements

  EN 12999:2011+A1:2012

Cranes - Loader cranes

  EN 13001-3-1:2012+A1:2013

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

  EN 13684:2004+A3:2009

Garden equipment - Pedestrian controlled lawn aerators and scarifiers Safety

  EN 692:2005+A1:2009

Machine tools - Mechanical presses - Safety

  EN 693:2001+A2:2011

Machine tools - Safety - Hydraulic presse

  EN 13736:2003+A1:2009

Safety of machine tools - Pneumatic presses

  EN 848-1:2007+A2:2012

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: S...

  EN 786:1996+A2:2009

Garden equipment - Electrically powered walk- behind and hand-held lawn trimmers and lawn ...

  EN 1870-14:2007+A2:2012

Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing...

  EN 300 328 V2.2.2

Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz band; ...

  EN 300 674-2-2 V2.2.1

Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmi...

  EN 303 098 V2.2.1

Maritime low power personal locating devices employing AIS; Harmonised Standard for access...

  EN 300 698 V2.3.1

Radio telephone transmitters and receivers for the maritime mobile service operating in th...

  EN 303 520 V1.2.1

Short Range Devices (SRD); Ultra Low Power (ULP) wireless medical capsule endoscopy device...

  EN 1127-1:2019

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and m...

  EN 285:2006+A2:2009

Sterilization - Steam sterilizers - Large sterilizers

  EN 455-2:2009+A2:2013

Medical gloves for single use - Part 2: Requirements and testing for physical properties

  EN 794-3:1998+A2:2009

Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators

  EN 1060-3:1997+A2:2009

Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical...

  EN 1282-2:2005+A1:2009

Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified)

  EN 1422:1997+A1:2009

Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test meth...

  EN 1782:1998+A1:2009

Tracheal tubes and connectors

  EN 1789:2007+A1:2010

Medical vehicles and their equipment - Road ambulances

  EN 1820:2005+A1:2009

Anaesthetic reservoir bags (ISO 5362:2000, modified)

  EN 1865-1:2010+A1:2015

Patient handling equipment used in road ambulances - Part 1: General stretcher systems and...

  EN 1865-2:2010+A1:2015

Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher

  EN ISO 10993-11:2018

Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993...

  EN ISO 11137-1:2015/A2:2019

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11608-7:2017

Needle-based injection systems for medical use - Requirements and test methods - Part 7: A...

  EN ISO 11990:2018

Lasers and laser-related equipment - Determination of laser resistance of tracheal tube sh...

  EN 12006-2:1998+A1:2009

Non active surgical implants - Particular requirements for cardiac and vascular implants -...

  EN 12006-3:1998+A1:2009

Non active surgical implants - Particular requirements for cardiac and vascular implants -...

  EN 12342:1998+A1:2009

Breathing tubes intended for use with anaesthetic apparatus and ventilators

  EN 12470-1:2000+A1:2009

Clinical thermometers - Part 1: Metallic liquid- in-glass thermometers with maximum device

  EN 12470-2:2000+A1:2009

Clinical thermometers - Part 2: Phase change type (dot matrix) thermometers

  EN 12470-3:2000+A1:2009

Clinical thermometers - Part 3: Performance of compact electrical thermometers (non-predic...

  EN 12470-4:2000+A1:2009

Clinical thermometers - Part 4: Performance of electrical thermometers for continuous meas...

  EN ISO 13408-2:2018

Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2...

  EN ISO 13485:2016/AC:2018

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN 13544-1:2007+A1:2009

Respiratory therapy equipment - Part 1: Nebulizing systems and their component

  EN 13544-2:2002+A1:2009

Respiratory therapy equipment - Part 2: Tubing and connectors

  EN 13544-3:2001+A1:2009

Respiratory therapy equipment - Part 3: Air entrainment devices

  EN 13795-1:2019

Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and...

  EN 13795-2:2019

Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits

  EN 13867:2002+A1:2009

Concentrates for haemodialysis and related therapies

  EN 13976-2:2018

Rescue systems - Transportation of incubators - Part 2: System requirements

  EN 14180:2003+A2:2009

Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Re...

  EN 14683:2019+AC:2019

Medical face masks - Requirements and test methods

  EN ISO 15747:2019

Plastic containers for intravenous injections (ISO 15747:2018)

  EN ISO 15883-4:2018

Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing che...

  EN ISO 17664:2017

Processing of health care products - Information to be provided by the medical device manu...

  EN ISO 21987:2017

Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2017)

  EN ISO 25424:2019

Sterilization of health care products - Low temperature steam and formaldehyde - Requireme...

  EN ISO 81060-2:2019

Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated ...

  EN ISO 10993-11:2018

Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993...

  EN ISO 11137-1:2015/A2:2019

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 13408-2:2018

Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2...

  EN ISO 13485:2016/AC:2018

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 25424:2019

Sterilization of health care products - Low temperature steam and formaldehyde - Requireme...

  EN ISO 11137-1:2015/A2:2019

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 13408-2:2018

Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2...

  EN ISO 13485:2016/AC:2018

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 25424:2019

Sterilization of health care products - Low temperature steam and formaldehyde - Requireme...

  EN ISO 18497:2018

Agricultural machinery and tractors - Safety of highly automated agricultural machines - P...

  EN ISO 19353:2019

Safety of machinery - Fire prevention and fire protection (ISO 19353:2019)

  EN 707:2018

Agricultural machinery - Slurry tankers - Safety

  EN 1459-2:2015+A1:2018

Rough-terrain trucks - Safety requirements and verification - Part 2: Slewing variable-rea...

  EN ISO 3691-5:2015

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled tr...

  EN ISO 4254-9:2018

Agricultural machinery - Safety - Part 9: Seed drills (ISO 4254-9:2018)

  EN ISO 10517:2019

Powered hand-held hedge trimmers - Safety (ISO 10517:2019)

  EN ISO 11148-13:2018

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools...

  EN 12012-1:2018

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for b...

  EN 12312-8:2018

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance or service...

  EN 12733:2018

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

  EN 14033-4:2019

Railway applications - Track - Railbound construction and maintenance machines - Part 4: T...

  EN 16712-4:2018

Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Po...

  EN 16770:2018

Safety of woodworking machines - Chip and dust extraction systems for indoor installation ...

  EN 16985:2018

Spray booths for organic coating material - Safety requirements

  EN 17067:2018

Forestry machinery - Safety requirements on radio remote controls

  EN ISO 19296:2018

Mining - Mobile machines working underground - Machine safety (ISO 19296:2018)

  EN ISO 28927-4:2010/A1:2018

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN 60204-1:2018

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN IEC 60204-11:2019

Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipme...

  EN 62841-4-2:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-12:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-21:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN ISO 20607:2019

Safety of machinery - Instruction handbook - General drafting principles (ISO 20607:2019)

  EN ISO 19085-7:2019

Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surfa...

  EN 1114-3:2019

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements...

  EN 1127-1:2019

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and m...

  EN 62841-2-1:2018/A11:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 358:2018

Personal protective equipment for work positioning and prevention of falls from a height -...

  EN 388:2016+A1:2018

Protective gloves against mechanical risks

  EN 510:2019

Specification for protective clothing for use where there is a risk of entanglement with m...

  EN 893:2019

Mountaineering equipment - Crampons - Safety requirements and test methods

  EN 943-1:2015+A1:2019

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liqui...

  EN 943-2:2019

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liqui...

  EN 1073-1:2016+A1:2018

Protective clothing against solid airborne particles including radioactive contamination -...

  EN ISO 10819:2013/A1:2019

Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vi...

  EN ISO 11393-2:2019

Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements an...

  EN ISO 11393-4:2019

Protective clothing for users of hand-held chainsaws - Part 4: Performance requirements an...

  EN ISO 11393-5:2019

Protective clothing for users of hand-held chainsaws - Part 5: Performance requirements an...

  EN ISO 11393-6:2019

Protective clothing for users of hand-held chainsaws - Part 6: Performance requirements an...

  EN 12277:2015+A1:2018

Mountaineering equipment - Harnesses - Safety requirements and test methods

  EN 13832-2:2018

Footwear protecting against chemicals - Part 2: Requirements for limited contact with chem...

  EN 13832-3:2018

Footwear protecting against chemicals - Part 3: Requirements for prolonged contact with ch...

  EN 14458:2018

Personal eye-equipment - High performance visors intended only for use with protective hel...

  EN 14594:2018

Respiratory protective devices - Continuous flow compressed air line breathing devices - R...

  EN 50321-1:2018/AC:2018-08

Live working - Footwear for electrical protection - Insulating footwear and overboots

  EN 50321-1:2018

Live working - Footwear for electrical protection - Insulating footwear and overboots

  EN IEC 63000:2018

Technical documentation for the assessment of electrical and electronic products with resp...

  EN IEC 60947-4-1:2019

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electro...

  EN IEC 60947-9-1:2019

Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - A...

  EN 61439-3:2012/AC:2019-04

Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended t...

  EN 12895:2015+A1:2019

Industrial trucks - Electromagnetic compatibility

  EN 60598-2-22:2014/A1:2020

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60947-2:2017/A1:2020

Low-voltage switchgear and controlgear - Part 2: Circuit-breakers

  EN 60669-1:2018/AC:2018-11

Switches for household and similar fixed electrical installations - Part 1: General requir...

  EN 60669-1:2018/AC:2020-02

Switches for household and similar fixed electrical installations - Part 1: General requir...

  EN 60335-2-78:2003/A11:2020

Household and similar electrical appliances - Safety - Part 2-78: Particular requirements ...

  EN 60335-2-82:2003/A2:2020

Household and similar electrical appliances - Safety - Part 2-82: Particular requirements ...

  EN 60335-2-105:2005/A2:2020

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements...

  EN 60570:2003/A2:2020

Electrical supply track systems for luminaires

  EN IEC 60947-5-2:2020

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching e...

  EN IEC 60974-1:2018

Arc welding equipment - Part 1: Welding power sources

  EN IEC 60974-1:2018/A1:2019

Arc welding equipment - Part 1: Welding power sources

  EN 61010-1:2010/A1:2019

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 61010-1:2010/A1:2019/AC:2019-04

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 301 908-1 V13.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduct...

  EN 301 908-3 V13.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 3: CDMA Dire...

  EN 301 908-14 V13.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved ...

  EN 301 908-18 V13.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: E-UTRA, ...

  EN 301 908-2 V13.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 2: CDMA Dire...

  EN 303 213-5-1 V1.1.1

Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 5: Harmonised Standa...

  EN 301 908-13 V13.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved ...

  EN 302 217-2 V3.2.2

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and ant...

  EN 303 213-6-1 V3.1.1

Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 6: Harmonised Standa...

  EN 303 345-2 V1.1.1

Broadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for acc...

  EN 303 345-5 V1.1.1

Broadcast Sound Receivers; Part 5: DRM broadcast sound service; Harmonised Standard for ac...

  EN 303 364-3 V1.1.1

Primary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 3...

  EN 55011:2016

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics...

  EN 55011:2016/A1:2017

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics...

  EN 55011:2016/A11:2020

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics...

  EN 55014-1:2017

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55014-1:2017/A11:2020

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN IEC 55015:2019

Limits and methods of measurement of radio disturbance characteristics of electrical light...

  EN IEC 55015:2019/A11:2020

Limits and methods of measurement of radio disturbance characteristics of electrical light...

  EN 55032:2015

Electromagnetic compatibility of multimedia equipment - Emission Requirements

  EN 55032:2015/A11:2020

Electromagnetic compatibility of multimedia equipment - Emission Requirements

  EN 62026-2:2013/A1:2019

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 2: Act...

  EN 13445-3:2014/A7:2019

Unfired pressure vessels - Part 3: Design

  EN 13445-3:2014/A8:2019

Unfired pressure vessels - Part 3: Design

  EN ISO 4126-1:2013/A2:2019

Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126...

  EN 10217-1:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electri...

  EN 10217-2:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electri...

  EN 10217-3:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electri...

  EN 10217-4:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electri...

  EN 10217-5:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerg...

  EN 10217-6:2019

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerg...

  EN 13480-1:2017/A1:2019

Metallic industrial piping - Part 1: General

  EN 13480-6:2017/A1:2019

Metallic industrial piping - Part 6: Additional requirements for buried piping

  EN 81-20:2020

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-50:2020

Safety rules for the construction and installation of lifts - Examinations and tests - Par...

  EN ISO 19225:2017/A1:2019

Underground mining machines - Mobile extracting machines at the face - Safety requirements...

  EN ISO 3691-5:2015/A1:2020

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled tr...

  EN ISO 3743-2:2019

Acoustics - Determination of sound power levels of noise sources using sound pressure - En...

  EN ISO 11203:2009/A1:2020

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pre...

  EN ISO 13851:2019

Safety of machinery - Two-hand control devices - Principles for design and selection (ISO ...

  EN ISO 13854:2019

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO 13854...

  EN ISO 13857:2019

Safety of machinery - Safety distances to prevent hazard zones being reached by upper and ...

  EN 1612:2019

Plastics and rubber machines - Reaction moulding machines and plants - Safety requirements

  EN ISO 3691-1:2015/A1:2020

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industri...

  EN ISO 4254-11:2010/A1:2020

Agricultural machinery - Safety - Part 11: Pick-up balers (ISO 4254-11:2010)

  EN ISO 5010:2019

Earth-moving machinery - Wheeled machines - Steering requirements (ISO 5010:2019)

  EN ISO 7096:2020

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)

  EN 12301:2019

Plastics and rubber machines - Calenders - Safety requirements

  EN 12965:2019

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts an...

  EN 13525:2020

Forestry machinery - Wood chippers - Safety

  EN ISO 19085-9:2020

Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding tab...

  EN ISO 19085-11:2020

Woodworking machines - Safety - Part 11: Combined machines (ISO 19085-11:2020)

  EN ISO 19085-13:2020

Woodworking machines - Safety - Part 13: Multi-blade rip sawing machines with manual loadi...

  EN ISO 19432-1:2020

Building construction machinery and equipment - Portable, hand-held, internal combustion e...

  EN ISO 20361:2019

Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:201...

  EN ISO 20361:2019/A11:2020

Liquid pumps and pumps units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:201...

  EN ISO 21904-1:2020

Health and safety in welding and allied processes - Equipment for capture and separation o...

  EN 62745:2017

Safety of machinery - Requirements for cableless control systems of machinery

  EN 62745:2017/A11:2020

Safety of machinery - Requirements for cableless control systems of machinery

  EN 50636-2-107:2015/A2:2020

Safety of household and similar appliances - Part 2-107: Particular requirements for robot...

  EN 62841-2-11:2016/A1:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-4:2016/A12:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-4:2016/A1:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-3-9:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-3-9:2020/A11:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-4-1:2020

Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery...

  EN 55035:2017/A11:2020

Electromagnetic compatibility of multimedia equipment - Immunity requirements

  EN IEC 60947-5-2:2020

Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching e...

  EN 60335-1:2012/A1:2019

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2012/A2:2019

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2012/A14:2019

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-2-4:2010/A2:2019

Household and similar electrical appliances - Safety - Part 2-4: Particular requirements f...

  EN 50620:2017

Electric cables - Charging cables for electric vehicles

  EN 50620:2017/A1:2019

Electric cables - Charging cables for electric vehicles

  EN 60335-2-5:2015/A11:2019

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-7:2010/A2:2019

Household and similar electrical appliances - Safety - Part 2-7: Particular requirements f...

  EN 60335-2-12:2003/A2:2019

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements ...

  EN 60335-2-12:2003/A11:2019

Household and similar electrical appliances - Safety - Part 2-12: Particular requirements ...

  EN 60335-2-13:2010/A1:2019

Household and similar electrical appliances - Safety - Part 2-13: Particular requirements ...

  EN 60335-2-17:2013/A11:2019

Household and similar electrical appliances - Safety - Part 2-17: Particular requirements ...

  EN 60335-2-35:2016/A1:2019

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements ...

  EN 60335-2-47:2003/A2:2019

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements ...

  EN 60335-2-48:2003/A2:2019

Household and similar electrical appliances - Safety - Part 2-48: Particular requirements ...

  EN 60335-2-49:2003/A2:2019

Household and similar electrical appliances - Safety - Part 2-49: Particular requirements ...

  EN 60335-2-52:2003/A12:2019

Household and similar electrical appliances - Safety - Part 2-52: Particular requirements ...

  EN 60335-2-61:2003/A11:2019

Household and similar electrical appliances - Safety - Part 2-61: Particular requirements ...

  EN 60335-2-66:2003/A11:2019

Household and similar electrical appliances - Safety - Part 2-66: Particular requirements ...

  EN 60335-2-84:2003/A2:2019

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements ...

  EN 60335-2-87:2002/A2:2019

Household and similar electrical appliances - Safety - Part 2-87: Particular requirements ...

  EN 60335-2-98:2003/A11:2019

Household and similar electrical appliances - Safety - Part 2-98: Particular requirements ...

  EN 60691:2016

Thermal-links - Requirements and application guide

  EN 60691:2016/A1:2019

Thermal-links - Requirements and application guide

  EN 60728-11:2017

Cable networks for television signals, sound signals and interactive services - Part 11: S...

  EN 60728-11:2017/A11:2018

Cable networks for television signals, sound signals and interactive services - Part 11: S...

  EN IEC 60934:2019

Circuit breakers for equipment (CBE)

  EN 60947-5-4:2003/A1:2019

Low-voltage switchgear and controlgear - Part 5-4: Control circuit devices and switching e...

  EN IEC 60947-9-1:2019

Low-voltage switchgear and controlgear - Part 9-1: Active arc-fault mitigation systems - A...

