Need help?

EN IEC 60335-2-58:2025 Standard

wave
Save  

  Keywords:

#used #edition #iec #publication #12

This standard can be totally or partially supervised by:
  •   EN IEC 60335-2-58:2025/A11:2025
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Monday 7th of September 2026

      Description:

    Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines

      Purpose

    IEC 60335-2-58:2017 deals with the safety of electrically operated dishwashing machines for washing plates, dishes, glassware, cutlery and similar articles, with or without means for water heating or drying, not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. These appliances are used for example in restaurants, canteens, hospitals, and commercial enterprises such as bakeries, butcheries, etc. Examples of such appliances are conveyor dishwashers; batch dishwashers and brush machines. Requirements to avoid backsiphonage of non-potable water into the water mains are specified in Annex BB. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. This standard does not apply to the following: appliances designed exclusively for industrial purposes, for example machines used in the food industry for cleaning receptacles that serve as packaging for final products (e.g. bottle-cleaning machines), and machines used in manufacturing processes; sterilizers and washer-disinfectors used to treat medical materials (IEC 61010-2-040); dishwashers that do not form one functional unit, for example where a transportation device transfers the load from one separate unit to another; separately driven transport devices not confined in the appliance; appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This fourth edition cancels and replaces the third edition published in 2002 including its Amendment 1 (2008) and its Amendment 2 (2015). This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The text has been aligned with Edition 5.2 of Part 1; Requirements and tests for vertical-lift doors with and without a counterbalance system are clarified (20.103, 20.104); Some notes have been converted to normative text or deleted (7.15, 9, 10.1, 11.7, 15.3, 19.4, 20.1, 20.102, 22.106, 22.107, 23.3). This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of the fifth edition (2010) of that standard The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of its publication.

      Publication

    Monday 7th of September 2026

      Cessation

    This standard will be withdrawn on 2027-01-20

      Related Standards

    EN ISO 13856-3:2013

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Pressure-sensitive protective devices - Part 3: General principles for design and testing of pressure-sensit...

    EN 60204-31:2013

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, unit...

    EN 60335-2-40:2003/A13:2012/AC:2013

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-condition...

    EN 60335-2-40:2003/A13:2012

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-condition...

    EN 60335-2-40:2003/A12:2005

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-condition...

    EN 60335-2-40:2003/A11:2004

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-condition...

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN IEC 60335-2-58:2025 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0