Need help?

EN ISO 11202:2010 Standard

wave
Save  

  Keywords:

#source #test #grade #standard #international

This standard can be totally or partially supervised by:
  •   EN ISO 11202:2010/A1:2021
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Wednesday 2nd of August 2023

      Description:

    Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)

      Purpose

    This International Standard specifies a method for determining the emission sound pressure levels of machinery or equipment, at a work station and at other specified positions nearby, in situ. A work station is occupied by an operator and may be located in open space, in the room where the source under test operates, in a cab fixed to the source under test, or in an enclosure remote from the source under test. One or more specified positions may be located in the vicinity of a work station, or in the vicinity of an attended or unattended machine. Such positions are sometimes referred to as bystander positions. Emission sound pressure levels are determined as A-weighted levels. Additionally, levels in frequency bands and C-weighted peak emission sound pressure levels can be determined in accordance with this International Standard, if required.Methods are given for determining a local environmental correction (subject to a specified limiting maximum value) to be applied to the measured sound pressure levels in order to eliminate the influence of reflecting surfaces other than the plane on which the source under test is placed. This correction is based on the equivalent sound absorption area of the test room and on radiation characteristics (source location or directivity at the work station). With the method specified in this International Standard, results of accuracy grade 2 (engineering grade) or accuracy grade 3 (survey grade) are obtained. Corrections are applied for background noise and, as described above, for the acoustic environment. Instructions are given for the mounting and operation of the source under test and for the choice of microphone positions for the work station and for other specified positions. One purpose of the measurements is to permit comparison of the performance of different units of a given family of machines, under defined environmental conditions and standardized mounting and operating conditions.

      Publication

    Wednesday 20th of October 2010

      Cessation

    This standard has been withdrawn on 2023-10-11

      Reference

    This standard supersedes the "EN ISO 11202:2009"

    Anyway is still possible use the "EN ISO 11202:2009" until November 30th, 2010

      Related Standards

    EN 16590-1:2014

    Machinery (MD) Directive (2006/42/EC)

    Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for des...

    EN 908:1999+A1:2009

    Machinery (MD) Directive (2006/42/EC)

    Agricultural and forestry machinery - Reel machines for irrigation - Safety

    EN 818-2:1996+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8

    EN 818-3:1999+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4

    EN 818-4:1996+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8

    EN 818-5:1999+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 11202:2010 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0