  EN IEC 60974-2:2019

Arc welding equipment - Part 2: Liquid cooling systems

  EN IEC 60974-3:2019

Arc welding equipment - Part 3: Arc striking and stabilizing devices

  EN IEC 60974-5:2019

Arc welding equipment - Part 5: Wire feeders

  EN IEC 60974-7:2019

Arc welding equipment - Part 7: Torches

  EN 61347-2-7:2012/A1:2019

Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic contr...

  EN 61347-2-11:2001/A1:2019

Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuit...

  EN 61386-1:2008/A1:2019

Conduit systems for cable management - Part 1: General requirements

  EN 61439-3:2012/AC:2019-04

Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended t...

  EN IEC 61535:2019

Installation couplers intended for permanent connection in fixed installations

  EN 61557-9:2015/AC:2017-02

Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. ...

  EN IEC 61558-1:2019

Safety of transformers, reactors, power supply units and combinations thereof - Part 1: Ge...

  EN 61643-31:2019

Low-voltage surge protective devices - Part 31: Requirements and test methods for SPDs for...

  EN IEC 61851-1:2019

Electric vehicle conductive charging system - Part 1: General requirements

  EN 62026-3:2015/AC:2019-12

Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: Dev...

  EN 62035:2014/A1:2019

Discharge lamps (excluding fluorescent lamps) - Safety specifications

  EN IEC 62275:2019

Cable management systems - Cable ties for electrical installations

  EN ISO 11737-2:2020

Sterilization of health care products - Microbiological methods - Part 2: Tests of sterili...

  EN ISO 11607-1:2020

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, ...

  EN ISO 11607-2:2020

Packaging for terminally sterilized medical devices - Part 2: Validation requirements for ...

  EN ISO 10993-16:2017

Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degrada...

  EN ISO 10993-18:2020

Biological evaluation of medical devices - Part 18: Chemical characterization of medical d...

  EN ISO 11607-1:2020

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, ...

  EN ISO 14155:2020

Clinical investigation of medical devices for human subjects - Good clinical practice (ISO...

  EN ISO 11607-2:2020

Packaging for terminally sterilized medical devices - Part 2: Validation requirements for ...

  EN 1789:2020

Medical vehicles and their equipment - Road ambulances

  EN ISO 10993-16:2017

Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degrada...

  EN ISO 10993-18:2020

Biological evaluation of medical devices - Part 18: Chemical characterization of medical d...

  EN ISO 11607-1:2020

Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, ...

  EN ISO 11607-2:2020

Packaging for terminally sterilized medical devices - Part 2: Validation requirements for ...

  EN ISO 11737-2:2020

Sterilization of health care products - Microbiological methods - Part 2: Tests of sterili...

  EN ISO 14155:2020

Clinical investigation of medical devices for human subjects - Good clinical practice (ISO...

  EN ISO 14607:2018

Non-active surgical implants - Mammary implants - Particular requirements (ISO 14607:2018,...

  EN ISO 22442-1:2020

Medical devices utilizing animal tissues and their derivatives - Part 1: Application of ri...

  EN ISO 22442-2:2020

Medical devices utilizing animal tissues and their derivatives - Part 2: Controls on sourc...

  EN IEC 60118-13:2020

Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for ele...

  EN 60601-2-4:2011

Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and ...

  EN ISO 5361:2016

Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016)

  EN IEC 60601-2-66:2020

Medical electrical equipment - Part 2-66: Particular requirements for the basic safety and...

  EN IEC 60601-2-83:2020

Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and...

  EN ISO 80601-2-55:2018

Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and...

  EN 13480-2:2017/A7:2020

Metallic industrial piping - Part 2: Materials

  EN ISO 4126-3:2020

Safety devices for protection against excessive pressure - Part 3: Safety valves and burst...

  EN 12542:2020

LPG equipment and accessories - Static welded steel cylindrical pressure vessels, serially...

  EN 12735-1:2020

Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - ...

  EN 12953-5:2020

Shell boilers - Part 5: Inspection during construction, documentation and marking of press...

  EN 13175:2019+A1:2020

LPG Equipment and accessories - Specification and testing for Liquefied Petroleum Gas (LPG...

  EN 13480-3:2017/A2:2020

Metallic industrial piping - Part 3: Design and calculation

  EN 13480-3:2017/A3:2020

Metallic industrial piping - Part 3: Design and calculation

  EN 14276-1:2020

Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General re...

  EN 14276-2:2020

Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General req...

  EN ISO 15620:2019

Welding - Friction welding of metallic materials (ISO 15620:2019)

  EN ISO 16135:2006/A1:2019

Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)

  EN ISO 16136:2006/A1:2019

Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)

  EN ISO 16137:2006/A1:2019

Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)

  EN ISO 16138:2006/A1:2019

Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)

  EN ISO 16139:2006/A1:2019

Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)

  EN 16767:2020

Industrial valves - Metallic check valves

  EN ISO 21787:2006/A1:2019

Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)

  EN 1149-5:2018

Protective clothing - Electrostatic properties - Part 5: Material performance and design r...

  EN 17092-2:2020

Protective garments for motorcycle riders - Part 2: Class AAA garments - Requirements

  EN 17092-3:2020

Protective garments for motorcycle riders - Part 3: Class AA garments - Requirements

  EN 17092-4:2020

Protective garments for motorcycle riders - Part 4: Class A garments - Requirements

  EN 17092-5:2020

Protective garments for motorcycle riders - Part 5: Class B garments - Requirements

  EN 17092-6:2020

Protective garments for motorcycle riders - Part 6: Class C garments - Requirements

  EN 17109:2020

Mountaineering equipment - Individual safety systems for rope courses - Safety requirement...

  EN 61482-2:2020

Live working - Protective clothing against the thermal hazards of an electric arc - Part 2...

  EN ISO 20320:2020

Protective clothing for use in Snowboarding - Wrist Protectors - Requirements and test met...

  EN 17353:2020

Protective clothing - Enhanced visibility equipment for medium risk situations - Test meth...

  EN 469:2020

Protective clothing for firefighters - Performance requirements for protective clothing fo...

  EN ISO 27065:2017/A1:2019

Protective clothing - Performance requirements for protective clothing worn by operators a...

  EN 15188:2020

Determination of the spontaneous ignition behaviour of dust accumulations

  EN 60335-2-85:2003/A2:2020

Household and similar electrical appliances - Safety - Part 2-85: Particular requirements ...

  EN 60947-5-1:2017/AC:2020-05

Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching e...

  EN 60335-2-17:2013/A1:2020

Household and similar electrical appliances - Safety - Part 2-17: Particular requirements ...

  EN IEC 61010-2-010:2020

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61010-2-081:2020

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61293:2020

Marking of electrical equipment with ratings related to electrical supply - Safety require...

  EN 60335-2-27:2013/A1:2020

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements ...

  EN 60335-2-27:2013/A2:2020

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements ...

  EN 60335-2-3:2016/A1:2020

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements f...

  EN 60335-2-30:2009/A1:2020

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60335-2-30:2009/A12:2020

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60335-2-6:2015/A11:2020

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2015/A1:2020

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-24:2010

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements ...

  EN 60335-2-24:2010/A1:2019

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements ...

  EN 60335-2-24:2010/A2:2019

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements ...

  EN 60335-2-24:2010/A11:2020

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements ...

  EN 60127-3:1996/A2:2003

Miniature fuses - Part 3: Sub-miniature fuse-links

  EN 60664-3:2003/A1:2010

Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating,...

  EN 352-4:2020

Hearing protectors - Safety requirements - Part 4: Level-dependent earmuffs

  EN 352-5:2020

Hearing protectors - Safety requirements - Part 5: Active noise reduction earmuffs

  EN 352-6:2020

Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio inpu...

  EN 352-7:2020

Hearing protectors - Safety requirements - Part 7: Level-dependent earplugs

  EN 352-8:2020

Hearing protectors - Safety requirements - Part 8: Entertainment audio earmuffs

  EN 352-9:2020

Hearing protectors - Safety requirements - Part 9: Earplugs with safety-related audio inpu...

  EN 352-10:2020

Hearing protectors - Safety requirements - Part 10: Entertainment audio earplugs

  EN 352-1:2020

Hearing protectors - General requirements - Part 1: Earmuffs

  EN 352-2:2020

Hearing protectors - General requirements - Part 2: Earplugs

  EN 352-3:2020

Hearing protectors - General requirements - Part 3: Earmuffs attached to head protection a...

  EN 303 204 V3.1.1

Fixed Short Range Devices (SRD) in data networks; Radio equipment to be used in the 870 MH...

  EN 303 276 V1.2.1

Maritime Broadband Radiolink operating within the bands 5 852 MHz to 5 872 MHz and/or 5 88...

  EN 302 066 V2.2.1

Short Range Devices (SRD); Ground- and Wall- Probing Radio determination (GPR/WPR) devices...

  EN 302 208 V3.3.1

Radio Frequency Identification Equipment operating in the band 865 MHz to 868 MHz with pow...

  EN 302 609 V2.2.1

Short Range Devices (SRD); Radio equipment for Euroloop communication systems; Harmonised ...

  EN 303 258 V1.1.1

Wireless Industrial Applications (WIA); Equipment operating in the 5 725 MHz to 5 875 MHz ...

  EN 13852-3:2021

Offshore cranes - Part 3: Light offshore cranes

  EN 71-7:2014+A3:2020

Safety of toys - Part 7: Finger paints - Requirements and test methods

  EN 71-12:2016

Safety of toys - Part 12: N-Nitrosamines and N-nitrosatable substances

  EN IEC 62115:2020

Electric toys - Safety

  EN IEC 62115:2020/A11:2020

Electric toys - Safety

  EN 71-2:2020

Safety of toys - Part 2: Flammability

  EN 71-3:2019+A1:2021

Safety of toys - Part 3: Migration of certain elements

  EN 71-4:2020

Safety of toys - Part 4: Experimental sets for chemistry and related activities

  EN 71-13:2021

Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games

  EN 81-72:2020

Safety rules for the construction and installation of lifts - Particular applications for ...

  EN 81-73:2020

Safety rules for the construction and installation of lifts - Particular applications for ...

  EN 1359:2017

Gas meters - Diaphragm gas meters

  EN 12261:2018

Gas meters - Turbine gas meters

  EN 12405-1:2018

Gas meters - Conversion devices - Part 1: Volume conversion

  EN 14236:2018

Ultrasonic domestic gas meters

  EN 13480-3:2017/A1:2021

Metallic industrial piping - Part 3: Design and calculation

  EN 1515-4:2021

Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to...

  EN 14222:2021

Stainless steel steam boilers

  EN 12999:2020

Cranes - Loader cranes

  EN 1837:2020

Safety of machinery - Integral lighting of machines

  EN ISO 11553-1:2020

Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 1...

  EN ISO 11553-1:2020/A11:2020

Safety of machinery - Laser processing machines - Part 1: Laser safety requirements (ISO 1...

  EN 81-40:2020

Safety rules for the construction and installation of lifts - Special lifts for the transp...

  EN 1175:2020

Safety of industrial trucks - Electrical/electronic requirements

  EN 1459-5:2020

Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface

  EN 1804-1:2020

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1804-2:2020

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1804-3:2020

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1974:2020

Food processing machinery - Slicing machines - Safety and hygiene requirements

  EN 12312-3:2017+A1:2020

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

  EN 12312-7:2020

Aircraft ground support equipment - Specific requirements - Part 7: Aircraft movement equi...

  EN 13586:2020

Cranes - Access

  EN 15011:2020

Cranes - Bridge and gantry cranes

  EN 15571:2020

Machines and plants for mining and tooling of natural stone - Safety - Requirements for su...

  EN ISO 16092-2:2020

Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16...

  EN ISO 16092-4:2020

Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16...

  EN 16307-1:2020

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requireme...

  EN 16486:2014+A1:2020

Machines for compacting waste materials or recyclable fractions - Compactors - Safety requ...

  EN 16564:2020

Machines and plants for mining and tooling of natural stone - Safety - Requirements for br...

  EN 16808:2020

Petroleum, petrochemical and natural gas industries - Safety of machineries - Manual eleva...

  EN 16851:2017+A1:2020

Cranes - Light crane systems

  EN ISO 19085-10:2019

Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-1...

  EN ISO 19085-10:2019/A11:2020

Woodworking machines - Safety - Part 10: Building site saws (contractor saws) (ISO 19085-1...

  EN ISO 20430:2020

Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 2043...

  EN IEC 62841-2-6:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-2-6:2020/A11:2020

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 474-1:2006+A6:2019

Earth-moving machinery - Safety - Part 1: General requirements

  EN 13445-2:2021

Unfired pressure vessels - Part 2: Materials

  EN 13445-3:2021

Unfired pressure vessels - Part 3: Design

  EN 13445-5:2021

Unfired pressure vessels - Part 5: Inspection and testing

  EN 13445-6:2021

Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure...

  EN 10216-5:2021

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stain...

  EN 10217-7:2021

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainle...

  EN 10222-2:2017+A1:2021

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specif...

  EN 10222-4:2017+A1:2021

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof ...

  EN 13445-1:2021

Unfired pressure vessels - Part 1: General

  EN 13445-4:2021

Unfired pressure vessels - Part 4: Fabrication

  EN 13445-8:2021

Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of alumini...

  EN 13445-10:2021

Unfired pressure vessels - Part 10: Additional requirements for pressure vessels of nickel...

  EN 17278:2021

Natural gas vehicles - Vehicle fuelling appliances

  EN 60335-1:2012/A15:2021

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-2-5:2015/A1:2020

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-17:2013/A2:2021

Household and similar electrical appliances - Safety - Part 2-17: Particular requirements ...

  EN IEC 61010-2-202:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 60335-2-43:2020

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements ...

  EN IEC 60335-2-43:2020/A11:2020

Household and similar electrical appliances - Safety - Part 2-43: Particular requirements ...

  EN IEC 60320-2-4:2021

Appliance couplers for household and similar general purposes - Part 2-4: Couplers depende...

  EN IEC 60598-2-23:2021

Luminaires - Part 2-23: Particular requirements - Extra-low-voltage lighting systems for E...

  EN IEC 60947-3:2021

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnec...

  EN IEC 60947-4-1:2019

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electro...

  EN IEC 60947-4-1:2019/AC:2020-05

Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electro...

  EN IEC 62040-1:2019

Uninterruptible power systems (UPS) - Part 1: Safety requirements

  EN IEC 62040-1:2019/A11:2021

Uninterruptible power systems (UPS) - Part 1: Safety requirements

  EN 60825-1:2014/A11:2021

Safety of laser products - Part 1: Equipment classification and requirements

  EN 61800-5-1:2007/A1:2017

Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electric...

  EN 61800-5-1:2007/A11:2021

Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electric...

  EN 62477-1:2012/A1:2017

Safety requirements for power electronic converter systems and equipment - Part 1: General

  EN 62477-1:2012/A12:2021

Safety requirements for power electronic converter systems and equipment - Part 1: General

  EN 60335-2-73:2003/A11:2021

Household and similar electrical appliances - Safety - Part 2-73: Particular requirements ...

  EN 61995-1:2008/A1:2017

Devices for the connection of luminaires for household and similar purposes - Part 1: Gene...

  EN 61995-1:2008/A11:2021

Devices for the connection of luminaires for household and similar purposes - Part 1: Gene...

  EN 62423:2012/A11:2021

Type F and type B residual current operated circuit-breakers with and without integral ove...

  EN 60400:2017/A1:2021

Lampholders for tubular fluorescent lamps and starterholders

  EN IEC 61010-2-130:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 60838-1:2017

Miscellaneous lampholders - Part 1: General requirements and tests

  EN 60838-1:2017/A1:2017

Miscellaneous lampholders - Part 1: General requirements and tests

  EN 60838-1:2017/A2:2021

Miscellaneous lampholders - Part 1: General requirements and tests

  EN 60838-1:2017/A11:2021

Miscellaneous lampholders - Part 1: General requirements and tests

  EN 60335-2-21:2021

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements ...

  EN IEC 60670-1:2021

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN IEC 60670-1:2021/A11:2021

Boxes and enclosures for electrical accessories for household and similar fixed electrical...

  EN IEC 60947-5-8:2021

Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching e...

  EN IEC 60974-11:2021

Arc welding equipment - Part 11: Electrode holders

  EN IEC 60974-13:2021

Arc welding equipment - Part 13: Welding current return clamp

  EN 60947-3:2009/A1:2012

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnec...

  EN ISO 12100-1:2003

Safety of machinery - Basic concepts, general principles for design - Part 1: Basic termin...

  EN ISO 12100-1:2003/A1:2009

Safety of machinery - Basic concepts, general principles for design - Part 1: Basic termin...

  EN ISO 12100-2:2003

Safety of machinery - Basic concepts, general principles for design - Part 2: Technical pr...

  EN ISO 12100-2:2003/A1:2009

Safety of machinery - Basic concepts, general principles for design - Part 2: Technical pr...

  EN ISO 14121-1:2007

Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)

  EN 626-1:1994+A1:2008

Safety of machinery - Reduction of risks to health from hazardous substances emitted by ma...

  EN 626-2:1996+A1:2008

Safety of machinery - Reduction of risk to health from hazardous substances emitted by mac...

  EN 953:1997+A1:2009

Safety of machinery - Guards - General requirements for the design and construction of fix...

  EN 982:1996+A1:2008

Safety of machinery - Safety requirements for fluid power systems and their components - H...

  EN 983:1996+A1:2008

Safety of machinery - Safety requirements for fluid power systems and their components - P...

  EN 999:1998+A1:2008

Safety of machinery - The positioning of protective equipment in respect of approach speed...

  EN 1088:1995+A2:2008

Safety of machinery - Interlocking devices associated with guards - Principles for design ...

  EN 1127-1:2007

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and m...

  EN 1760-1:1997+A1:2009

Safety of machinery - Pressure sensitive protective devices - Part 1: General principles f...

