Need help?

EN 50176:2025 Standard

wave
Save  

  Keywords:

#systems #document #electrical #zone #specifies

  Directive

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

  Last Official Journal reference

Monday 4th of May 2026

  Description:

Automatic electrostatic application system for ignitable liquid coating materials - Safety requirements

  Purpose

1.1  This document specifies the electrical requirements for the design of automatic electrostatic application systems for liquid coating materials which can be ignited in an atomised state, used within a temperature range from 5 °C to 40 °C. This document considers automatic electrostatic application systems for processing ignitable liquid coating materials, where the conductivity of the complete system is limited up to 50 nS/cm. Together with additional measures like e.g. potential separation systems, these requirements can also be applied to ignitable liquid coating materials, where the conductivity of the complete system is limited up to 2 000 μS/cm. Ignition hazards related to the generated explosive atmosphere and the protection of persons against electric shock are considered. 1.2  This document specifies -  requirements for an interface to machinery according to EN 16985:2018, -  additional requirements for machinery covered by EN 1953:2025 and EN 12621:2025. 1.3  This document also specifies requirements for a safe operation of electrostatic application systems, including the electrical installation. The requirements consider both the processing of coating materials and the cleaning and purge processes. 1.4  This document applies to three types of spraying systems; see 5.1.1. Spraying systems are classified as equipment of group II, category 2G (for intended use in zone 1 or zone 2) or category 3G (for intended use in zone 2). Only electrostatic spraying systems operating with a d.c. sinusoidal ripple of not more than 10 % of the r.m.s. value are considered. 1.5  For electrostatic application systems used in food and pharmaceutical industry, additional requirements may apply. 1.6  This document does not apply to -  potential separation systems; -  selection, installation and application of other electrical and non-electrical equipment in areas with explosion hazard, see EN 60079-14:2014 and EN 16985:2018; -  quality assurance systems for electrostatic spraying equipment (see EN ISO/IEC 80079-34:2020, ZB.11).

  Publication

Thursday 11th of September 2025

  Related Standards

EN 1127-1:2019

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology

EN 14591-2:2007/AC:2008

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers

EN 1953:2013

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Atomising and spraying equipment for coating materials - Safety requirements

EN 13237:2012

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially exp...

EN 13852-1:2013

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

EN 14491:2012

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Dust explosion venting protective systems

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0