Need help?

EN 13001-3-5:2016+A1:2021 Standard

wave
Save  

  Keywords:

#standard #european #hook #designs #requirements

  Directive

Machinery Regulation ((EU) 2023/1230)

  Last Official Journal reference

Thursday 12th of March 2026

  Description:

Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks

  Purpose

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and, as such, they specify general conditions, requirements and methods to prevent by design and theoretical verification, mechanical hazards in crane hooks.This European Standard covers the following parts of hooks and types of hooks:-  bodies of any type of hooks made of steel forgings;-  machined shanks of hooks with a thread/nut suspension.Principles of this European Standard can be applied to machined shanks of hooks in general. However, stress concentration factors relevant to designs not given in this standard would have to be determined and applied.NOTE 1  Cast hooks and plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this European Standard.The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are necessary to reduce or eliminate the risks associated with the following hazards:a)  exceeding the limits of strength (yield, ultimate, fatigue);b)  exceeding temperature limits of material.The requirements of this European Standard are stated in the main body of the document and are applicable to forged hook designs in general.The commonly used hook body and shank designs listed in Annexes A, B and F are only examples and should not be referred to as requirements of this European Standard. Annex I gives guidance for the selection of a hook size, where a hook body is in accordance with Annex A or B. The selection of hook form is not limited to those shown in Annexes A and B.This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types.NOTE 2  This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1.

  Publication

Wednesday 2nd of August 2023

  Amendment

This standard is an amendment for "EN 13001-3-5:2016"

  Related Standards

EN 1093-6:1998+A1:2008

Machinery Regulation ((EU) 2023/1230)

Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Separation efficiency by mass, unducte...

EN ISO 11148-8:2011

Machinery Regulation ((EU) 2023/1230)

Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011)

EN ISO 11681-1:2022

Machinery Regulation ((EU) 2023/1230)

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2...

EN ISO 11680-2:2021

Machinery Regulation ((EU) 2023/1230)

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 2: Machines for use with backpack...

EN ISO 11680-1:2021

Machinery Regulation ((EU) 2023/1230)

Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integr...

EN ISO 11553-3:2013

Machinery Regulation ((EU) 2023/1230)

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machi...

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0