Need help?

EN ISO 19918:2017 Standard

wave
Save  

  Keywords:

#method #test #used #chemical #ppe

  This standard is no longer addressed in the last official Journal publication of the "2025-05-14 ". This standard is addressed for the last time in the official journal publication of the "2022-12-06"

  Directive

Personal protective equipment Regulation ((EU) 2016/425)

  Last Official Journal reference

Tuesday 6th of December 2022

  Description:

Protective clothing Protection against chemicals Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO 19918:2017)

  Purpose

ISO 19918 describes laboratory test methods to determine the resistance of materials, closures, and seams used in personal protective equipment (PPE) to permeation by solid or liquid chemicals with low vapour pressure (less than 133,322 Pa at 25 °C) and/or insolubility in water or other liquids commonly used as collection media. These chemicals that are often part of pesticide formulations and other mixtures cannot be measured using other standards for measuring permeation. This test method is suitable for field strength and concentrated pesticide formulations as well as other mixtures in which the active ingredient is a chemical with low vapour pressure and/or low solubility in commonly used liquid and gaseous collection media. This test method is not intended to be used in place of standards such as ISO 6529, EN 16523-1 and ASTM F739, which measure permeation of chemicals that are either volatile or soluble in water or other liquids that do not interact with the material being tested. ISO 19918 is not suitable for measurement of volatile chemicals that may evaporate before the chemical analysis is complete. The degree of contamination depends on numerous factors, such as type of exposure, application technique, and chemical formulation. As the level of exposure can vary considerably, this method is designed to rate relative performance of PPE materials for different durations. This method is designed to measure cumulative permeation. Breakthrough time cannot be measured by this method. This test method does not measure resistance to penetration or degradation. The test method standard may be used for the evaluation of PPE materials that are new or those for which the product standard requires treatment, such as laundering or simulated abrasion. Details of the treatment shall be reported.

  Publication

Tuesday 26th of June 2018

  Related Standards

EN 892:2012+A3:2023

Personal protective equipment Regulation ((EU) 2016/425)

Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods

EN ISO 18527-2:2021

Personal protective equipment Regulation ((EU) 2016/425)

Eye and face protection for sports use - Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and...

EN 469:2020

Personal protective equipment Regulation ((EU) 2016/425)

Protective clothing for firefighters - Performance requirements for protective clothing for firefighting activities

EN 352-1:2020

Personal protective equipment Regulation ((EU) 2016/425)

Hearing protectors - General requirements - Part 1: Earmuffs

EN 352-2:2020

Personal protective equipment Regulation ((EU) 2016/425)

Hearing protectors - General requirements - Part 2: Earplugs

EN 352-3:2020

Personal protective equipment Regulation ((EU) 2016/425)

Hearing protectors - General requirements - Part 3: Earmuffs attached to head protection and/or face protection devices

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0