Need help?

EN 302 574-3 V2.1.1 Standard

wave
Save  

  Keywords:

#equipment #document #present #may #11

  Directive

Radio equipment Directive (2014/53/EU)

  Last Official Journal reference

Friday 1st of December 2023

  Description:

Satellite Earth Stations and Systems (SES); Harmonised Standard for Mobile Earth Stations (MES) operating in the 1 980 MHz to 2 010 MHz (earth-to-space) and 2 170 MHz to 2 200 MHz (space-to-earth) frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 3: User Equipment (UE) for narrowband systems

  Purpose

The present document applies to User Equipment (UE) radio equipment type which have the following characteristics: • these UEs have both transmit and receive capabilities and operate in a Geostationary satellite network; • these UEs operate with an assigned channel signal bandwidth (CBw) smaller than 1 MHz; • these UEs may be handset, handheld, portable, vehicle-mounted, host connected, semi-fixed or fixed equipment, or may be an element in a multi-mode terminal. It may consist of a number of modules with associated connections and user interface, or may be a self-contained single unit; • if the UE is an element in a multi-mode terminal, unless otherwise stated in the present document, its requirements apply only to the UE element of the terminal operating in the Mobile Satellite Service (MSS) frequency bands given in table 1. This radio equipment type is capable of operating in all or any part of the frequency bands given in table 1. Table 1: Mobile Satellite Service UE frequency bands Operating band I Direction of transmission UE frequency bands UE Transmit (earth-to-space) 1 980 MHz to 2 010 MHz UE Receive (space-to-earth) 2 170 MHz to 2 200 MHz The present document is intended to cover the provisions of Directive 2014/53/EU [7] (RE Directive) article 3.2 which states that "….radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the RE Directive [7] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org.

  Publication

Wednesday 12th of April 2017

  Essential Requirement

Article 3(2)

  Related Standards

EN 50360:2017

Radio equipment Directive (2014/53/EU)

Product standard to demonstrate the compliance of wireless communication devices, with the basic restrictions and exposure limit v...

EN 303 413 V1.2.1

Radio equipment Directive (2014/53/EU)

Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the ...

EN 302 217-2 V3.3.1

Radio equipment Directive (2014/53/EU)

Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 2: Digital systems operating...

EN 302 480 V2.2.1

Radio equipment Directive (2014/53/EU)

Mobile Communication On Board Aircraft (MCOBA) systems; Harmonised Standard for access to radio spectrum

EN 302 567 V2.2.1

Radio equipment Directive (2014/53/EU)

Multiple-Gigabit/s radio equipment operating in the 60 GHz band

EN 303 345-3 V1.1.1

Radio equipment Directive (2014/53/EU)

Broadcast Sound Receivers; Part 3: FM broadcast sound service

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 302 574-3 V2.1.1 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0