Need help?

EN 17677:2024 Standard

wave
Save  

  Keywords:

#deposit #due #document #movement #tray

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 13th of August 2025

  Description:

Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements

  Purpose

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:a)  are intended to be:-  only for professional use;-  used by one operator at a time;-  used to deposit only pasty food (i.e.: cream, dough, batter, etc.);-  used to deposit only on trays;-  used as standalone machines;-  used with manual loading of the dough into the hopper;-  used with manual loading and unloading of the tray/s on/from the tray conveyor.b)  can carry out only the following movements and relevant directions (see Figure 1a)):-  Z: vertical movement of the table and/or the deposit unit;-  X: horizontal movement of the tray conveyor;-  Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;c)  are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;d)  have a total length of the tray conveyor ≤ 1 600 mm;e)  have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));f)  have a deposit performance (see 3.5):-  ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;-  ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;g)  have a trays performance (see 3.6) ≤ 4 trays/minute.This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.1.2 The following hazards are not covered by this document:-  hazards arising from the use of an automatic hopper loading system;-  hazards due to packaging, handling or transport;-  hazards arising from electromagnetic compatibility issues;-  hazards due to dismantling and disassembling;-  hazards due to operational stop;-  hazards due to selection of control or operating modes;-  hazards due to failure of the power supply;-  hazards due to surfaces, edges or angles;-  hazards due to uncontrolled movements;-  hazards due to machinery maintenance.This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.The significant hazards covered by this document are described in Annex B.1.3 The following machines are excluded from the scope of this document:a)  machines which deposit pasty food by means of needles (injection);b)  machines where the trays are put onto and/or removed from the tray conveyor automatically;c)  machines which require a blade for the cutting system;d)  domestic appliances;e)  machines for industrial production;f)  machines to deposit other products than food for bakery and pastry products.1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  Publication

Wednesday 13th of August 2025

  Related Standards

EN 474-4:2022

Machinery (MD) Directive (2006/42/EC)

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

EN ISO 19085-7:2019

Machinery (MD) Directive (2006/42/EC)

Woodworking machines - Safety - Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085...

EN 13886:2005+A1:2010

Machinery (MD) Directive (2006/42/EC)

Food processing machinery - Cooking kettles equipped with powered stirrer and/or mixer - Safety and hygiene requirements

EN 14010:2003+A1:2009

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing...

EN 14238:2004+A1:2009

Machinery (MD) Directive (2006/42/EC)

Cranes - Manually controlled load manipulating devices

EN 14462:2005+A1:2009

Machinery (MD) Directive (2006/42/EC)

Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accurac...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 17677:2024 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0