  EN 1760-2:2001+A1:2009

Safety of machinery - Pressure sensitive protective devices - Part 2: General principles f...

  EN 1760-3:2004+A1:2009

Safety of machinery - Pressure sensitive protective devices - Part 3: General principles f...

  EN ISO 3741:2009

Acoustics - Determination of sound power levels of noise sources using sound pressure - Pr...

  EN ISO 3743-1:2009

Acoustics - Determination of sound power levels of noise sources - Engineering methods for...

  EN ISO 3744:2009

Acoustics - Determination of sound power levels of noise sources using sound pressure - En...

  EN ISO 3745:2009

Acoustics - Determination of sound power levels of noise sources using sound pressure - Pr...

  EN ISO 3746:2009

Acoustics - Determination of sound power levels of noise sources using sound pressure - Su...

  EN ISO 3747:2009

Acoustics - Determination of sound power levels of noise sources using sound pressure - Co...

  EN ISO 11145:2008

Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11...

  EN ISO 11200:2009

Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic sta...

  EN ISO 11201:2009

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound press...

  EN ISO 11202:2009

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound press...

  EN ISO 11204:2009

Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound press...

  EN ISO 11252:2008

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation...

  EN ISO 11554:2008

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam po...

  EN 13478:2001+A1:2008

Safety of machinery - Fire prevention and protection

  EN ISO 13849-1:2008

Safety of machinery - Safety-related parts of control systems - Part 1: General principles...

  EN ISO 13849-1:2008/AC:2009

Safety of machinery - Safety-related parts of control systems - Part 1: General principles...

  EN ISO 13849-2:2008

Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO 13...

  EN ISO 13850:2008

Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)

  EN ISO 14122-1:2001

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed mea...

  EN ISO 14122-1:2001/A1:2010

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed mea...

  EN ISO 14122-2:2001

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms a...

  EN ISO 14122-2:2001/A1:2010

Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms a...

  EN ISO 14122-3:2001

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders...

  EN ISO 14122-3:2001/A1:2010

Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders...

  EN ISO 14122-4:2004

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO ...

  EN ISO 14122-4:2004/A1:2010

Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO ...

  EN 30326-1:1994

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: B...

  EN 30326-1:1994/A1:2007

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: B...

  EN 30326-1:1994/A2:2011

Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: B...

  EN 115-1:2008

Safety of escalators and moving walks - Part 1: Construction and installation

  EN 115-1:2008+A1:2010

Safety of escalators and moving walks - Part 1: Construction and installation

  EN 267:2009

Automatic forced draught burners for liquid fuels

  EN 280:2001+A2:2009

Mobile elevating work platforms - Design calculations - Stability criteria - Construction ...

  EN 280:2013

Mobile elevating work platforms - Design calculations - Stability criteria - Construction ...

  EN 289:2004+A1:2008

Plastics and rubber machines - Presses - Safety requirements

  EN 378-2:2008+A1:2009

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Des...

  EN 378-2:2008+A2:2012

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Des...

  EN 415-1:2000+A1:2009

Packaging machines safety - Part 1: Terminology and classification of packaging machines a...

  EN 415-6:2006+A1:2009

Safety of packaging machines - Part 6: Pallet wrapping machines

  EN 453:2000+A1:2009

Food processing machinery - Dough mixers - Safety and hygiene requirements

  EN 454:2000+A1:2009

Food processing machinery - Planetary mixers - Safety and hygiene requirements

  EN 474-1:2006+A1:2009

Earth-moving machinery - Safety - Part 1: General requirements

  EN 474-5:2006+A2:2012

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

  EN 609-1:1999+A2:2009

Agricultural and forestry machinery - Safety of log splitters - Part 1: Wedge splitters

  EN 690:1994+A1:2009

Agricultural machinery - Manure spreaders - Safety

  EN 693:2001+A1:2009

Machine tools - Safety - Hydraulic presses

  EN 704:1999+A1:2009

Agricultural machinery - Pick-up balers - Safety

  EN 709:1997+A2:2009

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary c...

  EN 745:1999+A1:2009

Agricultural machinery - Rotary mowers and flail-mowers - Safety

  EN 791:1995+A1:2009

Drill rigs - Safety

  EN 792-1:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools fo...

  EN 792-2:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimpin...

  EN 792-3:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers

  EN 792-4:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive p...

  EN 792-5:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drill...

  EN 792-6:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools fo...

  EN 792-7:2001+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 7: Grinders

  EN 792-8:2001+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers

  EN 792-9:2001+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders

  EN 792-10:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tool...

  EN 792-11:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears

  EN 792-12:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small ...

  EN 815:1996+A2:2008

Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - S...

  EN 836:1997+A4:2011

Garden equipment - Powered lawnmowers - Safety

  EN 848-1:2007+A1:2009

Safety of woodworking machines - One side moulding machines with rotating tool - Part 1: S...

  EN 848-2:2007+A1:2009

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: S...

  EN 848-3:2007+A2:2009

Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: ...

  EN 859:2007+A1:2009

Safety of woodworking machines - Hand fed surface planing machines

  EN 860:2007+A1:2009

Safety of woodworking machines - One side thickness planing machines

  EN 861:2007+A1:2009

Safety of woodworking machines - Surface planing and thicknessing machines

  EN 940:2009

Safety of woodworking machines - Combined woodworking machines

  EN 996:1995+A3:2009

Piling equipment - Safety requirements

  EN 1034-3:1999+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1114-2:1998+A1:2008

Plastics and rubber machines - Extruders and extrusion lines - Part 2: Safety requirements...

  EN 1127-2:2002+A1:2008

Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and m...

  EN 1218-4:2004+A2:2009

Safety of woodworking machines - Tenoning machines - Part 4: Edge banding machines fed by ...

  EN 1417:1996+A1:2008

Plastics and rubber machines - Two roll mills - Safety requirements

  EN 1417:1996+A1:2008/AC:2009

Plastics and rubber machines - Two roll mills - Safety requirements

  EN 1459:1998+A3:2012

Safety of industrial trucks - Self-propelled variable reach trucks

  EN 1493:1998+A1:2008

Vehicle lifts

  EN 1501-1:1998+A2:2009

Refuse collection vehicles and their associated lifting devices - General requirements and...

  EN 1501-1:2011

Cranes - Bridge and gantry cranes

  EN 1539:2009

Dryers and ovens, in which flammable substances are released - Safety requirements

  EN 1570:1998+A2:2009

Safety requirements for lifting tables

  EN 1570-1:2011

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed la...

  EN 1674:2000+A1:2009

Food processing machinery - Dough and pastry brakes - Safety and hygiene requirements

  EN 1755:2000+A1:2009

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flam...

  EN 1777:2004+A1:2009

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and ...

  EN 1807:1999+A1:2009

Safety of woodworking machines - Band sawing machines

  EN 1808:1999+A1:2010

Safety requirements on Suspended Access Equipment - Design calculations, stability criteri...

  EN 1846-2:2001+A3:2009

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and perfor...

  EN 1846-2:2009

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and perfor...

  EN 1846-3:2002+A1:2008

Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safet...

  EN 1870-1:2007+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (...

  EN 1870-4:2001+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing ...

  EN 1870-5:2002+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up...

  EN 1870-7:2002+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawin...

  EN 1870-8:2001+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging ci...

  EN 1870-9:2000+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular ...

  EN 1870-10:2003+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automati...

  EN 1870-11:2003+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and au...

  EN 1870-12:2003+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sa...

  EN 1870-13:2007+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel...

  EN 1870-14:2007+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing...

  EN 1870-15:2004+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut ...

  EN 1870-16:2005+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing m...

  EN 1870-17:2007+A2:2009

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cut...

  EN 1870-17:2012

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cut...

  EN 1870-18:2013

Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws

  EN 1915-1:2001+A1:2009

Aircraft ground support equipment - General requirements - Part 1: Basic safety requiremen...

  EN 1953:1998+A1:2009

Atomising and spraying equipment for coating materials - Safety requirements

  EN ISO 2867:2008

Earth-moving machinery - Access systems (ISO 2867:2006, including Cor 1:2008)

  EN ISO 3164:2008

Earth-moving machinery - Laboratory evaluations of protective structures - Specifications ...

  EN ISO 3450:2008

Earth-moving machinery - Braking systems of rubber-tyred machines - Systems and performanc...

  EN ISO 3691-5:2009

Industrial trucks - Safety requirements and verification - Part 5: Pedestrian-propelled tr...

  EN ISO 3691-6:2013

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel ca...

  EN ISO 3691-6:2013/AC:2014

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel ca...

  EN ISO 4254-1:2009

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008)

  EN ISO 4254-1:2009/AC:2010

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2008)

  EN ISO 4254-1:2013

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

  EN ISO 4254-5:2009/AC:2010

Agricultural machinery - Safety - Part 5: Power-driven soil-working machines (ISO 4254-5:2...

  EN ISO 10218-1:2008

Robots for industrial environments - Safety requirements - Part 1: Robot (ISO 10218-1:2006...

  EN ISO 11111-1:2009

Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009)

  EN ISO 11148-3:2010

Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO...

  EN ISO 11148-4:2010

Hand-held non-electric power tools - Safety requirements - Part 4: Non­rotary percussive ...

  EN ISO 11148-6:2010

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools fo...

  EN ISO 11680-1:2008

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners ...

  EN ISO 11680-2:2008

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners ...

  EN ISO 11681-1:2008

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chai...

  EN ISO 11681-2:2008

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chai...

  EN ISO 11806:2008

Agricultural and forestry machinery - Portable hand-held combustion engine driven brush cu...

  EN 12001:2003+A1:2009

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

  EN 12012-2:2001+A2:2008

Plastics and rubber machines - Size reduction machines - Part 2: Safety requirements for s...

  EN 12016:2004+A1:2008

Electromagnetic compatibility - Product family standard for lifts, escalators and moving w...

  EN 12041:2000+A1:2009

Food processing machinery - Moulders - Safety and hygiene requirements

  EN 12042:2005+A1:2010

Food processing machinery - Automatic dividers - Safety and hygiene requirements

  EN 12043:2000+A1:2010

Food processing machinery - Intermediate provers - Safety and hygiene requirements

  EN 12110:2002+A1:2008

Tunnelling machines - Air locks - Safety requirements

  EN 12111:2002+A1:2009

Tunnelling machines - Road headers, continuous miners and impact rippers - Safety requirem...

  EN 12159:2000+A1:2009

Builders hoists for persons and materials with vertically guided cages

  EN 12254:1998+A2:2008

Screens for laser working places - Safety requirements and testing

  EN 12268:2003+A1:2010

Food processing machinery - Band saw machines - Safety and hygiene requirements

  EN 12312-1:2001+A1:2009

Aircraft ground support equipment - Specific requirements - Part 1: Passenger stairs

  EN 12312-2:2002+A1:2009

Aircraft ground support equipment - Specific requirements - Part 2: Catering vehicles

  EN 12312-3:2003+A1:2009

Aircraft ground support equipment - Specific requirements - Part 3: Conveyor belt vehicles

  EN 12312-4:2003+A1:2009

Aircraft ground support equipment - Specific requirements - Part 4: Passenger boarding bri...

  EN 12312-6:2004+A1:2009

Aircraft ground support equipment - Specific requirements - Part 6: Deicers and deicing/an...

  EN 12312-9:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 9: Container/Pallet loade...

  EN 12312-12:2002+A1:2009

Aircraft ground support equipment - Specific requirements - Part 12: Potable water service...

  EN 12312-13:2002+A1:2009

Aircraft ground support equipment - Specific requirements - Part 13: Lavatory service equi...

  EN 12312-14:2006+A1:2009

Aircraft ground support equipment - Specific requirements - Part 14: Disabled/incapacitate...

  EN 12336:2005+A1:2008

Tunnelling machines - Shield machines, thrust boring machines, auger boring machines, lini...

  EN 12409:2008

Plastics and rubber machines - Thermoforming machines - Safety requirements

  EN 12547:1999+A1:2009

Centrifuges - Common safety requirements

  EN 12601:2010

Reciprocating internal combustion engine driven generating sets - Safety

  EN 12622:2009

Safety of machine tools - Hydraulic press brakes

  EN 12643:1997+A1:2008

Earth-moving machinery - Rubber-tyred machines - Steering requirements (ISO 5010:1992 modi...

  EN 12649:2008

Concrete compactors and smoothing machines - Safety

  EN 12750:2001+A1:2009

Safety of woodworking machines - Four-sided moulding machines

  EN 12779:2004+A1:2009

Safety of woodworking machines - Chip and dust extraction systems with fixed installation ...

  EN 12851:2005+A1:2010

Food processing machinery - Catering attachments for machines having an auxiliary drive hu...

  EN 12881-1:2005+A1:2008

Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests

  EN 12882:2008

Conveyor belts for general purpose use - Electrical and flammability safety requirements

  EN 12957:2001+A1:2009

Machine tools - Safety - Electro discharge machines

  EN 12999:2011

Cranes - Loader cranes

  EN 13000:2010

Cranes - Mobile cranes

  EN 13000:2010/AC:2010

Cranes - Mobile cranes

  EN 13001-1:2004+A1:2009

Cranes - General design - Part 1: General principles and requirements

  EN 13001-1:2004+A1:2009/AC:2009

Cranes - General design - Part 1: General principles and requirements

  EN 13001-2:2004+A3:2009

Crane safety - General design - Part 2: Load effects

  EN 13001-2:2011

Crane safety - General design - Part 2: Load actions

  EN 13001-2:2011/AC:2012

Crane safety - General design - Part 2: Load actions

  EN 13001-3-1:2012

Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure

  EN 13020:2004+A1:2010

Road surface treatment machines - Safety requirements

  EN 13120:2009

Internal blinds - Performance requirements including safety

  EN 13135-1:2003+A1:2010

Cranes - Equipment - Part 1: Electrotechnical equipment

  EN 13135-2:2004+A1:2010

Cranes - Equipment - Part 2: Non-electrotechnical equipment

  EN 13204:2004+A1:2012

Double acting hydraulic rescue tools for fire and rescue service use - Safety and performa...

  EN 13218:2002+A1:2008

Machine tools - Safety - Stationary grinding machines

  EN 13241-1:2003+A1:2011

Industrial, commercial and garage doors and gates - Product standard - Part 1: Products wi...

  EN 13411-4:2002+A1:2008

Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing

  EN 13418:2004+A1:2008

Plastics and rubber machines - Winding machines for film or sheet - Safety requirements

  EN 13524:2003+A1:2009

Highway maintenance machines - Safety requirements

  EN 13525:2005+A2:2009

Forestry machinery - Wood chippers - Safety

  EN 13561:2004+A1:2008

External blinds - Performance requirements including safety

  EN 13617-1:2004+A1:2009

Petrol filling stations - Part 1: Safety requirements for construction and performance of ...

  EN 13659:2004+A1:2008

Shutters - Performance requirements including safety

  EN 13683:2003+A1:2009

Garden equipment - Integrally powered shredders/chippers - Safety

  EN 13684:2004+A2:2009

Garden equipment - Pedestrian controlled lawn aerators and scarifiers - Safety

  EN 13732:2002+A2:2009

Food processing machinery - Bulk Milk Coolers on Farms - Requirements for construction, pe...

  EN 13870:2005+A1:2010

Food processing machinery - Chop cutting machines - Safety and hygiene requirements

  EN 13871:2005+A1:2010

Food processing machinery - Cubes cutting machinery - Safety and hygiene requirements

  EN 13898:2003+A1:2009

Machine tools - Safety - Sawing machines for cold metal

  EN 13898:2003+A1:2009/AC:2010

Machine tools - Safety - Sawing machines for cold metal

  EN 13951:2003+A1:2008

Liquid pumps - Safety requirements - Agrifoodstuffs equipment - Design rules to ensure hyg...

  EN 14017:2005+A1:2008

Agricultural and forestry machinery - Solid fertilizer distributors - Safety

  EN 14033-3:2009

Railway applications - Track - Railbound construction and maintenance machines - Part 3: G...

  EN 14033-3:2009+A1:2011

Railway applications - Track - Railbound construction and maintenance machines - Part 3: G...

  EN 14043:2005+A1:2009

High rise aerial appliances for fire service use - Turntable ladders with combined movemen...

  EN 14044:2005+A1:2009

High rise aerial appliances for fire service use - Turntable ladders with sequential movem...

  EN 14861:2004+A1:2009

Forest machinery - Self propelled machinery - Safety requirements

  EN 14973:2006+A1:2008

Conveyor belts for use in underground installations - Electrical and flammability safety r...

  EN 15011:2011

Cranes - Bridge and gantry cranes

  EN 15059:2009

Snow grooming equipment - Safety requirements

  EN 15503:2009

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

  EN 15503:2009+A1:2013

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

  EN 15695-1:2009

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) ag...

  EN 15695-2:2009

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) ag...

  EN 15746-2:2010

Railway applications - Track - Road-rail machines and associated equipment - Part 2: Gener...

  EN 15811:2009

Agricultural machinery - Guards for moving parts of power transmission - Guard opening wit...

  EN 16230-1:2013

Leisure karts - Part 1: Safety requirements and test methods for karts

  EN 16307-1:2013

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requireme...

  EN ISO 19432:2008

Building construction machinery and equipment - Portable, hand-held, internal combustion e...

  EN ISO 20361:2009

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2007...

  EN ISO 22867:2008

Forestry machinery - Vibration test code for portable hand-held machines with internal com...

  EN ISO 22868:2008

Forestry machinery - Noise test code for portable hand-held machines with internal combust...

  EN ISO 23125:2010

Machine tools - Safety - Turning machines (ISO 23125:2010)

  EN ISO 23125:2010/A1:2012

Machine tools - Safety - Turning machines (ISO 23125:2010)

  EN 60204-1:2006/A1:2009

Safety of machinery - Electrical equipment of machines - Part 1: General requirements

  EN 60335-2-69:2009

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements ...

