Need help?

EN 17106-4:2021 Standard

wave
Save  

  Keywords:

#requirements #document #carrier #attachment #part

  Directive

Machinery Regulation ((EU) 2023/1230)

  Last Official Journal reference

Thursday 12th of March 2026

  Description:

Road operation machinery - Safety - Part 4: Road service area maintenance machines - Requirements for grass and brush cutting machines

  Purpose

This document applies to grass and/or brush cutting machinery which are attached to or mounted on carrier vehicles (e.g. tractor, truck), or which are self-propelled machinery and which are defined in Clause 3.For mobile machinery, which are a combination of a grass/brush-cutting attachment and a carrier-vehicle, this part of the standard addresses the relevant health and safety requirements of Annex I of the machinery directive which are inherent to the grass or brush cutting attachment itself and those resulting from the other risks which are only related to the combination of the grass/brush-cutting attachment with the carrier vehicle (e.g. interfaces between the attachment and the carrier-vehicle, stability, visibility). For machinery which are a combination of a grass/brush-cutting attachment and a carrier-vehicle, this part does not deal with the carrier vehicle itself which is covered by another European legislation.For self-propelled machinery, this part only deals with health and safety requirements of the attachment itself and does not deal with the self-propelled machinery itself which are dealt with in EN 17106-1:2021.The requirements of this part are complementary to the common requirements formulated in EN 17106-1:2021.This document does not repeat the requirements from EN 17106-1:2021, but contains clauses/subclauses which supplement or modify the corresponding clauses/subclauses of part 1 to provide requirements for grass and/or brush cutting machinery.When requirements of this document are different from those which are stated in EN 17106-1:2021, the requirements of this document take precedence over the requirements of EN 17106-1:2021 for machines that have been designed and built according to the provisions of this document.NOTE 1 Road regulations or Directives apply to vehicular trucks and tractors, termed ‘carrier vehicles’ in this standard.NOTE 2 The use in public road traffic is governed by the national regulations.This document deals with all significant hazards identified through a risk assessment pertinent to grass and/or brush cutting machinery, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (transportation, assembly, dismantling and disabling, see Annex D).This document specifies also the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated with machine operation, setting and adjustments, load discharge and routine maintenance.

  Publication

Wednesday 2nd of August 2023

  Related Standards

EN 1028-1:2002+A1:2008

Machinery Regulation ((EU) 2023/1230)

Fire-fighting pumps - Fire-fighting centrifugal pumps with primer - Part 1: Classification - General and safety requirements

EN ISO 11680-1:2021

Machinery Regulation ((EU) 2023/1230)

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integr...

EN 12041:2014

Machinery Regulation ((EU) 2023/1230)

Food processing machinery - Moulders - Safety and hygiene requirements

EN 12016:2013

Machinery Regulation ((EU) 2023/1230)

Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity

EN 12013:2018

Machinery Regulation ((EU) 2023/1230)

Plastics and rubber machines - Internal mixers - Safety requirements

EN 12012-4:2019+A1:2021

Machinery Regulation ((EU) 2023/1230)

Plastics and rubber machines - Size reduction machines - Part 4: Safety requirements for agglomerators

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0