Need help?

EN 1804-2:2020 Standard

wave
Save  

  Keywords:

#document #support #hazards #safety #can

  Directive

Machinery Regulation ((EU) 2023/1230)

  Last Official Journal reference

Thursday 12th of March 2026

  Description:

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams

  Purpose

This document stipulates the safety requirements for use of legs and rams as intended by the manufacturer. These include legs, support rams and rams, including the mechanical extensions, the inner valves and safety devices, seals, the hydraulic connections (up to the 1st hose line or to the valve of design B, see EN 1804-3:2020) and their lifting points, but excluding protective pipes and gaiters, external valves and hydraulic and electrohydraulic control systems. NOTE  Some components are discussed in other parts of this standard series. This document applies for legs, support rams, and cylinders that are used at ambient temperatures between -10 °C and 60 °C. This document identifies and takes account of: -  possible hazards which may be caused by the operation of legs, support rams and rams; -  the hazardous areas and the operating conditions that can cause any type of hazard; -  the situations that can result in hazards that cause an injury or impair health; -  dangers that can be caused through mine gas and/or flammable dusts. This document describes methods for reducing these hazards. Clause 4 contains a list of the hazards discussed. This document does not specify any additional requirements for: -  specially corrosive environments; -  risks associated with manufacturing and decommissioning; -  earthquake. A complete hydraulic powered roof support consists of the support units (EN 1804-1:2020), legs and support rams (EN 1804-2:2020) and the hydraulic and electro hydraulic controls (EN 1804-3:2020). Each part of this multipart document addresses the safety requirements of the components mentioned in the scopes of the respective parts of this multipart series. This document is not applicable to legs and rams manufactured before the date of its publication.

  Publication

Friday 15th of October 2021

  Related Standards

EN 12733:2018

Machinery Regulation ((EU) 2023/1230)

Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety

EN 12041:2014

Machinery Regulation ((EU) 2023/1230)

Food processing machinery - Moulders - Safety and hygiene requirements

EN 12203:2003+A1:2009

Machinery Regulation ((EU) 2023/1230)

Footwear, leather and imitation leather goods manufacturing machines - Shoe and leather presses - Safety requirements

EN 12162:2001+A1:2009

Machinery Regulation ((EU) 2023/1230)

Liquid pumps - Safety requirements - Procedure for hydrostatic testing

EN 12159:2012

Machinery Regulation ((EU) 2023/1230)

Builders hoists for persons and materials with vertically guided cages

EN 12158-2:2000+A1:2010

Machinery Regulation ((EU) 2023/1230)

Builders' hoists for goods - Part 2: Inclined hoists with non-accessible load carrying devices

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0