Need help?

EN 301 489-54 V1.1.1 Standard

wave
Save  

  Keywords:

#radar #document #present #mhz #requirements

  Directive

Radio equipment Directive (2014/53/EU)

  Last Official Journal reference

Tuesday 9th of December 2025

  Description:

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 54: Specific conditions for fixed ground based aeronautical and meteorological radars; Harmonised Standard for electromagnetic compatibility

  Purpose

The present document specifies technical characteristics and methods of measurement in respect of ElectroMagnetic Compatibility (EMC) for the following radar systems:• Fixed and ground based monostatic aeronautical Primary Surveillance Radar (PSR) and Surface Movement Radar (SMR) • Fixed and ground based monostatic meteorological radar system, for example weather radar systems or wind profilerwith the following characteristics:• operating in at least one of the frequency ranges as shown in table 1;• operated only by AC power.The above mentioned radio equipment is intended to be used at a fixed location (permanent or temporarily) and is equipped with rotating passive antennas.A radar system consists of one or more enclosures that contain at least the following radar functionalities: transmitter, receiver, signal processing. Other parts which are not part of the radar functionality e.g. local UPS, air conditioning equipment, dehumidifying equipment, communication network equipment, etc., are not in the scope of the present document, unless these parts are implemented inside the radar system enclosure(s).Table 1: Frequency range of fixed ground based aeronautical and meteorological radar systemsOperating frequency ranges1 215 MHz to 1 400 MHz2 700 MHz to 3 100 MHz5 250 MHz to 5 850 MHz8 500 MHz to 10 500 MHzTechnical specifications related to the antenna port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards under article 3.2 of Directive 2014/53/EU.Emission requirements in the present document are specified for frequencies above 9 kHz.The environmental classification and the emission and immunity requirements used in the present document are as stated in ETSI EN 301 489-1 [1], except for any special conditions included in the present document.NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU is given in annex A.

  Publication

Wednesday 14th of May 2025

  Related Standards

EN 50385:2017

Radio equipment Directive (2014/53/EU)

Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits...

EN 302 217-2 V3.3.1

Radio equipment Directive (2014/53/EU)

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating...

EN 300 718-1 V2.2.1

Radio equipment Directive (2014/53/EU)

Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 1: Harmonised Standard for access to radio spectrum

EN 303 758 V1.1.1

Radio equipment Directive (2014/53/EU)

TETRA radio equipment using non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kH...

EN 303 413 V1.2.1

Radio equipment Directive (2014/53/EU)

Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the ...

EN 303 372-2 V1.2.1

Radio equipment Directive (2014/53/EU)

Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part 2: Indoor unit

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 301 489-54 V1.1.1 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0