Need help?

EN 12999:2020+A1:2025 Standard

wave
Save  

  Keywords:

#document #loader #designed #vehicles #equipment

  Directive

Machinery Regulation ((EU) 2023/1230)

  Last Official Journal reference

Thursday 12th of March 2026

  Description:

Cranes - Loader cranes

  Purpose

This document specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations. This document applies to loader cranes designed to be installed on: -  road vehicles, including trailers, with load carrying capability; -  tractors (road or agricultural), where only a towed trailer has capability to carry goods; -  demountable bodies to be carried by any of the above; -  other types of carriers (e.g. separate loaders, crawlers, rail vehicles, non-seagoing vessels); -  static foundations. This document also applies to loader cranes equipped with special tools or interchangeable equipment (e.g. grapple, clamshell bucket, pallet clamp, etc.), as specified in the operator’s manual. This document does not apply to loader cranes used on board sea going vessels or to articulated boom system cranes which are designed as total integral parts of special equipment such as forwarders. The hazards covered by this document are identified in Clause 4. This document does not cover hazards related to the lifting of persons. NOTE  The use of cranes for lifting of persons can be subject to specific national regulations. This document is not applicable to loader cranes manufactured before the publication of this document. For loader cranes designed before the publication of this document, the provisions concerning stress calculations in the version of EN 12999 that was valid at the time of their design, are still applicable.

  Publication

Thursday 12th of March 2026

  Amendment

This standard is an amendment for "EN 12999:2020"

  Related Standards

EN ISO 11553-3:2013

Machinery Regulation ((EU) 2023/1230)

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machi...

EN 12629-2:2002+A1:2010

Machinery Regulation ((EU) 2023/1230)

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 2: Block making machine...

EN 12629-7:2004+A1:2010

Machinery Regulation ((EU) 2023/1230)

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 7: Stationary and mobil...

EN 12629-6:2004+A1:2010

Machinery Regulation ((EU) 2023/1230)

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 6: Stationary and mobil...

EN 12629-5-4:2003+A1:2010

Machinery Regulation ((EU) 2023/1230)

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-4: Concrete pipe coat...

EN 12629-5-3:2003+A1:2010

Machinery Regulation ((EU) 2023/1230)

Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-3: Pipe prestressing ...

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0