  EN 60335-2-72:2009

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements ...

  EN 61496-1:2004

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirement...

  EN 61496-1:2004/AC:2010

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirement...

  EN 61496-1:2004/A1:2008

Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirement...

  EN 62061:2005/A1:2013

Safety of machinery - Functional safety of safety-related electrical, electronic and progr...

  EN 62061:2005/A2:2015

Safety of machinery - Functional safety of safety-related electrical, electronic and progr...

  EN 50223:2010

Stationary electrostatic application equipment for ignitable flock material - Safety requi...

  EN 60335-1:2002

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/AC:2009

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/AC:2010

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A11:2004

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A1:2004

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A12:2006

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A13:2008

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A14:2010

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A12:2006/AC:2007

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A1:2004/AC:2007

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-1:2002/A15:2011

Household and similar electrical appliances - Safety - Part 1: General requirements

  EN 60335-2-8:2015/A1:2016

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements f...

  EN 60335-2-23:2003/A2:2015

Household and similar electrical appliances - Safety - Part 2-23: Particular requirements ...

  EN 60335-2-40:2003/A1:2006

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-40:2003/A2:2009

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements ...

  EN 60335-2-67:2009

Household and similar electrical appliances - Safety - Part 2-67: Particular requirements ...

  EN 60335-2-68:2009

Household and similar electrical appliances - Safety - Part 2-68: Particular requirements ...

  EN 60335-2-79:2009

Household and similar electrical appliances - Safety - Part 2-79: Particular requirements ...

  EN 60335-2-89:2010/A1:2016

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements ...

  EN 60335-2-89:2010/A2:2017

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements ...

  EN 60335-2-95:2015/A1:2015

Household and similar electrical appliances - Safety - Part 2-95: Particular requirements ...

  EN 60745-1:2009

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

  EN 60745-1:2009/AC:2009

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

  EN 60745-1:2009/A11:2010

Hand-held motor-operated electric tools - Safety - Part 1: General requirements

  EN 60745-2-2:2010

Hand-held motor-operated electric tools - Safety - Part 2-2: Particular requirements for s...

  EN 60745-2-3:2011/A2:2013

Hand-held motor-operated electric tools - Safety - Part 2-3: Particular requirements for g...

  EN 60745-2-4:2009

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for s...

  EN 60745-2-4:2009/A11:2011

Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for s...

  EN 60745-2-5:2010

Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for c...

  EN 60745-2-8:2009

Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for s...

  EN 60745-2-9:2009

Hand-held motor-operated electric tools - Safety - Part 2-9: Particular requirements for t...

  EN 60745-2-13:2009/A1:2010

Hand-held motor-operated electric tools - Safety - Part 2-13: Particular requirements for ...

  EN 60745-2-14:2009

Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for ...

  EN 60745-2-14:2009/A2:2010

Hand-held motor-operated electric tools - Safety - Part 2-14: Particular requirements for ...

  EN 60745-2-15:2009/A1:2010

Hand-held motor-operated electric tools - Safety - Part 2-15: Particular requirements for ...

  EN 60745-2-19:2009/A1:2010

Hand-held motor-operated electric tools - Safety - Part 2-19: Particular requirements for ...

  EN 60745-2-21:2009/A1:2010

Hand-held motor-operated electric tools - Safety - Part 2-21: Particular requirements for ...

  EN 60947-5-5:1997/A1:2005

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 60947-5-5:1997/A2:2017

Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching e...

  EN 61029-1:2009

Safety of transportable motor-operated electric tools - Part 1: General requirements

  EN 61029-1:2009/AC:2009

Safety of transportable motor-operated electric tools - Part 1: General requirements

  EN 61029-1:2009/A11:2010

Safety of transportable motor-operated electric tools - Part 1: General requirements

  EN 61029-2-1:2010

Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements ...

  EN 61029-2-1:2012

Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements ...

  EN 61029-2-6:2010

Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements ...

  EN 61029-2-9:2009

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements ...

  EN 61029-2-10:2010

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements...

  EN 61029-2-10:2010/A11:2013

Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements...

  EN 61029-2-11:2009

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements...

  EN 50561-1:2013/AC:2015

Power line communication apparatus used in low-voltage installations - Radio disturbance c...

  EN 55011:2009/A1:2010

Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics...

  EN 55012:2007/A1:2009

Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limi...

  EN 55014-1:2006/A1:2009

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55014-1:2006/A2:2011

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55014-2:1997/A1:2001

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55014-2:1997/A2:2008

Electromagnetic compatibility - Requirements for household appliances, electric tools and ...

  EN 55015:2006/A1:2007

Limits and methods of measurement of radio disturbance characteristics of electrical light...

  EN 55015:2006/A2:2009

Limits and methods of measurement of radio disturbance characteristics of electrical light...

  EN 60204-31:1998

Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EM...

  EN 60730-1:2000

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60730-1:2000/A1:2004

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60730-1:2000/A16:2007

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60730-1:2000/A2:2008

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60730-1:2000/A16:2007/AC:2010

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60730-1:2000/AC:2007

Automatic electrical controls for household and similar use - Part 1: General requirements

  EN 60947-4-3:2000

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60947-4-3:2000/A1:2006

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60947-4-3:2000/A2:2011

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60974-10:2007

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

  EN 61000-3-2:2006

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emiss...

  EN 61000-3-2:2006/A1:2009

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emiss...

  EN 61000-3-2:2006/A2:2009

Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emiss...

  EN 61000-3-3:2008

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, vo...

  EN 61008-1:2004

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2004/A11:2007

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2004/A12:2009

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61008-1:2004/A13:2012

Residual current operated circuit-breakers without integral overcurrent protection for hou...

  EN 61009-1:2004

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/A11:2008

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/A12:2009

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/A13:2009

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 61009-1:2004/A14:2012

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN 62423:2009

Type B residual current operated circuit-breakers with and without integral overcurrent pr...

  EN 60065:2002/A1:2006

Audio, video and similar electronic apparatus - Safety requirements

  EN 60065:2002/A2:2010

Audio, video and similar electronic apparatus - Safety requirements

  EN 60127-2:2003/A1:2003

Miniature fuses - Part 2: Cartridge fuse-links

  EN 60127-2:2003/A2:2010

Miniature fuses - Part 2: Cartridge fuse-links

  EN 60127-6:1994/A1:1996

Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

  EN 60127-6:1994/A2:2003

Miniature fuses - Part 6: Fuse-holders for miniature fuse-links

  EN 60238:2004/A1:2008

Edison screw lampholders

  EN 60238:2004/A2:2011

Edison screw lampholders

  EN 60332-1-3:2004/A1:2015

Tests on electric and optical fibre cables under fire conditions - Part 1-3: Test for vert...

  EN 60335-2-3:2002/A1:2005

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements f...

  EN 60335-2-3:2002/A2:2008

Household and similar electrical appliances - Safety - Part 2-3: Particular requirements f...

  EN 60335-2-5:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-5:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-5: Particular requirements f...

  EN 60335-2-6:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-6:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-6: Particular requirements f...

  EN 60335-2-8:2003/A1:2005

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements f...

  EN 60335-2-8:2003/A2:2008

Household and similar electrical appliances - Safety - Part 2-8: Particular requirements f...

  EN 60335-2-31:2003/A1:2006

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements ...

  EN 60335-2-31:2003/A2:2009

Household and similar electrical appliances - Safety - Part 2-31: Particular requirements ...

  EN 60335-2-34:2002

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements ...

  EN 60335-2-34:2002/A1:2005

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements ...

  EN 60335-2-34:2002/A2:2009

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements ...

  EN 60335-2-34:2002/A11:2004

Household and similar electrical appliances - Safety - Part 2-34: Particular requirements ...

  EN 60335-2-35:2002/A1:2007

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements ...

  EN 60335-2-35:2002/A2:2011

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements ...

  EN 60335-2-102:2006/A1:2010

Household and similar electrical appliances - Safety - Part 2-102: Particular requirements...

  EN 60400:2008/A1:2011

Lampholders for tubular fluorescent lamps and starterholders

  EN 60400:2008/A2:2014

Lampholders for tubular fluorescent lamps and starterholders

  EN 60598-2-7:1989/A2:1996

Luminaires - Part 2: Particular requirements - Section 7: Portable luminaires for garden u...

  EN 60598-2-8:1997/A1:2000

Luminaires - Part 2-8: Particular requirements - Handlamps

  EN 60598-2-8:1997/A2:2008

Luminaires - Part 2-8: Particular requirements - Handlamps

  EN 60598-2-17:1989/A2:1991

Luminaires - Part 2: Particular requirements - Section 17: Luminaires for stage lighting, ...

  EN 60598-2-22:1998/A1:2003

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60598-2-22:1998/A2:2008

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 60669-1:1999/A1:2002

Switches for household and similar fixed-electrical installations - Part 1: General requir...

  EN 60669-1:1999/A2:2008

Switches for household and similar fixed-electrical installations - Part 1: General requir...

  EN 60695-11-10:1999/A1:2003

Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test me...

  EN 60695-11-20:1999/A1:2003

Fire hazard testing - Part 11-20: Test flames - 500 W flame test methods

  EN 60730-2-5:2002/A1:2004

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60730-2-5:2002/A2:2010

Automatic electrical controls for household and similar use - Part 2-5: Particular require...

  EN 60831-1:1996/A1:2003

Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up...

  EN 60838-2-1:1996/A2:2004

Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14

  EN 60947-4-3:2000/A1:2006

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60947-4-3:2000/A2:2011

Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semi...

  EN 60947-5-3:1999/A1:2005

Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching e...

  EN 60950-1:2006/A1:2010

Information technology equipment - Safety - Part 1: General requirements

  EN 60950-1:2006/A2:2013

Information technology equipment - Safety - Part 1: General requirements

  EN 61010-2-081:2002/A1:2003

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61010-031:2002/A1:2008

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN 61347-1:2008/A1:2011

Lamp controlgear - Part 1: General and safety requirements

  EN 61347-1:2008/A2:2013

Lamp controlgear - Part 1: General and safety requirements

  EN 61347-2-8:2001/A1:2006

Lamp controlgear - Part 2-8: Particular requirements for ballasts for fluorescent lamps

  EN 61558-1:1997/A1:1998

Safety of power transformers, power supply units and similar - Part 1: General requirement...

  EN 61730-1:2007/A1:2012

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

  EN 61730-1:2007/A2:2013

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

  EN 61730-2:2007/A1:2012

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

  EN 62035:2000/A1:2003

Discharge lamps (excluding fluorescent lamps) - Safety specifications

  EN 62035:2000/A2:2012

Discharge lamps (excluding fluorescent lamps) - Safety specifications

  EN 378-2:2008+A2:2012

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Des...

  EN 10028-1:2007+A1:2009

Flat products made of steels for pressure purposes - Part 1: General requirements

  EN 10028-1:2007+A1:2009/AC:2009

Flat products made of steels for pressure purposes - Part 1: General requirements

  EN 10028-2:2009

Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels wi...

  EN 10028-3:2009

Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, n...

  EN 10028-4:2009

Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with spec...

  EN 10028-5:2009

Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, t...

  EN 10028-6:2009

Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, q...

  EN 10028-7:2007

Flat products made of steels for pressure purposes - Part 7: Stainless steels

  EN 10222-1:1998

Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

  EN 10222-1:1998/A1:2002

Steel forgings for pressure purposes - Part 1: General requirements for open die forgings

  EN 10222-2:1999

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specif...

  EN 10222-2:1999/AC:2000

Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specif...

  EN 10222-3:1998

Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperatur...

  EN 10222-4:1998

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof ...

  EN 10222-4:1998/A1:2001

Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof ...

  EN 10222-5:1999

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferr...

  EN 10222-5:1999/AC:2000

Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferr...

  EN 10272:2007

Stainless steel bars for pressure purposes

  EN 10273:2007

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature p...

  EN 12178:2003

Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements, tes...

  EN 13480-1:2012

Metallic industrial piping - Part 1: General

  EN 13480-2:2012

Metallic industrial piping - Part 2: Materials

  EN 13480-2:2012/A1:2013

Metallic industrial piping - Part 2: Materials

  EN 13480-3:2012

Metallic industrial piping - Part 3: Design and calculation

  EN 13480-5:2012

Metallic industrial piping - Part 5: Inspection and testing

  EN 13480-5:2012/A1:2013

Metallic industrial piping - Part 5: Inspection and testing

  EN 13480-6:2012

Metallic industrial piping - Part 6: Additional requirements for buried piping

  EN 13480-8:2012

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium a...

  EN 13480-8:2012/A1:2014

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium a...

  EN 13480-8:2012/A2:2015

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium a...

  EN 1839:2012

Determination of explosion limits of gases and vapours

  EN 13463-1:2009

Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic meth...

  EN 13463-5:2011

Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: P...

  EN 13463-6:2005

Non-electrical equipment for use in potentially explosive atmospheres - Part 6: Protection...

  EN 13463-8:2003

Non-electrical equipment for potentially explosive atmospheres - Part 8: Protection by liq...

  EN 13616:2004

Overfill prevention devices for static tanks for liquid petroleum fuels

  EN 13616:2004/AC:2006

Overfill prevention devices for static tanks for liquid petroleum fuels

  EN 13821:2002

Potentially explosive atmospheres - Explosion prevention and protection - Determination of...

  EN 14756:2006

Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours

  EN 14986:2007

Design of fans working in potentially explosive atmospheres

  EN ISO 16852:2010

Flame arresters - Performance requirements, test methods and limits for use (ISO 16852:200...

  EN 50050:2006

Electrical apparatus for potentially explosive atmospheres - Electrostatic hand-held spray...

  EN 50223:2010

Stationary electrostatic application equipment for ignitable flock material - Safety requi...

  EN 60079-1:2007

Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures 'd'

  EN 60079-2:2007

Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p'

  EN 60079-5:2007

Explosive atmospheres - Part 5: Equipment protection by powder filling 'q'

  EN 60079-6:2007

Explosive atmospheres - Part 6: Equipment protection by oil immersion 'o'

  EN 60079-7:2007

Explosive atmospheres - Part 7: Equipment protection by increased safety 'e'

  EN IEC 60079-7:2015/A1:2018

Explosive atmospheres - Part 7: Equipment protection by increased safety 'e'

  EN 60079-18:2009

Explosive atmospheres - Part 18: Equipment protection by encapsulation 'm'

  EN 60079-26:2007

Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga

  EN 60079-27:2008

Explosive atmospheres - Part 27: Fieldbus intrinsically safe concept (FISCO)

  EN 60079-28:2007

Explosive atmospheres - Part 28: Protection of equipment and transmission systems using op...

  EN 60079-29-1:2007

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors f...

  EN 60079-31:2009

Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure 't'

  EN 61241-4:2006

Electrical apparatus for use in the presence of combustible dust - Part 4: Type of protect...

  EN 81-73:2005

Safety rules for the construction and installation of lifts - Particular applications for ...

  EN 343:2019

Protective clothing - Protection against rain

  EN 13158:2018

Protective clothing - Protective jackets, body and shoulder protectors for equestrian use,...

  EN 71-1:2011

Safety of toys - Part 1: Mechanical and physical properties

  EN 71-1:2011+A2:2013

Safety of toys - Part 1: Mechanical and physical properties

  EN 71-1:2011+A3:2014

Safety of toys - Part 1: Mechanical and physical properties

  EN 71-2:2011

Safety of toys - Part 2: Flammability

  EN 71-3:2013

Safety of toys - Part 3: Migration of certain elements

  EN 71-5:2013

Safety of toys - Part 5: Chemical toys (sets) other than experimental sets

  EN 13012:2021

Petrol filling stations - Construction and performance of automatic nozzles for use on fue...

  EN 13617-1:2021

Petrol filling stations - Part 1: Safety requirements for construction and performance of ...

  EN 13617-2:2021

Petrol filling stations - Part 2: Safety requirements for construction and performance of ...

  EN 13617-3:2021

Petrol filling stations - Part 3: Safety requirements for construction and performance of ...

  EN 13617-4:2021

Petrol filling stations - Part 4: Safety requirements for construction and performance of ...

  EN IEC 61010-2-034:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61010-2-034:2021/A11:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 50520:2020

Cover plates and cover tapes for the protection and location warning of buried cables or b...

  EN 50520:2020/A1:2021

Cover plates and cover tapes for the protection and location warning of buried cables or b...

  EN 60898-2:2021

Electrical accessories - Circuit-breakers for overcurrent protection for household and sim...

  EN IEC 61010-2-051:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61010-2-051:2021/A11:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61010-2-061:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61010-2-061:2021/A11:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61010-2-030:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61010-2-030:2021/A11:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN 60598-2-13:2006/A11:2021

Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires

  EN 61534-1:2011/A11:2021

Powertrack systems - Part 1: General requirements

  EN 61534-1:2011/A2:2021

Powertrack systems - Part 1: General requirements

  EN 61534-21:2014/A11:2021

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for ...

  EN 61534-21:2014/A1:2021

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for ...

  EN 61534-22:2014/A11:2021

Powertrack systems - Part 22: Particular requirements for powertrack systems intended for ...

  EN 61534-22:2014/A1:2021

Powertrack systems - Part 22: Particular requirements for powertrack systems intended for ...

  EN 62135-1:2015/AC:2016

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and ins...

  EN 301 908-15 V15.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 15: Evolved ...

  EN 301 908-14 V15.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved ...

  EN 301 908-18 V15.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 18: E-UTRA, ...

  EN 302 217-2 V3.3.1

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and ant...

  EN 302 480 V2.2.1

Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard for access to ...

