Need help?

EN ISO 19085-17:2021 Standard

wave
Save  

  Keywords:

#workpiece #end #single #machine #integral

  Directive

Machinery Regulation ((EU) 2023/1230)

  Last Official Journal reference

Thursday 12th of March 2026

  Description:

Woodworking machines - Safety - Part 17: Edge banding machines fed by chains (ISO 19085-17:2021)

  Purpose

This document gives the safety requirements and measures for edge banding machines fed by chains or belts, with manual loading and unloading and maximum workpiece height capacity of 100 mm, capable of continuous production use, hereinafter referred as “machines”.It deals with all significant hazards, hazardous situations and events, listed in Annex A, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.The machines are designed to process in one pass one end (single-end machine) or both ends (double-end machine) of panels of:— materials with similar physical characteristics to wood (see ISO 19085-1:2021, 3.2), even with a core sheet of aluminium light alloy;— gypsum plaster boards.Edges to be applied by the machine can be made of:— paper;— melamine;— plastic;— composite materials;— aluminium;— light alloy;— veneer;— solid wood.It is also applicable to machines fitted with one or more of the following devices/working units, whose hazards have been dealt with:— hot air banding unit;— laser banding unit;— infrared banding unit;— dynamic processing units;— sanding belt units;— milling unit installed out of the integral enclosure at the panel side on single-end machines;— milling unit installed out of the integral enclosure between machines halves of double-end machines;— additional fixed or movable workpiece support along the feed;— additional infeed workpiece support;— additional outfeed workpiece support;— in-feed device for transversal loading of panels in single-end machines;— intermediate workpiece support in double-end machines;— automatic panel returner in single-end machines;— automatic tool changing;— quick tool changing system;— automatic multiple edges infeed device;— workpiece heaters.This document does not deal with any hazards relating to:a) systems for loading and unloading of the workpiece to a single machine other than automatic panel returner and infeed and outfeed workpiece supports (e.g. robots);b) the combination of a single machine being used with other machines (as part of a line);c) workpiece dividing unit installed out of the integral enclosure and/or whose tools protrude out of the integral enclosure;d) plasma banding unit.It is not applicable to machines intended for use in potentially explosive atmosphere nor manufactured before the date of its publication.

  Publication

Wednesday 2nd of August 2023

  Related Standards

EN 709:1997+A4:2009

Machinery Regulation ((EU) 2023/1230)

Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with ...

EN ISO 8230-3:2008

Machinery Regulation ((EU) 2023/1230)

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)

EN ISO 10472-2:2008

Machinery Regulation ((EU) 2023/1230)

Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997)

EN ISO 10472-1:2008

Machinery Regulation ((EU) 2023/1230)

Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997)

EN ISO 10218-1:2011

Machinery Regulation ((EU) 2023/1230)

Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011)

EN ISO 9902-7:2001/A2:2014

Machinery Regulation ((EU) 2023/1230)

Textile machinery - Noise test code - Part 7: Dyeing and finishing machinery (ISO 9902-7:2001)

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0