Need help?

EN 16767:2016 Standard

wave
Save  

  Keywords:

#dn #end #pn #class #welding

This standard is superseded by:
  •   EN 16767:2020
  •   This standard is no longer addressed in the last official Journal publication of the "2026-01-12 ". This standard is addressed for the last time in the official journal publication of the "2021-12-20"

      Directive

    Pressure equipment Directive (2014/68/EU)

      Last Official Journal reference

    Monday 20th of December 2021

      Description:

    Industrial valves - Steel and cast iron check valves

      Purpose

    This European Standard specifies the requirements for cast iron or steel check valves, which are forged, cast or fabricated in straight, angle or oblique pattern (see EN 736-2) with end connections flanged or wafer, butt welding, socket welding, or threaded. This European standard applies to check valves mainly used for industrial and general purpose applications. However, they may be used for other applications provided the requirements of the relevant performance standards are met. Back flow prevention anti-pollution check valves are outside the scope of this European standard. The range of nominal sizes covered is: DN 8, DN 10; DN 12, DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1000. DN 8 and DN 12 are not used for PN designated flanged end connections. DN 8, DN 10 and DN 12 are not used for Class designated flanged end connections. DN 750 is used for Class designated valves only. Socket welding end valves and threaded end valves are limited to the range DN 8 to DN 65. The range of pressure designations covered is: a) for flanged end and wafer type end cast iron bodies: - PN 2,5; PN 6; PN 10; PN 16; PN 25; - Class 125; Class 250; b) for flanged end, wafer type and butt welding end steel bodies: - PN 40; PN 63; PN 100; - Class 150; Class 300; Class 600; c) for socket welding end steel bodies and threaded end steel bodies: - PN 40; PN 63; PN 100; - Class 600; Class 800. NOTE Class 800 is a widely used Class designation for socket welding and threaded end valves.

      Publication

    Friday 12th of August 2016

      Cessation

    This standard has been withdrawn on 2022-08-10

      Related Standards

    EN 10217-4:2019

    Pressure equipment Directive (2014/68/EU)

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with spec...

    EN 10217-6:2019

    Pressure equipment Directive (2014/68/EU)

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with...

    EN 13348:2016

    Pressure equipment Directive (2014/68/EU)

    Copper and copper alloys - Seamless, round copper tubes for medical gases or vacuum

    EN ISO 4126-1:2013/A2:2019

    Pressure equipment Directive (2014/68/EU)

    Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO 4126-1:2013)

    EN 10217-1:2019

    Pressure equipment Directive (2014/68/EU)

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-al...

    EN 10217-2:2019

    Pressure equipment Directive (2014/68/EU)

    Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes...

      Stay up to date

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0