Need help?

EN ISO 13408-5:2011 Standard

wave
Save  

  Keywords:

#part #agents #requirements #equipment #sip

  Directive

In vitro diagnostic medical devices Directive (98/79/EC)

  Last Official Journal reference

Thursday 15th of April 2021

  Description:

Aseptic processing of health care products - Part 5: Sterilization in place (ISO 13408-5:2006)

  Purpose

1.1 This part of ISO 13408 specifies the general requirements for sterilization in place (SIP) applied to product contact surfaces of the equipment used in the manufacture of sterile health care products by aseptic processing and offers guidance on qualification, validation, operation and control. NOTE SIP can be achieved by using steam or other gaseous or liquid sterilizing agents. Specific guidance on steam sterilization in place, which is the most common method used, is given in Annex A. 1.2 This part of ISO 13408 applies to processes where sterilizing agents are delivered to the internal surfaces of equipment that can come in contact with the product. 1.3 This part of ISO 13408 does not apply to processes where equipment is dismantled and delivered to a sterilizer. 1.4 This part of ISO 13408 does not supersede or replace national regulatory requirements, such as Good Manufacturing Practices (GMPs) and/or compendial requirements that pertain in particular national or regional jurisdictions. 1.5 This part of ISO 13408 does not specify requirements for development, validation and routine control of a process for inactivating the causative agents of spongiform encephalopathies, such as scrapie, bovine spongiform encephalopathy and Creutzfeldt-Jakob disease. Specific recommendations have been produced in particular countries for the processing of materials potentially contaminated with these agents.

  Publication

Friday 17th of November 2017

  Related Standards

EN ISO 11137-2:2015

In vitro diagnostic medical devices Directive (98/79/EC)

Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013)

EN ISO 18113-1:2011

In vitro diagnostic medical devices Directive (98/79/EC)

In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and genera...

EN ISO 11137-1:2015/A2:2019

In vitro diagnostic medical devices Directive (98/79/EC)

Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a ster...

EN ISO 13408-2:2018

In vitro diagnostic medical devices Directive (98/79/EC)

Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO 13408-2:2018)

EN ISO 25424:2019

In vitro diagnostic medical devices Directive (98/79/EC)

Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and rout...

EN ISO 11737-2:2020

In vitro diagnostic medical devices Directive (98/79/EC)

Sterilization of health care products - Microbiological methods - Part 2: Tests of sterility performed in the definition, validati...

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0