Need help?

EN 301 443 V2.1.1 Standard

wave
Save  

  Keywords:

#document #present #radio #designed #space

  Directive

Radio equipment Directive (2014/53/EU)

  Last Official Journal reference

Tuesday 9th of December 2025

  Description:

Satellite Earth Stations and Systems (SES); Harmonised Standard for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering the essential requirements of article 3.2 of the Directive 2014/53/EU

  Purpose

The present document applies to any Very Small Aperture Terminal (VSAT) which has the following characteristics: • the VSAT is operating in one or more frequency ranges within the following bands allocated to the Fixed Satellite Service (FSS), shared with other services, e.g. the Fixed Service (FS) and the Mobile Service (MS): - 5,850 GHz to 7,075 GHz (earth-to-space); - 3,400 GHz to 4,200 GHz (space-to-earth); • the VSAT uses linear or circular polarization; • the VSAT operates through a geostationary satellite at least 3° away from any other geostationary satellite operating in the same frequency band and covering the same area; • the VSAT antenna diameter does not exceed 7,3 m, or equivalent effective area; • the VSAT is either: - a transmit-only VSAT: designed for transmission-only of radio-communications signals in the frequency band (earth-to-space) specified above; or - a transmit-and-receive VSAT: designed for transmission-and-reception of radio-communications signals in the frequency bands specified above; or - a receive-only VSAT: designed for reception-only of radio-communications signals in the frequency band (space-to-earth) specified above; • the VSAT is designed usually for unattended operation; • the VSAT is operating as part of a satellite network (e.g. star, mesh or point-to-point) used for the distribution and/or exchange of information between users; • the transmit-only and transmit-and-receive VSAT is controlled and monitored by a Centralized Control and Monitoring Function (CCMF). The CCMF is outside the scope of the present document. The present document applies to the VSAT with its ancillary equipment and its various terrestrial ports, and when operated within the boundary limits of the operational environmental profile declared by the applicant and when installed as required by the applicant by declaration or in the user documentation. The present document is intended to cover the provisions of Directive 2014/53/EU (RE Directive) [6] article 3.2, which states that "... radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference". In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the RE Directive [6] may apply to equipment within the scope of the present document. NOTE: A list of such ENs is included on the web site http://www.newapproach.org/.

  Publication

Wednesday 12th of April 2017

  Essential Requirement

Article 3(2)

  Related Standards

EN 50385:2017

Radio equipment Directive (2014/53/EU)

Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits...

EN 301 908-14 V17.1.1

Radio equipment Directive (2014/53/EU)

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 14: Evolved Universal Terrestrial Radio Access (E-UT...

EN 303 347-2 V2.1.1

Radio equipment Directive (2014/53/EU)

Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 2: Meteorological Radar Sensor operating in the freq...

EN 303 347-1 V2.1.1

Radio equipment Directive (2014/53/EU)

Meteorological Radars; Harmonised Standard for access to radio spectrum; Part 1: Meteorological Radar Sensor operating in the freq...

EN 303 132 V2.1.1

Radio equipment Directive (2014/53/EU)

Maritime VHF survivor locating devices employing Digital Selective Calling (DSC Class M); Harmonised Standard for access to radio ...

EN 303 345-2 V1.2.1

Radio equipment Directive (2014/53/EU)

Broadcast Sound Receivers; Part 2: AM broadcast sound service; Harmonised Standard for access to radio spectrum

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 301 443 V2.1.1 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0