  EN 302 567 V2.2.1

Multiple-Gigabit/s radio equipment operating in the 60 GHz band

  EN 303 345-3 V1.1.1

Broadcast Sound Receivers; Part 3: FM broadcast sound service

  EN 303 345-4 V1.1.1

Broadcast Sound Receivers; Part 4: DAB broadcast sound service

  EN 303 348 V1.2.1

Audio frequency induction loop drivers up to 45 amperes in the frequency range 10 Hz to 9 ...

  EN 303 372-2 V1.2.1

Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part ...

  EN 303 413 V1.2.1

Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) rece...

  EN 303 758 V1.1.1

TETRA radio equipment using non-constant envelope modulation operating in a channel bandwi...

  EN 300 718-1 V2.2.1

Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 1: Harmonised S...

  EN 301 444 V2.2.1

Satellite Earth Stations and Systems (SES); Land Mobile Earth Stations (LMES) and Maritime...

  EN 301 908-1 V15.1.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduct...

  EN 302 296 V2.2.1

Digital Terrestrial TV Transmitters

  EN 303 364-2 V1.1.1

Primary Surveillance Radar (PSR); Harmonised Standard for access to radio spectrum; Part 2...

  EN 303 372-1 V1.2.1

Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part ...

  EN 303 980 V1.2.1

Satellite Earth Stations and Systems (SES); Fixed and in-motion Earth Stations communicati...

  EN 303 981 V1.2.1

Satellite Earth Stations and Systems (SES); Fixed and in-motion Wide Band Earth Stations c...

  EN ISO 12402-5:2020

Personal flotation devices - Part 5: Buoyancy aids (level 50)- Safety requirements (ISO 12...

  EN ISO 12402-6:2020

Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids- Safety...

  EN ISO 12402-8:2020

Personal flotation devices - Part 8: Accessories - Safety requirements and test methods (I...

  EN ISO 12402-2:2020

Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requireme...

  EN ISO 12402-3:2020

Personal flotation devices - Part 3: Lifejackets, performance level 150 - Safety requireme...

  EN ISO 12402-4:2020

Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety requireme...

  EN 143:2021

Respiratory protective devices - Particle filters - Requirements, testing, marking

  EN ISO 13688:2013/A1:2021

Protective clothing - General requirements (ISO 13688:2013)

  EN ISO 18527-2:2021

Eye and face protection for sports use - Part 2: Requirements for eye protectors for squas...

  EN ISO 20349-1:2017/A1:2020

Personal protective equipment - Footwear protecting against risks in foundries and welding...

  EN ISO 20349-2:2017/A1:2020

Personal protective equipment - Footwear protecting against risks in foundries and welding...

  EN 81-22:2021

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 13760:2021

LPG equipment and accessories Automotive LPG filling system for light and heavy duty vehi...

  EN 14373:2021

Explosion suppression systems

  EN 15967:2022

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases...

  EN 13480-3:2017/A4:2021

Metallic industrial piping - Part 3: Design and calculation

  EN 13480-2:2017/A8:2021

Metallic industrial piping - Part 2: Materials

  EN 13480-5:2017/A2:2021

Metallic industrial piping - Part 5: Inspection and testing

  EN 3-8:2021

Portable fire extinguishers - Part 8: Requirements for the construction, pressure resistan...

  EN ISO 9712:2022

Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2021)

  EN 10253-2:2021

Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific ins...

  EN 12516-2:2014+A1:2021

Industrial valves - Shell design strength - Part 2: Calculation method for steel valve she...

  EN 12952-2:2021

Water-tube boilers and auxiliary installations - Part 2: Materials for pressure parts of b...

  EN 12952-5:2021

Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of p...

  EN 12952-6:2021

Water-tube boilers and auxiliary installations - Part 6: Inspection during construction, d...

  EN 12952-10:2021

Water-tube boilers and auxiliary installations - Part 10: Requirements for safety devices ...

  EN 13121-1:2021

GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditi...

  EN 14917:2021

Metal bellows expansion joints for pressure applications

  EN ISO 21922:2021

Refrigerating systems and heat pumps - Valves - Requirements, testing and marking (ISO 219...

  EN 13001-3-6:2018+A1:2021

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hy...

  EN 60335-1:2012/A15:2021

Household and similar electrical appliances - Safety - Part 1: General requirements IEC 60...

  EN 50636-2-107:2015/A3:2021

Safety of household and similar appliances - Part 2-107: Particular requirements for robot...

  EN ISO 11202:2010/A1:2021

Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pre...

  EN 303-5:2021

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stok...

  EN 1501-1:2021

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear l...

  EN 1501-2:2021

Refuse collection vehicles - General requirements and safety requirements - Part 2: Side l...

  EN 1501-3:2021

Refuse collection vehicles - General requirements and safety requirements - Part 3: Front ...

  EN 1501-5:2021

Refuse collection vehicles - General requirements and safety requirements - Part 5: Liftin...

  EN 1756-1:2021

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part ...

  EN 1829-1:2021

High-pressure water jet machines - Safety requirements - Part 1: Machines

  EN 12312-5:2021

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equi...

  EN 12385-5:2021

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

  EN 12609:2021

Truck mixers - Safety requirements

  EN 13001-2:2021

Crane safety - General design - Part 2: Load actions

  EN 13852-3:2021

Cranes - Offshore cranes - Part 3: Light offshore cranes

  EN ISO 19085-1:2021

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2021)

  EN ISO 22868:2021

Forestry and gardening machinery - Noise test code for portable hand-held machines with in...

  EN IEC 62061:2021

Safety of machinery - Functional safety of safety-related control systems IEC 62061:2021

  EN 60335-2-15:2016/A12:2021

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2016/A1:2021

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-15:2016/A2:2021

Household and similar electrical appliances - Safety - Part 2-15: Particular requirements ...

  EN 60335-2-29:2021

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements ...

  EN 60335-2-29:2021/A1:2021

Household and similar electrical appliances - Safety - Part 2-29: Particular requirements ...

  EN 60335-2-35:2016/A2:2021

Household and similar electrical appliances - Safety - Part 2-35: Particular requirements ...

  EN 60335-2-61:2003/A12:2021

Household and similar electrical appliances - Safety - Part 2-61: Particular requirements ...

  EN IEC 60335-2-84:2021

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements ...

  EN IEC 60335-2-84:2021/A11:2021

Household and similar electrical appliances - Safety - Part 2-84: Particular requirements ...

  EN IEC 60335-2-105:2021

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements...

  EN IEC 60335-2-105:2021/A11:2021

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements...

  EN IEC 60335-2-105:2021/A1:2021

Household and similar electrical appliances - Safety - Part 2-105: Particular requirements...

  EN 60335-2-27:2013/AC:2021-11

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements ...

  EN 60335-2-21:2021/A1:2021

Household and similar electrical appliances - Safety - Part 2-21: Particular requirements ...

  EN 50689:2021

Safety of laser products - Particular Requirements for Consumer Laser Products

  EN IEC 61010-2-011:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61010-2-011:2021/A11:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61347-2-14:2018

Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic...

  EN IEC 61347-2-14:2018/A11:2021

Lamp controlgear - Part 2-14: Particular requirements for DC and/or AC supplied electronic...

  EN IEC 60320-1:2021

Appliance couplers for household and similar general purposes - Part 1: General requiremen...

  EN IEC 60335-2-25:2021

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements ...

  EN IEC 60335-2-25:2021/A11:2021

Household and similar electrical appliances - Safety - Part 2-25: Particular requirements ...

  EN IEC 60335-2-41:2021

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements ...

  EN IEC 60335-2-41:2021/A11:2021

Household and similar electrical appliances - Safety - Part 2-41: Particular requirements ...

  EN IEC 60335-2-96:2021

Household and similar electrical appliances - Safety - Part 2-96: Particular requirements ...

  EN IEC 60335-2-96:2021/A11:2021

Household and similar electrical appliances - Safety - Part 2-96: Particular requirements ...

  EN IEC 60974-8:2021

Arc welding equipment - Part 8: Gas consoles for welding and plasma cutting systems

  EN IEC 61010-2-032:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61010-2-032:2021/A11:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61010-2-040:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61914:2021

Cable cleats for electrical installations

  EN IEC 62031:2020

LED modules for general lighting - Safety specifications

  EN IEC 62031:2020/A11:2021

LED modules for general lighting - Safety specifications

  EN 60335-2-54:2008/A12:2021

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements ...

  EN 60335-2-54:2008/A2:2021

Household and similar electrical appliances - Safety - Part 2-54: Particular requirements ...

  EN 61009-1:2012/A13:2021

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN IEC 61010-2-091:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61010-2-091:2021/A11:2021

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 60598-2-22:2022

Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting

  EN 61347-2-7:2012/A2:2022

Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic contr...

  EN IEC 60598-1:2021/A11:2022

Luminaires - Part 1: General requirements and tests

  EN IEC 61010-2-012:2022

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61010-2-012:2022/A11:2022

Safety requirements for electrical equipment for measurement, control and laboratory use -...

  EN IEC 61557-12:2022

Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Eq...

  EN 71-3:2013+A1:2014

Safety of toys - Part 3: Migration of certain elements

  EN 71-13:2021+A1:2022

Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games

  EN 149:2001+A1:2009

Respiratory protective devices - Filtering half masks to protect against particles - Requi...

  EN 343:2003+A1:2007

Protective clothing - Protection against rain

  EN 343:2003+A1:2007/AC:2009

Protective clothing - Protection against rain

  EN 353-1:2014+A1:2017

Personal fall protection equipment - Guided type fall arresters including an anchor line -...

  EN 379:2003+A1:2009

Personal eye-protection - Automatic welding filters

  EN 397:2012+A1:2012

Industrial safety helmets

  EN 405:2001+A1:2009

Respiratory protective devices - Valved filtering half masks to protect against gases or g...

  EN 420:2003+A1:2009

Protective gloves - General requirements and test methods

  EN 659:2003+A1:2008

Protective gloves for firefighters

  EN 659:2003+A1:2008/AC:2009

Protective gloves for firefighters

  EN 966:2012+A1:2012

Helmets for airborne sports

  EN 1078:2012+A1:2012

Helmets for pedal cyclists and for users of skateboards and roller skates

  EN 1827:1999+A1:2009

Respiratory protective devices - Half masks without inhalation valves and with separable f...

  EN 13034:2005+A1:2009

Protective clothing against liquid chemicals - Performance requirements for chemical prote...

  EN 13138-1:2021

Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for b...

  EN 13138-1:2021/AC:2022

Buoyant aids for swimming instruction - Part 1: Safety requirements and test methods for b...

  EN 13546:2002+A1:2007

Protective clothing - Hand, arm, chest, abdomen, leg, foot and genital protectors for fiel...

  EN 13567:2002+A1:2007

Protective clothing - Hand, arm, chest, abdomen, leg, genital and face protectors for fenc...

  EN 14052:2012+A1:2012

High performance industrial helmets

  EN 14120:2003+A1:2007

Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports eq...

  EN 14387:2004+A1:2008

Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, test...

  EN 14605:2005+A1:2009

Protective clothing against liquid chemicals - performance requirements for clothing with ...

  EN ISO 16321-1:2022

Eye and face protection for occupational use - Part 1: General requirements (ISO 16321-1:2...

  EN ISO 16321-2:2021

Eye and face protection for occupational use - Part 2: Additional requirements for protect...

  EN ISO 16321-3:2022

Eye and face protection for occupational use - Part 3: Additional requirements for mesh pr...

  EN 17520:2021

Mountaineering equipment - Personal belay lanyards - Safety requirements and test methods

  EN ISO 18527-1:2022

Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snow...

  EN ISO 20345:2022

Personal protective equipment - Safety footwear (ISO 20345:2021)

  EN 1710:2005+A1:2008

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 1710:2005+A1:2008/AC:2010

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 17348:2022

Requirements for design and testing of vacuum cleaners for use in potentially explosive at...

  EN 60079-29-1:2016/A11:2022

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors f...

  EN 60079-29-1:2016/A1:2022

Explosive atmospheres - Part 29-1: Gas detectors - Performance requirements of detectors f...

  EN IEC 60947-3:2021

Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnec...

  EN 60974-10:2014/A1:2015

Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements

  EN 61009-1:2012/A13:2021

Residual current operated circuit-breakers with integral overcurrent protection for househ...

  EN IEC 62053-21:2021

Electricity metering equipment - Particular requirements - Part 21: Static meters for AC a...

  EN IEC 62053-21:2021/A11:2021

Electricity metering equipment - Particular requirements - Part 21: Static meters for AC a...

  EN IEC 62053-22:2021

Electricity metering equipment - Particular requirements - Part 22: Static meters for AC a...

  EN IEC 62053-22:2021/A11:2021

Electricity metering equipment - Particular requirements - Part 22: Static meters for AC a...

  EN IEC 62053-23:2021

Electricity metering equipment - Particular requirements - Part 23: Static meters for reac...

  EN IEC 62053-23:2021/A11:2021

Electricity metering equipment - Particular requirements - Part 23: Static meters for reac...

  EN IEC 62053-24:2021

Electricity metering equipment - Particular requirements - Part 24: Static meters for fund...

  EN IEC 62053-24:2021/A11:2021

Electricity metering equipment - Particular requirements - Part 24: Static meters for fund...

  EN IEC 60335-2-11:2022

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements ...

  EN IEC 60335-2-11:2022/A11:2022

Household and similar electrical appliances - Safety - Part 2-11: Particular requirements ...

  EN 60335-2-30:2009/A13:2022

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60335-2-30:2009/A2:2022

Household and similar electrical appliances - Safety - Part 2-30: Particular requirements ...

  EN 60529:1991/A2:2013/AC:2019-02

Degrees of protection provided by enclosures (IP Code)

  EN IEC 60598-1:2021

Luminaires - Part 1: General requirements and tests

  EN 60598-2-11:2013/A1:2022

Luminaires - Part 2-11: Particular requirements - Aquarium luminaires

  EN IEC 61010-2-033:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61010-2-033:2021/A11:2021

Safety requirements for electrical equipment for measurement, control, and laboratory use ...

  EN IEC 61535:2019

Installation couplers intended for permanent connection in fixed installations

  EN 62135-1:2015/AC:2016-02

Resistance welding equipment - Part 1: Safety requirements for design, manufacture and ins...

  EN 62423:2012/A12:2022

Type F and type B residual current operated circuit-breakers with and without integral ove...

  EN 301 908-10 V4.3.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 10: Base Sta...

  EN 301 908-13 V13.2.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved ...

  EN 300 422-1 V2.2.1

Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Audio PMSE Equipment up to 3 GHz; Ha...

  EN 303 213-5-2 V1.1.1

Advanced Surface Movement Guidance and Control System (A-SMGCS); Part 5: Harmonised Standa...

  EN 303 345-2 V1.2.1

Broadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for acc...

  EN 303 363-1 V1.1.1

Air Traffic Control Surveillance Radar Sensors; Secondary Surveillance Radar (SSR); Harmon...

  EN 303 347-1 V2.1.1

Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 1: Meteorolo...

  EN 303 347-2 V2.1.1

Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 2: Meteorolo...

  EN 303 345-5 V1.2.1

Broadcast Sound Receivers; Part 5: DRM broadcast sound service; Harmonised Standard for ac...

  EN 303 347-3 V2.1.1

Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 3: Meteorolo...

  EN 300 674-2-1 V3.1.1

Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmi...

  EN 301 025 V2.3.1

VHF radiotelephone equipment for general communications and associated equipment for Class...

  EN 301 489-12 V3.2.1

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Sp...

  EN 301 489-20 V2.2.1

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Sp...

  EN 301 489-52 V1.2.1

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 52: Spe...

  EN 285:2015+A1:2021

Sterilization - Steam sterilizers - Large sterilizers

  EN ISO 10993-9:2021

Biological evaluation of medical devices - Part 9: Framework for identification and quanti...

  EN ISO 10993-12:2021

Biological evaluation of medical devices - Part 12: Sample preparation and reference mater...

  EN ISO 10993-23:2021

Biological evaluation of medical devices - Part 23: Tests for irritation (ISO 10993-23:202...

  EN ISO 11135:2014

Sterilization of health-care products - Ethylene oxide - Requirements for the development,...

  EN ISO 11135:2014/A1:2019

Sterilization of health-care products - Ethylene oxide - Requirements for the development,...

  EN ISO 11137-1:2015

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11137-1:2015/A2:2019

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11737-1:2018

Sterilization of health care products - Microbiological methods - Part 1: Determination of...

  EN ISO 11737-1:2018/A1:2021

Sterilization of health care products - Microbiological methods - Part 1: Determination of...

  EN ISO 11737-2:2020

Sterilization of health care products - Microbiological methods - Part 2: Tests of sterili...

  EN ISO 13408-6:2021

Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2021)

  EN ISO 13485:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 13485:2016/A11:2021

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 13485:2016/AC:2018

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 14160:2021

Sterilization of health care products - Liquid chemical sterilizing agents for single-use ...

  EN ISO 14971:2019

Medical devices - Application of risk management to medical devices (ISO 14971:2019)

  EN ISO 14971:2019/A11:2021

Medical devices - Application of risk management to medical devices (ISO 14971:2019)

  EN ISO 15223-1:2021

Medical devices - Symbols to be used with information to be supplied by the manufacturer -...

  EN ISO 17664-1:2021

Processing of health care products - Information to be provided by the medical device manu...

  EN ISO 25424:2019

Sterilization of health care products - Low temperature steam and formaldehyde - Requireme...

  EN IEC 60601-2-83:2020

Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and...

  EN IEC 60601-2-83:2020/A11:2021

Medical electrical equipment - Part 2-83: Particular requirements for the basic safety and...

  EN ISO 11135:2014

Sterilization of health-care products - Ethylene oxide - Requirements for the development,...

  EN ISO 11135:2014/A1:2019

Sterilization of health-care products - Ethylene oxide - Requirements for the development,...

