Need help?

EN 10028-5:2017 Standard

wave
Save  

  Keywords:

#european #standard #eu #data #requirements

  Directive

Pressure equipment Directive (2014/68/EU)

  Last Official Journal reference

Monday 12th of January 2026

  Description:

Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled

  Purpose

This European Standard specifies the requirements for flat products for pressure equipment made of thermomechanically rolled steels as specified in Table 1. The steels are not suitable for hot forming. NOTE 1  At the time of publication of this European Standard, no sufficient data for the standardization of the elevated temperature properties of these steels was available. If their use at such temperatures is intended the conditions for this should be specially agreed between the interested parties. The requirements of EN 10028 1:2017 also apply. NOTE 2  Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.

  Publication

Friday 9th of February 2018

  Reference

This standard supersedes the "EN 10028-5:2009"

Anyway is still possible use the "EN 10028-5:2009" until September 14th, 2018

  Related Standards

EN 13134:2000

Pressure equipment Directive (2014/68/EU)

Brazing - Procedure approval

EN 12953-4:2018

Pressure equipment Directive (2014/68/EU)

Shell boilers - Part 4: Workmanship and construction of pressure parts of the boiler

EN ISO 21009-2:2015

Pressure equipment Directive (2014/68/EU)

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO 21009-2:2015)

EN ISO 21028-1:2016

Pressure equipment Directive (2014/68/EU)

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-...

EN 267:2009+A1:2011

Pressure equipment Directive (2014/68/EU)

Automatic forced draught burners for liquid fuels

EN 334:2005+A1:2009

Pressure equipment Directive (2014/68/EU)

Gas pressure regulators for inlet pressures up to 100 bar

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0