Need help?

EN ISO 21028-2:2018 Standard

wave
Save  

  Keywords:

#steels #steel #annex #low #aluminium

  Directive

Pressure equipment Directive (2014/68/EU)

  Last Official Journal reference

Friday 2nd of October 2026

  Description:

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C (ISO 21028-2:2018)

  Purpose

ISO 21028-2:2018 specifies the toughness requirements of metallic materials for use at temperatures between −20 °C and −80 °C to ensure their suitability for cryogenic vessels. This document is applicable to fine-grain and low-alloyed steels with specified yield strength ≤460 N/mm2, aluminium and aluminium alloys, copper and copper alloys and austenitic stainless steels. NOTE For steel materials listed in EN 13445-2 or EN 13480-2 or for steel materials and weldings complying with the same fundamental safety requirements, the requirements for prevention of brittle fracture at low temperatures according to EN 13445-2:2014, Annex B, method 2, or EN 13480-2:2012, Annex B, method 2 can be applied.

  Publication

Monday 30th of September 2019

  Related Standards

EN ISO 24664:2024

Pressure equipment Directive (2014/68/EU)

Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation (ISO 24664:20...

EN 12952-14:2004

Pressure equipment Directive (2014/68/EU)

Water-tube boilers and auxiliary installations - Part 14: Requirements for flue gas DENOX-systems using liquefied pressurized ammo...

EN 10272:2016

Pressure equipment Directive (2014/68/EU)

Stainless steel bars for pressure purposes

EN 10273:2016

Pressure equipment Directive (2014/68/EU)

Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties

EN 10305-4:2016

Pressure equipment Directive (2014/68/EU)

Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneum...

EN 10305-6:2016

Pressure equipment Directive (2014/68/EU)

Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumat...

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0