  EN ISO 11137-1:2015

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11137-1:2015/A2:2019

Sterilization of health care products - Radiation - Part 1: Requirements for development, ...

  EN ISO 11737-1:2018

Sterilization of health care products - Microbiological methods - Part 1: Determination of...

  EN ISO 11737-1:2018/A1:2021

Sterilization of health care products - Microbiological methods - Part 1: Determination of...

  EN ISO 11737-2:2020

Sterilization of health care products - Microbiological methods - Part 2: Tests of sterili...

  EN ISO 13408-6:2021

Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2021)

  EN ISO 13485:2016

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 13485:2016/A11:2021

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 13485:2016/AC:2018

Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 1...

  EN ISO 14971:2019

Medical devices - Application of risk management to medical devices (ISO 14971:2019)

  EN ISO 14971:2019/A11:2021

Medical devices - Application of risk management to medical devices (ISO 14971:2019)

  EN ISO 15223-1:2021

Medical devices - Symbols to be used with information to be supplied by the manufacturer -...

  EN ISO 17511:2021

In vitro diagnostic medical devices - Requirements for establishing metrological traceabil...

  EN ISO 25424:2019

Sterilization of health care products - Low temperature steam and formaldehyde - Requireme...

  EN ISO 6185-1:2001

Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2...

  EN ISO 6185-1:2018

Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2...

  EN ISO 6185-2:2001

Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW incl...

  EN ISO 6185-2:2018

Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW incl...

  EN ISO 6185-3:2014

Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 1...

  EN ISO 6185-3:2018

Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 1...

  EN ISO 6185-4:2011

Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor p...

  EN ISO 6185-4:2018

Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor p...

  EN ISO 7840:2013

Small craft - Fire-resistant fuel hoses (ISO 7840:2013)

  EN ISO 7840:2018

Small craft - Fire-resistant fuel hoses (ISO 7840:2013)

  EN ISO 7840:2021

Small craft - Fire-resistant fuel hoses (ISO 7840:2021)

  EN ISO 8099-1:2018

Small craft - Waste systems - Part 1: Waste water retention (ISO 8099-1:2018)

  EN ISO 8099-2:2021

Small craft - Waste systems - Part 2: Sewage treatment systems (ISO 8099-2:2020)

  EN ISO 8469:2013

Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013)

  EN ISO 8469:2018

Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013)

  EN ISO 8469:2021

Small craft - Non-fire-resistant fuel hoses (ISO 8469:2021)

  EN ISO 8665:2006

Small craft - Marine propulsion reciprocating internal combustion engines - Power measurem...

  EN ISO 8665:2017

Small craft - Marine propulsion reciprocating internal combustion engines - Power measurem...

  EN ISO 8666:2002

Small craft - Principal data (ISO 8666:2002)

  EN ISO 8666:2018

Small craft - Principal data (ISO 8666:2016)

  EN ISO 8666:2020

Small craft - Principal data (ISO 8666:2020)

  EN ISO 8666:2020/A11:2021

Small craft - Principal data (ISO 8666:2020)

  EN ISO 8846:2017

Small craft - Electrical devices - Protection against ignition of surrounding flammable ga...

  EN ISO 8847:2004

Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)

  EN ISO 8847:2004/AC:2005

Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)

  EN ISO 8847:2017

Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004)

  EN ISO 8847:2021

Small craft - Steering gear - Cable over pulley systems (ISO 8847:2021)

  EN ISO 8848:2017

Small craft - Remote steering systems (ISO 8848:1990)

  EN ISO 8849:2003

Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003)

  EN ISO 8849:2018

Small craft - Electrically operated direct-current bilge pumps (ISO 8849:2003)

  EN ISO 8849:2021

Small craft - Electrically operated bilge pumps (ISO 8849:2020)

  EN ISO 9093:2021

Small craft - Seacocks and through-hull fittings (ISO 9093:2020)

  EN ISO 9093-1:1997

Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)

  EN ISO 9093-1:2018

Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994)

  EN ISO 9093-2:2002

Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)

  EN ISO 9093-2:2018

Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002)

  EN ISO 9094:2017

Small craft - Fire protection (ISO 9094:2015)

  EN ISO 9097:1994

Small craft - Electric fans (ISO 9097:1991)

  EN ISO 9097:1994/A1:2000

Small craft - Electric fans (ISO 9097:1991)

  EN ISO 9097:2017

Small craft - Electric fans (ISO 9097:1991)

  EN ISO 9775:2017

Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (...

  EN ISO 10087:2019

Small craft - Craft identification - Coding system (ISO 10087:2019)

  EN ISO 10087:2022

Small craft - Craft identification - Coding system (ISO 10087:2022)

  EN ISO 10088:2013

Small craft - Permanently installed fuel systems (ISO 10088:2013)

  EN ISO 10088:2017

Small craft - Permanently installed fuel systems (ISO 10088:2013)

  EN ISO 10133:2012

Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)

  EN ISO 10133:2017

Small craft - Electrical systems - Extra-low-voltage d.c. installations (ISO 10133:2012)

  EN ISO 10239:2014

Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)

  EN ISO 10239:2017

Small craft - Liquefied petroleum gas (LPG) systems (ISO 10239:2014)

  EN ISO 10592:1995

Small craft - Hydraulic steering systems (ISO 10592:1994)

  EN ISO 10592:1995/A1:2000

Small craft - Hydraulic steering systems (ISO 10592:1994)

  EN ISO 10592:2017

Small craft - Hydraulic steering systems (ISO 10592:1994)

  EN ISO 11105:1997

Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997...

  EN ISO 11105:2017

Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997...

  EN ISO 11105:2020

Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:2020...

  EN ISO 11192:2005

Small craft - Graphical symbols (ISO 11192:2005)

  EN ISO 11192:2018

Small craft - Graphical symbols (ISO 11192:2005)

  EN ISO 11547:1995

Small craft - Start-in-gear protection (ISO 11547:1994)

  EN ISO 11547:1995/A1:2000

Small craft - Start-in-gear protection (ISO 11547:1994)

  EN ISO 11547:2018

Small craft - Start-in-gear protection (ISO 11547:1994)

  EN ISO 11592:2001

Small craft less than 8 m length of hull - Determination of maximum propulsion power ratin...

  EN ISO 11592-1:2016

Small craft - Determination of maximum propulsion power rating using manoeuvring speed - P...

  EN ISO 11592-2:2021

Small craft - Determination of maximum propulsion power rating using manoeuvring speed - P...

  EN ISO 11812:2001

Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)

  EN ISO 11812:2018

Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001)

  EN ISO 12215-1:2000

Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, ...

  EN ISO 12215-1:2018

Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, ...

  EN ISO 12215-2:2002

Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for san...

  EN ISO 12215-2:2018

Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for san...

  EN ISO 12215-3:2002

Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloy...

  EN ISO 12215-3:2018

Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloy...

  EN ISO 12215-4:2002

Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 1...

  EN ISO 12215-4:2018

Small craft - Hull construction and scantlings - Part 4: Workshop and manufacturing (ISO 1...

  EN ISO 12215-5:2008

Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, d...

  EN ISO 12215-5:2008/A1:2014

Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, d...

  EN ISO 12215-5:2018

Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, d...

  EN ISO 12215-5:2019

Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, d...

  EN ISO 12215-6:2008

Small craft - Hull construction and scantlings - Part 6: Structural arrangements and detai...

  EN ISO 12215-6:2018

Small craft - Hull construction and scantlings - Part 6: Structural arrangements and detai...

  EN ISO 12215-8:2009

Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009)

  EN ISO 12215-8:2009/AC:2010

Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009)

  EN ISO 12215-8:2018

Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009, includ...

  EN ISO 12215-9:2012

Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 122...

  EN ISO 12215-9:2018

Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 122...

  EN ISO 12216:2002

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertight...

  EN ISO 12216:2018

Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertight...

  EN ISO 12217-1:2015

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing b...

  EN ISO 12217-1:2017

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing b...

  EN ISO 12217-2:2015

Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats...

  EN ISO 12217-2:2017

Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats...

  EN ISO 12217-3:2015

Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull...

  EN ISO 12217-3:2017

Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull...

  EN ISO 13297:2014

Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)

  EN ISO 13297:2018

Small craft - Electrical systems - Alternating current installations (ISO 13297:2014)

  EN ISO 13590:2003

Small craft - Personal watercraft - Construction and system installation requirements (ISO...

  EN ISO 13590:2003/AC:2004

Small craft - Personal watercraft - Construction and system installation requirements (ISO...

  EN ISO 13590:2018

Small craft - Personal watercraft - Construction and system installation requirements (ISO...

  EN ISO 13929:2017

Small craft - Steering gear - Geared link systems (ISO 13929:2001)

  EN ISO 14509-1:2008

Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measu...

  EN ISO 14509-1:2018

Small craft - Airborne sound emitted by powered recreational craft - Part 1: Pass-by measu...

  EN ISO 14509-3:2009

Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessm...

  EN ISO 14509-3:2018

Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessm...

  EN ISO 14895:2003

Small craft - Liquid-fuelled galley stoves (ISO 14895:2000)

  EN ISO 14895:2016

Small craft - Liquid-fuelled galley stoves and heating appliances (ISO 14895:2016)

  EN ISO 14945:2021

Small craft - Builder's plate (ISO 14945:2021)

  EN ISO 14946:2001

Small craft - Maximum load capacity (ISO 14946:2001)

  EN ISO 14946:2001/AC:2005

Small craft - Maximum load capacity (ISO 14946:2001)

  EN ISO 14946:2021

Small craft - Maximum load capacity (ISO 14946:2021)

  EN ISO 15083:2003

Small craft - Bilge-pumping systems (ISO 15083:2003)

  EN ISO 15083:2018

Small craft - Bilge-pumping systems (ISO 15083:2003)

  EN ISO 15084:2003

Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)

  EN ISO 15084:2018

Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)

  EN ISO 15085:2003

Small craft - Man-overboard prevention and recovery (ISO 15085:2003)

  EN ISO 15085:2003/A1:2009

Small craft - Man-overboard prevention and recovery (ISO 15085:2003)

  EN ISO 15085:2003/A2:2018

Small craft - Man-overboard prevention and recovery (ISO 15085:2003)

  EN ISO 15584:2001

Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO ...

  EN ISO 15584:2017

Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components (ISO ...

  EN 15609:2012

LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft

  EN 15609:2021

LPG equipment and accessories - LPG propulsion systems for boats, yachts and other watercr...

  EN ISO 15652:2005

Small craft - Remote steering systems for inboard mini jet boats (ISO 15652:2003)

  EN ISO 15652:2017

Small craft - Remote steering systems for inboard mini jet boats (ISO 15652:2003)

  EN ISO 16147:2002

Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO ...

  EN ISO 16147:2002/A1:2013

Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO ...

  EN ISO 16147:2017

Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components (ISO ...

  EN ISO 16147:2021

Small craft - Inboard diesel engines - Engine-mounted fuel, oil and electrical components ...

  EN ISO 16180:2013

Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013)

  EN ISO 16180:2018

Small craft - Navigation lights - Installation, placement and visibility (ISO 16180:2013)

  EN ISO 16315:2016

Small craft - Electric propulsion system (ISO 16315:2016)

  EN ISO 18854:2015

Small craft - Reciprocating internal combustion engines exhaust emission measurement - Tes...

  EN ISO 19009:2015

Small craft - Electric navigation lights - Performance of LED lights (ISO 19009:2015)

  EN ISO 21487:2012

Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012)

  EN ISO 21487:2012/A1:2014

Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012)

  EN ISO 21487:2012/A2:2015

Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012)

  EN ISO 21487:2018

Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012, includin...

  EN ISO 23411:2021

Small craft - Steering wheels (ISO 23411:2020)

  EN ISO 25197:2012

Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO ...

  EN ISO 25197:2012/A1:2014

Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO ...

  EN ISO 25197:2018

Small craft - Electrical/electronic control systems for steering, shift and throttle (ISO ...

  EN 28846:1993

Small craft - Electrical devices - Protection against ignition of surrounding flammable ga...

  EN 28846:1993/A1:2000

Small craft - Electrical devices - Protection against ignition of surrounding flammable ga...

  EN 28848:1993

Small craft - Remote steering systems (ISO 8848:1990)

  EN 28848:1993/A1:2000

Small craft - Remote steering systems (ISO 8848:1990)

  EN 29775:1993

Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (...

  EN 29775:1993/A1:2000

Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (...

  EN 60092-507:2015

Electrical installations in ships - Part 507 - Small vessels

  EN ISO 10993-10:2023

Biological evaluation of medical devices - Part 10: Tests for skin sensitization (ISO 1099...

  EN ISO 25424:2019/A1:2022

Sterilization of health care products - Low temperature steam and formaldehyde - Requireme...

  EN ISO 25424:2019/A1:2022

Sterilization of health care products - Low temperature steam and formaldehyde - Requireme...

  EN 349:1993+A1:2008

Safety of machinery - Minimum gaps to avoid crushing of parts of the human body

  EN 547-1:1996+A1:2008

Safety of machinery - Human body measurements - Part 1: Principles for determining the dim...

  EN 547-2:1996+A1:2008

Safety of machinery - Human body measurements - Part 2: Principles for determining the dim...

  EN 547-3:1996+A1:2008

Safety of machinery - Human body measurements - Part 3: Anthropometric data

  EN 574:1996+A1:2008

Safety of machinery - Two-hand control devices - Functional aspects - Principles for desig...

  EN 614-1:2006+A1:2009

Safety of machinery - Ergonomic design principles - Part 1: Terminology and general princi...

  EN 614-2:2000+A1:2008

Safety of machinery - Ergonomic design principles - Part 2: Interactions between the desig...

  EN 842:1996+A1:2008

Safety of machinery - Visual danger signals - General requirements, design and testing

  EN 894-1:1997+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actua...

  EN 894-2:1997+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actua...

  EN 894-3:2000+A1:2008

Safety of machinery - Ergonomics requirements for the design of displays and control actua...

  EN 981:1996+A1:2008

Safety of machinery - System of auditory and visual danger and information signals

  EN 1005-1:2001+A1:2008

Safety of machinery - Human physical performance - Part 1: Terms and definitions

  EN 1005-2:2003+A1:2008

Safety of machinery - Human physical performance - Part 2: Manual handling of machinery an...

  EN 1005-3:2002+A1:2008

Safety of machinery - Human physical performance - Part 3: Recommended force limits for ma...

  EN 1005-4:2005+A1:2008

Safety of machinery - Human physical performance - Part 4: Evaluation of working postures ...

  EN 1032:2003+A1:2008

Mechanical vibration - Testing of mobile machinery in order to determine the vibration emi...

  EN 1093-2:2006+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2...

  EN 1093-3:2006+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 3...

  EN 1093-4:1996+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4...

  EN 1093-6:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6...

  EN 1093-7:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7...

  EN 1093-8:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 8...

  EN 1093-9:1998+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9...

  EN 1093-11:2001+A1:2008

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1...

  EN 1299:1997+A1:2008

Mechanical vibration and shock - Vibration isolation of machines - Information for the app...

  EN 1837:1999+A1:2009

Safety of machinery - Integral lighting of machines

  EN 12198-1:2000+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by ...

  EN 12198-2:2002+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by ...

  EN 12198-3:2002+A1:2008

Safety of machinery - Assessment and reduction of risks arising from radiation emitted by ...

  EN 13490:2001+A1:2008

Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of oper...

  EN 15967:2022

Determination of maximum explosion pressure and the maximum rate of pressure rise of gases...

  EN 17624:2022

Determination of explosion limits of gases and vapours at elevated pressures, elevated tem...

  EN 81-3:2000+A1:2008

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraul...

  EN 81-3:2000+A1:2008/AC:2009

Safety rules for the construction and installation of lifts - Part 3: Electric and hydraul...

  EN 267:2009+A1:2011

Automatic forced draught burners for liquid fuels

  EN 280:2013+A1:2015

Mobile elevating work platforms - Design calculations - Stability criteria - Construction ...

  EN 280-1:2022

Mobile elevating work platforms - Part 1: Design calculations - Stability criteria - Const...

  EN 280-2:2022

Mobile elevating work platforms - Part 2: Additional safety requirements for load lifting ...

  EN 303-5:2021+A1:2022

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stok...

  EN 415-3:2021

Safety of packaging machines - Part 3: Form, fill and seal machines; fill and seal machine...

  EN 415-3:1999+A1:2009

Safety of packaging machines - Part 3: Form, fill and seal machines

  EN 415-5:2006+A1:2009

Safety of packaging machines - Part 5: Wrapping machines

  EN 415-7:2006+A1:2008

Safety of packaging machines - Part 7: Group and secondary packaging machines

  EN 474-1:2022

Earth-moving machinery - Safety - Part 1: General requirements

  EN 474-1:2006+A4:2013

Earth-moving machinery - Safety - Part 1: General requirements

  EN 474-1:2006+A4:2013/AC:2014

Earth-moving machinery - Safety - Part 1: General requirements

  EN 474-2:2022

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

  EN 474-2:2006+A1:2008

Earth-moving machinery - Safety - Part 2: Requirements for tractor-dozers

  EN 474-3:2022

Earth-moving machinery - Safety - Part 3: Requirements for loaders

  EN 474-3:2022/AC:2022

Earth-moving machinery - Safety - Part 3: Requirements for loaders

  EN 474-3:2006+A1:2009

Earth-moving machinery - Safety - Part 3: Requirements for loaders

  EN 474-4:2022

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

  EN 474-4:2006+A2:2012

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

  EN 474-5:2006+A1:2009+A2:2012

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

  EN 474-5:2006+A3:2013

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

  EN 474-5:2022

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

  EN 474-5:2022/AC:2022

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

  EN 474-6:2022

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

  EN 474-6:2006+A1:2009

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

  EN 474-7:2022

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

  EN 474-7:2006+A1:2009

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

  EN 474-8:2022

Earth-moving machinery - Safety - Part 8: Requirements for graders

  EN 474-8:2006+A1:2009

Earth-moving machinery - Safety - Part 8: Requirements for graders

  EN 474-9:2022

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

  EN 474-9:2006+A1:2009

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

  EN 474-10:2022

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

  EN 474-10:2006+A1:2009

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

  EN 474-11:2022

Earth-moving machinery - Safety - Part 11: Requirements for earth- and landfill compactors

  EN 474-11:2006+A1:2008

Earth-moving machinery - Safety - Part 11: Requirements for earth and landfill compactors

  EN 474-12:2022

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

  EN 474-12:2006+A1:2008

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

  EN 474-13:2022

Earth-moving machinery - Safety - Part 13: Requirements for rollers

  EN 500-1:2006+A1:2009

Mobile road construction machinery - Safety - Part 1: Common requirements

  EN 500-2:2006+A1:2008

Mobile road construction machinery - Safety - Part 2: Specific requirements for road-milli...

