Need help?

EN ISO 13851:2019 Standard

wave
Save  

  Keywords:

#thcds #document #used #specify #thcd

  Directive

Machinery Regulation ((EU) 2023/1230)

  Last Official Journal reference

Thursday 12th of March 2026

  Description:

Safety of machinery - Two-hand control devices - Principles for design and selection (ISO 13851:2019)

  Purpose

This document specifies the safety requirements of a two-hand control device (THCD) and the dependency of the output signal from the actuation by hand of the control actuating devices. This document describes the main characteristics of THCDs for the achievement of safety and sets out combinations of functional characteristics for three types. It does not apply to devices intended to be used as enabling devices, as hold-to-run devices or as special control devices. This document does not specify with which machines THCDs shall be used. It also does not specify which types of two-hand-control device shall be used for a specific application. Moreover, while guidance is given, it does not specify the required distance between the THCD and the danger zone (see 8.8). This document provides requirements for design and guidance on the selection (based on a risk assessment) of THCDs including the prevention of defeat, the avoidance of faults and verification of compliance. NOTE 1 A THCD only offers protection for the person using it. NOTE 2 For specific machines, the suitability of a two-hand control as a suitable protective device can be defined in a type-C standard. If such a standard does not exist or is not appropriate, the risk assessment and determination of suitable protective measures is the responsibility of the manufacturer of the machine. This document applies to all THCDs, independent of the energy used, including: — THCDs which are fully assembled for installation; — THCDs which are assembled by the machine manufacturer or integrator. This document is not applicable to THCDs manufactured before the date of its publication.

  Publication

Wednesday 3rd of March 2021

  Related Standards

EN 1010-1:2004+A1:2010

Machinery Regulation ((EU) 2023/1230)

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Comm...

EN ISO 11148-4:2012

Machinery Regulation ((EU) 2023/1230)

Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012)

EN ISO 5674:2009

Machinery Regulation ((EU) 2023/1230)

Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and a...

EN ISO 7096:2020

Machinery Regulation ((EU) 2023/1230)

Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)

EN ISO 8230-2:2008

Machinery Regulation ((EU) 2023/1230)

Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008)

EN ISO 8230-3:2008

Machinery Regulation ((EU) 2023/1230)

Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008)

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0