Need help?

EN 848-2:2007+A2:2012 Standard

wave
Save  

  Keywords:

#bench #nc #machines #routers #document

  Directive

Machinery Regulation ((EU) 2023/1230)

  Last Official Journal reference

Thursday 12th of March 2026

  Description:

Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines

  Purpose

This document specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single spindle hand fed/integrated fed routing machines with fixed head but allowing only movement along the axis of the tool during machining hereinafter referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials if they are covered with plastic laminate, edgings or veneer when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. For the definition of stationary and displaceable machine see 3.2.17 and 3.2.18. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. This document does not apply to: a) inverted pin routers and radial arm routers (machines where the work piece is fixed and the tool head is manually moved); b) NC boring machines and NC routing machines; NC boring machines and NC routing machines are dealt with in EN 848-3:2007+A1:2009. c) hand-held routers or any adaptation permitting their use in a different mode, e.g. bench mounting; NOTE 1 Hand-held motor-operated electric tools are dealt with in EN 60745-1:2009 together with EN 60745-2-17:2003. d) routing machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down. NOTE 2 Transportable motor-operated electric tools are dealt with in EN 61029-1:2000 together with EN 61029-2-8:2010. This document is not applicable to single spindle hand fed/integrated fed routing machines which are manufactured before the date of its publication as EN.

  Publication

Thursday 15th of November 2012

  Amendment

This standard is an amendment for "EN 848-2:2007"

  Related Standards

EN 378-2:2016

Machinery Regulation ((EU) 2023/1230)

Refrigerating systems and heat pumps - Safety and environmental requirements - Part 2: Design, construction, testing, marking and ...

EN ISO 11148-6:2012

Machinery Regulation ((EU) 2023/1230)

Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)

EN ISO 11553-3:2013

Machinery Regulation ((EU) 2023/1230)

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machi...

EN ISO 11553-2:2008

Machinery Regulation ((EU) 2023/1230)

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:...

EN ISO 11252:2013

Machinery Regulation ((EU) 2023/1230)

Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013)

EN ISO 11148-13:2018

Machinery Regulation ((EU) 2023/1230)

Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017)

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0