Need help?

EN 301 489-12 V3.2.1 Standard

wave
Save  

  Keywords:

#etsi #present #document #operating #receive

  Directive

Radio equipment Directive (2014/53/EU)

  Last Official Journal reference

Friday 1st of December 2023

  Description:

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations operated in the frequency ranges between 4 GHz and 30 GHz in the Fixed Satellite Service (FSS); Harmonised Standard for ElectroMagnetic Compatibility

  Purpose

The present document specifies technical characteristics and methods of measurement for the Earth Stations (ESs) operating in the frequency ranges between 3,625 GHz and 30 GHz in the Fixed Satellite Service (FSS) bands, and associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC).Technical specifications related to the antenna port and emissions from the enclosure port of the Earth Stations (ESs) are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum, see table 1.Table 1: Radio Technologies in scope of the present document:Technology; ETSI StandardVSAT for Transmit-only, transmit/receive or receive-only satellite Earth Stations operating in the 10,70 GHz to 14,50 GHz frequency bands; ETSI EN 301 428ES for Satellite News Gathering Transportable Earth Stations (SNG TESs) operating in the 10,70 GHz to 14,50 GHz frequency bands; ETSI EN 301 430VSAT for Transmit-only, transmit-and-receive, receive-only satellite Earth Stations operating in the 3,625 GHz to 6,425 GHz frequency bands; ETSI EN 301 443ES for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit in the 19,70 GHz to 30,0 GHz frequency bands; ETSI EN 301 459ES for Satellite User Terminals (SUT) transmitting towards satellites in geostationary orbit in the 17,70 GHz to 29,5 GHz frequency bands; ETSI EN 301 360ES for Earth Stations On Mobile Platforms (ESOMP) transmitting towards satellites in geostationary orbit, operating in the 17,70 GHz to 30,0 GHz frequency bands; ETSI EN 303 978Definitions of the type of Earth Stations (ESs) operating in the frequency ranges between 3,625 GHz and 30 GHz in the Fixed Satellite Service (FSS) covered by the present document are given in annex B. The environmental classification used in the present document are as stated in ETSI EN 301 489-1.NOTE: The relationship between the present document and essential requirements of article 3.1(b) of Directive 2014/53/EU is given in annex A.

  Publication

Friday 11th of November 2022

  Related Standards

EN 300 065 V2.1.2

Radio equipment Directive (2014/53/EU)

Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Stan...

EN 303 363-1 V1.1.1

Radio equipment Directive (2014/53/EU)

Air Traffic Control Surveillance Radar Sensors; Secondary Surveillance Radar (SSR); Harmonised Standard for access to radio spectr...

EN 301 444 V2.2.1

Radio equipment Directive (2014/53/EU)

Satellite Earth Stations and Systems (SES); Land Mobile Earth Stations (LMES) and Maritime Mobile Earth Stations (MMES) providing ...

EN 301 908-10 V4.3.1

Radio equipment Directive (2014/53/EU)

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 10: Base Stations (BS), Repeaters and User Equipment...

EN 301 908-13 V13.2.1

Radio equipment Directive (2014/53/EU)

IMT cellular networks; Harmonised Standard for access to radio spectrum; Part 13: Evolved Universal Terrestrial Radio Access (E-UT...

EN 300 422-1 V2.2.1

Radio equipment Directive (2014/53/EU)

Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Audio PMSE Equipment up to 3 GHz; Harmonised Standard for access to radio sp...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 301 489-12 V3.2.1 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0