  EN 500-3:2006+A1:2008

Mobile road construction machinery - Safety - Part 3: Specific requirements for soil-stabi...

  EN 500-6:2006+A1:2008

Mobile road construction machinery - Safety - Part 6: Specific requirements for paver-fini...

  EN 528:2021+A1:2022

Rail dependent storage and retrieval equipment - Safety requirements for S/R machines

  EN 609-2:1999+A1:2009

Agricultural and forestry machinery - Safety of log splitters - Part 2: Screw splitters

  EN 617:2001+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for the equipment ...

  EN 618:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 619:2022

Continuous handling equipment and systems - Safety requirements for equipment for mechanic...

  EN 619:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for equipment for ...

  EN 620:2021

Continuous handling equipment and systems - Safety requirements for fixed belt conveyors f...

  EN 620:2002+A1:2010

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt con...

  EN 676:2003+A2:2008

Automatic forced draught burners for gaseous fuels

  EN 676:2003+A2:2008/AC:2008

Automatic forced draught burners for gaseous fuels

  EN 703:2021

Agricultural machinery - Safety - Silage loading, mixing and/or chopping and distributing ...

  EN 703:2004+A1:2009

Agricultural machinery - Silage loading, mixing and/or chopping and distributing machines ...

  EN 706:1996+A1:2009

Agricultural machinery - Vine shoot tipping machines - Safety

  EN 707:1999+A1:2009

Agricultural machinery - Slurry tankers - Safety

  EN 709:1997+A4:2009

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary c...

  EN 709:1997+A4:2009/AC:2012

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary c...

  EN 710:1997+A1:2010

Safety requirements for foundry moulding and coremaking machinery and plant associated equ...

  EN 710:1997+A1:2010/AC:2012

Safety requirements for foundry moulding and coremaking machinery and plant associated equ...

  EN 741:2000+A1:2010

Continuous handling equipment and systems - Safety requirements for systems and their comp...

  EN 746-1:1997+A1:2009

Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial ...

  EN 746-3:2021

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and...

  EN 746-3:1997+A1:2009

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and...

  EN 792-13:2000+A1:2008

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools

  EN 809:1998+A1:2009

Pumps and pump units for liquids - Common safety requirements

  EN 809:1998+A1:2009/AC:2010

Pumps and pump units for liquids - Common safety requirements

  EN 818-1:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance

  EN 818-2:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain ...

  EN 818-3:1999+A1:2008

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain ...

  EN 818-4:1996+A1:2008

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

  EN 818-5:1999+A1:2008

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

  EN 818-6:2000+A1:2008

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for ...

  EN 818-7:2002+A1:2008

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade...

  EN 848-2:2007+A2:2012

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: S...

  EN 859:2007+A2:2012

Safety of woodworking machines - Hand fed surface planing machines

  EN 860:2007+A2:2012

Safety of woodworking machines - One side thickness planing machines

  EN 861:2007+A2:2012

Safety of woodworking machines - Surface planing and thicknessing machines

  EN 869:2006+A1:2009

Safety of machinery - Safety requirements for pressure metal diecasting units

  EN 908:1999+A1:2009

Agricultural and forestry machinery - Reel machines for irrigation - Safety

  EN 909:1998+A1:2009

Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation mac...

  EN 930:1997+A2:2009

Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring,...

  EN 931:1997+A2:2009

Footwear manufacturing machines - Lasting machines - Safety requirements

  EN 940:2009+A1:2012

Safety of woodworking machines - Combined woodworking machines

  EN 957-6:2010+A1:2014

Stationary training equipment - Part 6: Treadmills, additional specific safety requirement...

  EN 972:1998+A1:2010

Tannery machines - Reciprocating roller machines - Safety requirements

  EN 972:1998+A1:2010/AC:2011

Tannery machines - Reciprocating roller machines - Safety requirements

  EN 1010-1:2004+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-2:2006+A1:2010

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-3:2002+A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1010-4:2004+A1:2009

Safety of machinery - Safety requirements for the design and construction of printing and ...

  EN 1012-2:1996+A1:2009

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

  EN 1028-1:2002+A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification...

  EN 1028-2:2002+A1:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 2: Verification o...

  EN 1034-1:2000+A1:2010

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-2:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-4:2021

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-4:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-5:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-6:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-7:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-13:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-14:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1034-22:2005+A1:2009

Safety of machinery - Safety requirements for the design and construction of paper making ...

  EN 1114-3:2001+A1:2008

Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements...

  EN 1175-1:1998+A1:2010

Safety of industrial trucks - Electrical requirements - Part 1: General requirements for b...

  EN 1175-2:1998+A1:2010

Safety of industrial trucks - Electrical requirements - Part 2: General requirements of in...

  EN 1175-3:1998+A1:2010

Safety of industrial trucks - Electrical requirements - Part 3: Specific requirements for ...

  EN 1218-1:1999+A1:2009

Safety of woodworking machines - Tenoning machines - Part 1: Single end tenoning machines ...

  EN 1218-2:2004+A1:2009

Safety of woodworking machines - Tenoning machines - Part 2: Double end tenoning and/or pr...

  EN 1218-3:2001+A1:2009

Safety of woodworking machines - Tenoning machines - Part 3: Hand fed tenoning machines wi...

  EN 1218-5:2004+A1:2009

Safety of woodworking machines - Tenoning machines - Part 5: One side profiling machines w...

  EN 1247:2004+A1:2010

Foundry machinery - Safety requirements for ladles, pouring equipment, centrifugal casting...

  EN 1248:2001+A1:2009

Foundry machinery - Safety requirements for abrasive blasting equipment

  EN 1265:1999+A1:2008

Safety of machinery - Noise test code for foundry machines and equipment

  EN 1374:2000+A1:2010

Agricultural machinery - Silos stationary unloaders for round silos - Safety

  EN 1492-1:2000+A1:2008

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for ge...

  EN 1492-2:2000+A1:2008

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose ...

  EN 1492-4:2004+A1:2008

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and...

  EN 1494:2000+A1:2008

Mobile or movable jacks and associated lifting equipment

  EN 1495:1997+A2:2009

Lifting platforms - Mast climbing work platforms

  EN 1495:1997+A2:2009/AC:2010

Lifting platforms - Mast climbing work platforms

  EN 1501-1:2011+A1:2015

Refuse collection vehicles - General requirements and safety requirements - Part 1: Rear l...

  EN 1501-2:2005+A1:2009

Refuse collection vehicles and associated lifting devices - General requirements and safet...

  EN 1526:1997+A1:2008

Safety of industrial trucks - Additional requirements for automated functions on trucks

  EN 1547:2001+A1:2009

Industrial thermoprocessing equipment - Noise test code for industrial thermoprocessing eq...

  EN 1550:1997+A1:2008

Machine-tools safety - Safety requirements for the design and construction of work holding...

  EN 1570-1:2011+A1:2014

Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed la...

  EN 1612-1:1997+A1:2008

Plastics and rubber machines - Reaction moulding machines - Part 1: Safety requirements fo...

  EN 1672-2:2005+A1:2009

Food processing machinery - Basic concepts - Part 2: Hygiene requirements

  EN 1673:2000+A1:2009

Food processing machinery - Rotary rack ovens - Safety and hygiene requirements

  EN 1677-1:2000+A1:2008

Components for slings - Safety - Part 1: Forged steel components, Grade 8

  EN 1677-2:2000+A1:2008

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8

  EN 1677-3:2001+A1:2008

Components for slings - Safety - Part 3: Forged steel self-locking hooks - Grade 8

  EN 1677-4:2000+A1:2008

Components for slings - Safety - Part 4: Links, Grade 8

  EN 1677-5:2001+A1:2008

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

  EN 1677-6:2001+A1:2008

Components for slings - Safety - Part 6: Links - Grade 4

  EN 1678:1998+A1:2010

Food processing machinery - Vegetable cutting machines - Safety and hygiene requirements

  EN 1679-1:1998+A1:2011

Reciprocating internal combustion engines - Safety - Part 1: Compression ignition engines

  EN 1710:2005+A1:2008

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 1710:2005+A1:2008/AC:2010

Equipment and components intended for use in potentially explosive atmospheres in undergro...

  EN 1755:2000+A2:2013

Safety of industrial trucks - Operation in potentially explosive atmospheres - Use in flam...

  EN 1756-1:2001+A1:2008

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part ...

  EN 1756-2:2004+A1:2009

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part ...

  EN 1804-1:2001+A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1804-2:2001+A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1804-3:2006+A1:2010

Machines for underground mines - Safety requirements for hydraulic powered roof supports -...

  EN 1846-2:2009+A1:2013

Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and perfor...

  EN 1870-3:2001+A1:2009

Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut...

  EN 1870-5:2002+A2:2012

Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up...

  EN 1870-13:2007+A2:2012

Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel...

  EN 1870-17:2012+A1:2015

Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cut...

  EN 1889-2:2003+A1:2009

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Ra...

  EN 1915-2:2001+A1:2009

Aircraft ground support equipment - General requirements - Part 2: Stability and strength ...

  EN 1915-3:2004+A1:2009

Aircraft ground support equipment - General requirements - Part 3: Vibration measurement m...

  EN 1915-4:2004+A1:2009

Aircraft ground support equipment - General requirements - Part 4: Noise measurement metho...

  EN 1974:1998+A1:2009

Food processing machinery - Slicing machines - Safety and hygiene requirements

  EN ISO 3691-6:2021

Industrial trucks - Safety requirements and verification - Part 6: Burden and personnel ca...

  EN ISO 4254-1:2015/A1:2021

Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

  EN ISO 4254-6:2020

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO...

  EN ISO 4254-6:2020/A11:2021

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO...

  EN ISO 4254-17:2022

Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)

  EN ISO 8528-10:2022

Reciprocating internal combustion engine driven alternating current generating sets - Part...

  EN ISO 11680-1:2021

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners ...

  EN ISO 11680-2:2021

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners ...

  EN ISO 11681-1:2022

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chai...

  EN ISO 11681-2:2022

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 2: Chai...

  EN ISO 11806-1:2022

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-h...

  EN ISO 11806-2:2022

Agricultural and forestry machinery - Safety requirements and testing for portable, hand-h...

  EN ISO 11850:2011/A2:2022

Machinery for forestry - General safety requirements (ISO 11850:2011)

  EN 12012-1:2007+A1:2008

Plastics and rubber machines - Size reduction machines - Part 1: Safety requirements for b...

  EN 12012-3:2001+A1:2008

Plastics and rubber machines - Size reduction machines - Part 3: Safety requirements for s...

  EN 12012-4:2006+A1:2008

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for a...

  EN 12012-4:2019+A1:2021

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for a...

  EN 12044:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Cutting and punchin...

  EN 12053:2001+A1:2008

Safety of industrial trucks - Test methods for measuring noise emissions

  EN 12077-2:1998+A1:2008

Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devic...

  EN 12158-1:2021

Builders' hoists for goods - Part 1: Hoists with accessible platforms

  EN 12158-1:2000+A1:2010

Builders' hoists for goods - Part 1: Hoists with accessible platforms

  EN 12158-2:2000+A1:2010

Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying dev...

  EN 12162:2001+A1:2009

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

  EN 12203:2003+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather pr...

  EN 12267:2003+A1:2010

Food processing machinery - Circular saw machines - Safety and hygiene requirements

  EN 12301:2019/AC:2021

Plastics and rubber machines - Calenders - Safety requirements

  EN 12301:2000+A1:2008

Plastics and rubber machines - Calenders - Safety requirements

  EN 12312-5:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equi...

  EN 12312-7:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 7: Air-craft movement equ...

  EN 12312-8:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 8: Maintenance stairs and...

  EN 12312-10:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 10: Container/Pallet tran...

  EN 12312-15:2006+A1:2009

Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment...

  EN 12312-16:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 16: Air start equipment

  EN 12312-17:2004+A1:2009

Aircraft ground support equipment - Specific requirements - Part 17: Air conditioning equi...

  EN 12312-18:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen un...

  EN 12312-19:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 19: Aircraft jacks, axle ...

  EN 12312-20:2005+A1:2009

Aircraft ground support equipment - Specific requirements - Part 20: Electrical ground pow...

  EN 12321:2003+A1:2009

Underground mining machinery - Specification for the safety requirements of armoured face ...

  EN 12331:2003+A2:2010

Food processing machinery - Mincing machines - Safety and hygiene requirements

  EN 12331:2021

Food processing machinery - Mincing machines - Safety and hygiene requirements

  EN 12348:2000+A1:2009

Core drilling machines on stand - Safety

  EN 12355:2022

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety a...

  EN 12355:2003+A1:2010

Food processing machinery - Derinding-, skinning- and membrane removal machines - Safety a...

  EN 12385-1:2002+A1:2008

Steel wire ropes - Safety - Part 1: General requirements

  EN 12385-2:2002+A1:2008

Steel wire ropes - Safety - Part 2: Definitions, designation and classification

  EN 12385-3:2004+A1:2008

Steel wire ropes - Safety - Part 3: Information for use and maintenance

  EN 12385-4:2002+A1:2008

Steel wire ropes - Safety - Part 4: Stranded ropes for general lifting applications

  EN 12385-5:2021/AC:2021

Steel wire ropes - Safety - Part 5: Stranded ropes for lifts

  EN 12385-10:2003+A1:2008

Steel wire ropes - Safety - Part 10: Spiral ropes for general structural applications

  EN 12387:2005+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair...

  EN 12409:2008+A1:2011

Plastics and rubber machines - Thermoforming machines - Safety requirements

  EN 12417:2001+A2:2009

Machine tools - Safety - Machining centres

  EN 12417:2001+A2:2009/AC:2010

Machine tools - Safety - Machining centres

  EN 12418:2021

Masonry and stone cutting-off machines for job site - Safety

  EN 12418:2000+A1:2009

Masonry and stone cutting-off machines for job site - Safety

  EN 12453:2017+A1:2021

Industrial, commercial and garage doors and gates - Safety in use of power operated doors ...

  EN 12463:2004+A1:2011

Food processing machinery - Filling machines and auxiliary machines - Safety and hygiene r...

  EN 12505:2000+A1:2009

Food processing machinery - Centrifugal machines for processing edible oils and fats - Saf...

  EN 12525:2000+A2:2010

Agricultural machinery - Front loaders - Safety

  EN 12545:2000+A1:2009

Footwear, leather and imitation leather goods manufacturing machines - Noise test code - C...

  EN 12549:1999+A1:2008

Acoustics - Noise test code for fastener driving tools - Engineering method

  EN 12581:2005+A1:2010

Coating plants - Machinery for dip coating and electrodeposition of organic liquid coating...

  EN 12621:2006+A1:2010

Machinery for the supply and circulation of coating materials under pressure - Safety requ...

  EN 12622:2009+A1:2013

Safety of machine tools - Hydraulic press brakes

  EN 12629-1:2000+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-2:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-3:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-4:2001+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-1:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-2:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-3:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-5-4:2003+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-6:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-7:2004+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12629-8:2002+A1:2010

Machines for the manufacture of constructional products from concrete and calcium-silicate...

  EN 12635:2002+A1:2008

Industrial, commercial and garage doors and gates - Installation and use

  EN 12644-1:2001+A1:2008

Cranes - Information for use and testing - Part 1: Instructions

  EN 12644-2:2000+A1:2008

Cranes - Information for use and testing - Part 2: Marking

  EN 12649:2008+A1:2011

Concrete compactors and smoothing machines - Safety

  EN 12653:1999+A2:2009

Footwear, leather and imitation leather manufacturing machines - Nailing machines - Safety...

  EN 12717:2001+A1:2009

Safety of machine tools - Drilling machines

  EN 12733:2001+A1:2009

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

  EN 12753:2005+A1:2010

Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety require...

  EN 12757-1:2005+A1:2010

Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery fo...

  EN 12852:2001+A1:2010

Food processing machinery - Food processors and blenders - Safety and hygiene requirements

  EN 12853:2001+A1:2010

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirement...

  EN 12853:2001+A1:2010/AC:2010

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirement...

  EN 12854:2003+A1:2010

Food processing machinery - Beam mixers - Safety and hygiene requirements

  EN 12855:2003+A1:2010

Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

  EN 12881-2:2005+A1:2008

Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

  EN 12921-1:2005+A1:2010

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapou...

  EN 12921-2:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapou...

  EN 12921-3:2005+A1:2008

Machines for surface cleaning and pre-treatment of industrial items using liquids or vapou...

  EN 12921-4:2005+A1:2008

Machines for surface cleaning and pretreatment of industrial items using liquids and vapou...

  EN 12965:2003+A2:2009

Tractors and machinery for agriculture and forestry - Power take-off (PTO) drive shafts an...

  EN 12978:2003+A1:2009

Industrial, commercial and garage doors and gates - Safety devices for power operated door...

