Need help?

EN 1127-1:2019 Standard

wave
Save  

  Keywords:

#equipment #protective #systems #components #document

  Directive

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

  Last Official Journal reference

Wednesday 26th of February 2020

  Description:

Explosion prevention and protection Part 1: Basic concepts and methodology

  Purpose

This document specifies methods for the identification and assessment of hazardous situations leading to explosion and the design and construction measures appropriate for the required safety. This is achieved by: — risk assessment; — risk reduction. The safety of equipment, protective systems and components can be achieved by eliminating hazards and/or limiting the risk, i.e. by: a) appropriate design (without using safeguarding); b) safeguarding; c) information for use; d) any other preventive measures. Measures in accordance with a) (prevention) and b) (protection) against explosions are dealt with in Clause 6, measures according to c) against explosions are dealt with in Clause 7. Measures in accordance with d) are not specified in this document. They are dealt with in EN ISO 12100:2010, Clause 6. The preventive and protective measures described in this document will not provide the required level of safety unless the equipment, protective systems and components are operated within their intended use and are installed and maintained according to the relevant codes of practice or requirements. This document specifies general design and construction methods to help designers and manufacturers in achieving explosion safety in the design of equipment, protective systems and components. This document is applicable to any equipment, protective systems and components intended to be used in potentially explosive atmospheres, under atmospheric conditions. These atmospheres can arise from flammable/combustible substances processed, used or released by the equipment, protective systems and components or from materials in the vicinity of the equipment, protective systems and components and/or from the materials of construction of the equipment, protective systems and components. This document is applicable to equipment, protective systems and components at all stages of its use. This document is only applicable to equipment group II which is intended for use in other places than underground parts of mines and those parts of surface installations of such mines endangered by firedamp and/or combustible dust. This document is not applicable to: 1) medical devices intended for use in a medical environment; 2) equipment, protective systems and components where the explosion hazard results exclusively from the presence of explosive substances or unstable chemical substances; 3) equipment, protective systems and components where the explosion can occur by reaction of substances with other oxidizers than atmospheric oxygen or by other hazardous reactions or by other than atmospheric conditions; 4) equipment intended for use in domestic and non-commercial environments where potentially explosive atmospheres may only rarely be created, solely as a result of the accidental leakage of fuel gas; 5) personal protective equipment covered by Regulation (EU) 2016/425; 6) seagoing vessels and mobile offshore units together with equipment on board such vessels or units; 7) means of transport, i.e. vehicles and their trailers intended solely for transporting passengers by air or by road, rail or water networks, as well as means of transport insofar as such means are designed for transporting goods by air, by public road or rail networks or by water; vehicles intended for use in a potentially explosive atmosphere shall not be excluded; 8) the design and construction of systems containing desired, controlled combustion processes, unless they can act as ignition sources in potentially explosive atmospheres.

  Publication

Monday 16th of March 2020

  Related Standards

EN 50495:2010

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Safety devices required for the safe functioning of equipment with respect to explosion risks

EN 60079-25:2010/AC:2013

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Explosive atmospheres - Part 25: Intrinsically safe electrical systemsIEC 60079-25:2010

EN 60079-6:2015

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Explosive atmospheres - Part 6: Equipment protection by liquid immersion "o"IEC 60079-6:2015

EN 60079-7:2015

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Explosive atmospheres - Part 7: Equipment protection by increased safety "e"IEC 60079-7:2015

EN 60079-11:2012

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"IEC 600IEC 60079-11:2011

EN 60079-15:2010

Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

Explosive atmospheres - Part 15: Equipment protection by type of protection "n"IEC 60079-15:2010

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0