Need help?

EN 1870-17:2012 Standard

wave
Save  

  Keywords:

#manual #circular #document #bench #machine

This standard can be totally or partially supervised by:
  •   EN 1870-17:2012+A1:2015
  •   This standard is no longer addressed in the last official Journal publication of the "2026-03-12 ". This standard is addressed for the last time in the official journal publication of the "2016-05-13"

      Directive

    Machinery Regulation ((EU) 2023/1230)

      Last Official Journal reference

    Friday 13th of May 2016

      Description:

    Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws)

      Purpose

    This European Standard specifies all significant hazards, hazardous situation and events as listed in Clause 4, relevant to stationary and displaceable manual horizontal cutting cross-cut circular sawing machines with one saw unit (manual radial arm saws), hereinafter referred to as "machines", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials if they are covered with plastic edging and/or plastic laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.NOTE 1  For the definition of stationary and displaceable machine, see 3.2.3 and 3.2.4.The requirements of this document apply to all machines whatever their method of control e.g. electromechanical and/or electronic.This document does not apply to:a)  machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand; the bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down;NOTE 2  Transportable motor-operated electrical tools are dealt with in EN 61029-1:2009 together with IEC 61029-2-2:1993.b)  machines fitted with hydraulically powered machine actuators;c)  machines fitted with powered work-piece positioning;d)  machines fitted with the facility for either ripping, milling (including trenching and grooving), sanding and/or drilling;e)  machines equipped with more than one saw spindle speed;NOTE 3  A standard to cover machines that can be used for ripping and moulding will be considered at the next revision.NOTE 4  Semi-automatic and automatic horizontal cutting cross-cut circular sawing machines with one saw unit (radial arm saws) are dealt with in EN 1870-11:2003+A1:2009.f)  machines with integrated feed.This document is not applicable to manual horizontal cutting cross-cut circular sawing machines with one saw unit (manual radial arm saws) which are manufactured before the date of its publication as EN.

      Publication

    Friday 13th of February 2015

      Cessation

    This standard has been withdrawn on 2016-05-13

      Related Standards

    EN 12387:2005+A1:2009

    Machinery Regulation ((EU) 2023/1230)

    Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements

    EN ISO 7096:2020

    Machinery Regulation ((EU) 2023/1230)

    Earth-moving machinery - Laboratory evaluation of operator seat vibration (ISO 7096:2020)

    EN ISO 9902-4:2001/A2:2014

    Machinery Regulation ((EU) 2023/1230)

    Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)

    EN ISO 9902-3:2001/A2:2014

    Machinery Regulation ((EU) 2023/1230)

    Textile machinery - Noise test code - Part 3: Nonwoven machinery (ISO 9902-3:2001)

    EN ISO 9902-2:2001/A2:2014

    Machinery Regulation ((EU) 2023/1230)

    Textile machinery - Noise test code - Part 2: Spinning preparatory and spinning machinery (ISO 9902-2:2001)

    EN ISO 9902-1:2001/A2:2014

    Machinery Regulation ((EU) 2023/1230)

    Textile machinery - Noise test code - Part 1: Common requirements (ISO 9902-1:2001)

      Stay up to date

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0