  EN 12981:2005+A1:2009

Coating plants - Spray booths for application of organic powder coating material - Safety ...

  EN 12984:2005+A1:2010

Food processing machinery - Portable and/or hand-guided machines and appliances with mecha...

  EN 13000:2010+A1:2014

Cranes - Mobile cranes

  EN 13001-3-5:2016+A1:2021

Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cas...

  EN 13015:2001+A1:2008

Maintenance for lifts and escalators - Rules for maintenance instructions

  EN 13019:2001+A1:2008

Machines for road surface cleaning - Safety requirements

  EN 13021:2003+A1:2008

Winter service machines - Safety requirements

  EN 13023:2003+A1:2010

Noise measurement methods for printing, paper converting, paper making machines and auxili...

  EN 13035-3:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-3:2003+A1:2009/AC:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-4:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-5:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-6:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-7:2006+A1:2009

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-9:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13035-11:2006+A1:2010

Machines and plants for the manufacture, treatment and processing of flat glass - Safety r...

  EN 13042-1:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13042-2:2004+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13042-3:2007+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13042-5:2003+A1:2009

Machines and plants for the manufacture, treatment and processing of hollow glass - Safety...

  EN 13059:2002+A1:2008

Safety of industrial trucks - Test methods for measuring vibration

  EN 13102:2005+A1:2008

Ceramic machines - Safety - Loading and unloading of fine clay tiles

  EN 13112:2002+A1:2009

Tannery machines - Splitting and bandknife shearing machines - Safety requirements

  EN 13113:2002+A1:2010

Tannery machines - Roller coating machines - Safety requirements

  EN 13114:2002+A1:2009

Tannery machines - Rotating process vessels - Safety requirements

  EN 13118:2000+A1:2009

Agricultural machinery - Potato harvesting equipment - Safety

  EN 13120:2009+A1:2014

Internal blinds - Performance requirements including safety

  EN 13120:2009+A1:2014/AC:2015

Internal blinds - Performance requirements including safety

  EN 13128:2001+A2:2009

Safety of machine tools - Milling machines (including boring machines)

  EN 13128:2001+A2:2009/AC:2010

Safety of machine tools - Milling machines (including boring machines)

  EN 13140:2000+A1:2009

Agricultural machinery - Sugar beet and fodder beet harvesting equipment - Safety

  EN 13155:2003+A2:2009

Cranes - Safety - Non-fixed load lifting attachments

  EN 13157:2004+A1:2009

Cranes - Safety - Hand powered cranes

  EN 13208:2003+A1:2010

Food processing machinery - Vegetable peelers - Safety and hygiene requirements

  EN 13288:2005+A1:2009

Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene require...

  EN 13289:2001+A1:2013

Pasta processing plants - Dryers and coolers - Safety and hygiene requirements

  EN 13355:2004+A1:2009

Coating plants - Combined booths - Safety requirements

  EN 13367:2005+A1:2008

Ceramic machines - Safety - Transfer platforms and cars

  EN 13367:2005+A1:2008/AC:2009

Ceramic machines - Safety - Transfer platforms and cars

  EN 13378:2001+A1:2013

Pasta processing plants - Pasta presses - Safety and hygiene requirements

  EN 13379:2001+A1:2013

Pasta processing plants - Spreader, stripping and cutting machine, stick return conveyor, ...

  EN 13389:2005+A1:2009

Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirement...

  EN 13390:2002+A1:2009

Food processing machinery - Pie and tart machines - Safety and hygiene requirements

  EN 13411-1:2002+A1:2008

Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings

  EN 13411-2:2001+A1:2008

Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings

  EN 13411-3:2004+A1:2008

Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing

  EN 13411-5:2003+A1:2008

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

  EN 13411-6:2004+A1:2008

Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket

  EN 13411-7:2006+A1:2008

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

  EN 13414-1:2003+A2:2008

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

  EN 13414-2:2003+A2:2008

Steel wire rope slings - Safety - Part 2: Specification for information for use and mainte...

  EN 13414-3:2003+A1:2008

Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings

  EN 13448:2001+A1:2009

Agricultural and forestry machinery - Inter-row mowing units - Safety

  EN 13457:2004+A1:2010

Footwear, leather and imitation leather goods manufacturing machines - Splitting, skiving,...

  EN 13524:2003+A2:2014

Highway maintenance machines - Safety requirements

  EN 13531:2001+A1:2008

Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Lab...

  EN 13534:2006+A1:2010

Food processing machinery - Curing injection machines - Safety and hygiene requirements

  EN 13557:2003+A2:2008

Cranes - Controls and control stations

  EN 13570:2005+A1:2010

Food processing machinery - Mixing machines - Safety and hygiene requirements

  EN 13586:2004+A1:2008

Cranes - Access

  EN 13591:2005+A1:2009

Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements

  EN 13617-1:2021

Petrol filling stations - Part 1: Safety requirements for construction and performance of ...

  EN 13621:2004+A1:2010

Food processing machinery - Salad dryers - Safety and hygiene requirements

  EN 13675:2004+A1:2010

Safety of machinery - Safety requirements for tube forming and rolling mills and their fin...

  EN 13683:2003+A2:2011

Garden equipment - Integrally powered shredders/chippers - Safety

  EN 13683:2003+A2:2011/AC:2013

Garden equipment - Integrally powered shredders/chippers - Safety

  EN 13732:2022

Food processing machinery - Bulk milk coolers on farms - Requirements for performance, saf...

  EN 13862:2021

Floor cutting-off machines - Safety

  EN 13862:2001+A1:2009

Floor cutting-off machines - Safety

  EN 13870:2015+A1:2021

Food processing machinery - Portion cutting machines - Safety and hygiene requirements

  EN 13885:2022

Food processing machinery - Clipping machines - Safety and hygiene requirements

  EN 13885:2005+A1:2010

Food processing machinery - Clipping machines - Safety and hygiene requirements

  EN 13886:2005+A1:2010

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - S...

  EN 13889:2003+A1:2008

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade...

  EN 13954:2005+A1:2010

Food processing machinery - Bread slicers - Safety and hygiene requirements

  EN 13985:2003+A1:2009

Machine tools - Safety - Guillotine shears

  EN 14010:2003+A1:2009

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EM...

  EN 14018:2005+A1:2009

Agricultural and forestry machinery - Seed drills - Safety

  EN 14070:2003+A1:2009

Safety of machine tools - Transfer and special-purpose machines

  EN 14070:2003+A1:2009/AC:2010

Safety of machine tools - Transfer and special-purpose machines

  EN 14238:2004+A1:2009

Cranes - Manually controlled load manipulating devices

  EN 14439:2006+A2:2009

Cranes - Safety - Tower cranes

  EN 14462:2005+A1:2009

Surface treatment equipment - Noise test code for surface treatment equipment including it...

  EN 14466:2005+A1:2008

Fire-fighting pumps - Portable pumps - Safety and performance requirements, tests

  EN 14492-1:2006+A1:2009

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-1:2006+A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 1: Power driven winches

  EN 14492-2:2006+A1:2009

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14492-2:2006+A1:2009/AC:2010

Cranes - Power driven winches and hoists - Part 2: Power driven hoists

  EN 14502-2:2005+A1:2008

Cranes - Equipment for the lifting of persons - Part 2: Elevating control stations

  EN 14655:2005+A1:2010

Food processing machinery - Baguette slicers - Safety and hygiene requirements

  EN 14656:2006+A1:2010

Safety of machinery - Safety requirements for extrusion presses for steel and non-ferrous ...

  EN 14658:2005+A1:2010

Continuous handling equipment and systems - General safety requirements for continuous han...

  EN 14673:2006+A1:2010

Safety of machinery - Safety requirements for hydraulically powered open die hot forging p...

  EN 14681:2006+A1:2010

Safety of machinery - Safety requirements for machinery and equipment for production of st...

  EN 14710-1:2005+A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 1: Classificat...

  EN 14710-2:2005+A2:2008

Fire-fighting pumps - Fire-fighting centrifugal pumps without primer - Part 2: Verificatio...

  EN 14910:2007+A1:2009

Garden equipment - Walk-behind combustion engine powered trimmers - Safety

  EN 14930:2007+A1:2009

Agricultural and forestry machinery and gardening equipment - Pedestrian controlled and ha...

  EN 14957:2006+A1:2010

Food processing machinery - Dishwashing machines with conveyor - Safety and hygiene requir...

  EN 14958:2006+A1:2009

Food processing machinery - Machinery for grinding and processing flour and semolina - Saf...

  EN 15011:2011+A1:2014

Cranes - Bridge and gantry cranes

  EN 15027:2007+A1:2009

Transportable wall saw and wire saw equipment for job site - Safety

  EN 15056:2006+A1:2009

Cranes - Requirements for container handling spreaders

  EN 15059:2009+A1:2015

Snow grooming equipment - Safety requirements

  EN 15061:2007+A1:2008

Safety of machinery - Safety requirements for strip processing line machinery and equipmen...

  EN 15095:2007+A1:2008

Power-operated mobile racking and shelving, carousels and storage lifts - Safety requireme...

  EN 15163-1:2022

Machines and installations for the exploitation and processing of natural stone - Safety -...

  EN 15163-2:2022

Machines and installations for the exploitation and processing of natural stone - Safety -...

  EN 15503:2009+A2:2015

Garden equipment - Garden blowers, vacuums and blower/vacuums - Safety

  EN 15746-2:2010+A1:2011

Railway applications - Track - Road-rail machines and associated equipment - Part 2: Gener...

  EN 16228-1:2014+A1:2021

Drilling and foundation equipment - Safety - Part 1: Common requirements

  EN 16228-2:2014+A1:2021

Drilling and foundation equipment - Safety - Part 2: Mobile drill rigs for civil and geote...

  EN 16228-3:2014+A1:2021

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equip...

  EN 16228-4:2014+A1:2021

Drilling and foundation equipment - Safety - Part 4: Foundation equipment

  EN 16228-5:2014+A1:2021

Drilling and foundation equipment - Safety - Part 5: Diaphragm walling equipment

  EN 16228-6:2014+A1:2021

Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equip...

  EN 16228-7:2014+A1:2021

Drilling and foundation equipment - Safety - Part 7: Interchangeable auxiliary equipment

  EN 16230-1:2013+A1:2014

Leisure karts - Part 1: Safety requirements and test methods for karts

  EN 16307-1:2013+A1:2015

Industrial trucks - Safety requirements and verification - Part 1: Supplementary requireme...

  EN 16517:2021

Agricultural and forestry machinery - Mobile yarders for timber logging - Safety

  EN 16952:2018+A1:2021

Agricultural machinery - Rough-terrain Work Platforms for Orchard

  EN 17003:2021

Road vehicles - Roller brake testers for vehicles of more than 3,5 tons GVW - Safety requi...

  EN 17088:2021

Side curtain ventilation systems - Safety

  EN 17106-1:2021

Road operation machinery - Safety - Part 1: General requirements

  EN 17106-2:2021

Road operation machinery - Safety - Part 2: Specific requirements for road surface cleanin...

  EN 17106-3-1:2021

Road operation machinery - Safety - Part 3-1: Winter service machines - Requirements for s...

  EN 17106-3-2:2021

Road operation machinery - Safety - Part 3-2: Winter service machines - Specific requireme...

  EN 17106-4:2021

Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requi...

  EN 17281:2021

Safety requirements - Vehicle cleaning equipment

  EN 17348:2022

Requirements for design and testing of vacuum cleaners for use in potentially explosive at...

  EN 17352:2022

Power operated pedestrian entrance control equipment - Safety in use - Requirements and te...

  EN ISO 18063-2:2021

Rough-terrain trucks - Visibility test methods and their verification - Part 2: Slewing ro...

  EN ISO 19085-2:2021

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (IS...

  EN ISO 19085-3:2021

Woodworking machines - Safety - Part 3: Numerically controlled (NC/CNC) boring and routing...

  EN ISO 19085-14:2021

Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021)

  EN ISO 19085-15:2021

Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2021)

  EN ISO 19085-16:2021

Woodworking machines - Safety - Part 16: Table band saws and band re-saws (ISO 19085-16:20...

  EN ISO 19085-17:2021

Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17...

  EN ISO 19472-2:2022

Machinery for forestry - Winches - Part 2: Traction aid winches (ISO 19472-2:2022)

  EN ISO 22291:2022

Safety requirements for wetlaid-nonwoven machinery (ISO 22291:2022)

  EN ISO 22867:2021

Forestry and gardening machinery - Vibration test code for portable hand-held machines wit...

  EN ISO 23062:2022

Foundry machinery - Safety requirements for molding and coremaking machinery and associate...

  EN ISO 28881:2022

Machine tools - Safety - Electrical discharge machines (ISO 28881:2022)

  EN ISO 28927-1:2019

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN ISO 28927-13:2022

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part ...

  EN IEC 60335-2-41:2021

Household and similar electrical appliances - Safety - Particular requirements for pumps

  EN IEC 60335-2-41:2021/A11:2021

Household and similar electrical appliances - Safety - Particular requirements for pumps

  EN IEC 60335-2-89:2022

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements ...

  EN IEC 60335-2-89:2022/A11:2022

Household and similar electrical appliances - Safety - Part 2-89: Particular requirements ...

  EN 62841-1:2015/A11:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-1:2018/A12:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-2-1:2018/A1:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-2-3:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-2-3:2021/A11:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-1:2014/A1:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-1:2014/A12:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-3-5:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-3-5:2022/A11:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-6:2014/A1:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-6:2014/A12:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-3-7:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-3-7:2021/A11:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-10:2015/A1:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-3-10:2015/A12:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-4-2:2019/A11:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 62841-4-2:2019/A1:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-4-3:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-4-3:2021/A11:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-4-5:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-4-5:2021/A11:2021

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-4-7:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN IEC 62841-4-7:2022/A11:2022

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery...

  EN 50104:2019

Electrical equipment for the detection and measurement of oxygen - Performance requirement...

  EN 50104:2019/A1:2023

Electrical equipment for the detection and measurement of oxygen - Performance requirement...

  EN 81-21:2022

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-21:2009+A1:2012

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-28:2022

Safety rules for the construction and installation of lifts - Lifts for the transport of p...

  EN 81-58:2022

Safety rules for the construction and installation of lifts - Examination and tests - Part...

  EN 81-70:2021+A1:2022

Safety rules for the construction and installation of lifts - Particular applications for ...

  EN 81-71:2005+A1:2006

Safety rules for the construction and installation of lifts - Particular applications to p...

  EN 81-77:2022

Safety rules for the construction and installations of lifts - Particular applications for...

  EN 12385-3:2004+A1:2008

Steel wire ropes - Safety - Part 3: Information for use and maintenance

  EN 13015:2001+A1:2008

Maintenance for lifts and escalators - Rules for maintenance instructions

  EN 13411-7:2006+A1:2008

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

  EN 301 908-1 V15.2.1

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 1: Introduct...

  EN 302 077 V2.3.1

Transmitting equipment for the Digital Audio Broadcasting (DAB) service; Harmonised Standa...

  EN 302 245 V2.2.1

Transmitting equipment for the Digital Radio Mondiale (DRM) service; Harmonised Standard f...

  EN 303 132 V2.1.1

Maritime VHF survivor locating devices employing Digital Selective Calling (DSC Class M); ...

  EN 303 980 V1.3.1

Satellite Earth Stations and Systems (SES); Fixed and in-motion Earth Stations communicati...

  EN 303 981 V1.3.1

Satellite Earth Stations and Systems (SES); Fixed and in-motion Wide Band Earth Stations c...

  EN 50360:2017/A1:2023

Product standard to demonstrate the compliance of wireless communication devices, with the...

  EN 50566:2017/A1:2023

Product standard to demonstrate the compliance of wireless communication devices with the ...

  EN IEC 60335-2-24:2022

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements ...

  EN IEC 60335-2-24:2022/A11:2022

Household and similar electrical appliances - Safety - Part 2-24: Particular requirements ...

  EN 892:2012+A3:2023

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test met...

  EN 1384:2023

Helmets for equestrian activities

  EN ISO 10819:2013/A2:2022

Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vi...

  EN 13089:2011+A3:2023

Mountaineering equipment - Ice-tools - Safety requirements and test methods

  EN 30-1-1:2021

Domestic cooking appliances burning gas - Part 1-1: Safety - General

  EN 30-1-2:2023

Domestic cooking appliances burning gas - Part 1-2: Safety - Appliances having forced-con...

  EN 88-1:2022

Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure r...

  EN 203-1:2021

Gas heated catering equipment - Part 1: General safety requirements

  EN 203-2-1:2021

Gas heated catering equipment - Part 2-1: Specific requirements - Open burners and wok bur...

  EN 203-2-2:2021

Gas heated catering equipment - Part 2-2: Specific requirements - Ovens

  EN 203-2-4:2021

Gas heated catering equipment - Part 2-4: Specific requirements - Fryers

  EN 257:2022

Mechanical thermostats for gas-burning appliances

  EN 549:2019+A1:2023

Rubber materials for seals and diaphragms for gas appliances and gas equipment

  EN 751-3:2022

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gas...

  EN 1106:2022

Manually operated taps for gas burning appliances

  EN 1854:2022

Safety and control devices for burners and appliances burning gaseous and/or liquid fuels ...

  EN 15502-1:2021

Gas-fired heating boilers - Part 1: General requirements and tests

  EN 15502-2-1:2022

Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and ...

  EN 16898:2022

Safety and control devices for gas burners and gas burning appliances - Gas filters having...

  EN ISO 8848:2022

Small craft - Remote mechanical steering systems (ISO 8848:2022)

  EN ISO 10088:2023

Small craft - Permanently installed fuel systems (ISO 10088:2022)

  EN ISO 10592:2022

Small craft - Remote hydraulic steering systems (ISO 10592:2022)

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0