Need help?

EN ISO 14122-1:2016 Standard

wave
Save  

  Keywords:

#part #applicable #machine #stationary #note

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 2nd of August 2023

  Description:

Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means and general requirements of access (ISO 14122-1:2016)

  Purpose

This part of ISO 14122 gives general requirements for access to stationary machines and guidance about the correct choice of means of access when necessary access to the stationary machine is not possible directly from the ground level or from a floor. It is applicable to permanent means of access which are a part of a stationary machine, and also to nonpowered adjustable parts (e.g. foldable, slidable) and movable parts of fixed means of access. NOTE 1 “Fixed” means of access are those mounted in such a manner (for example, by screws, nuts, welding) that they can only be removed by the use of tools. This part of ISO 14122 specifies minimum requirements that also apply when the same means of access is required as the part of the building or civil construction (e.g. working platforms, walkways, ladders) where the machine is installed, on condition that the main function of that part of the construction is to provide a means of access to the machine. NOTE 2 Where no local regulation or standards exist, this part of ISO 14122 can be used for means of access which are outside the scope of the standard. It is intended that this part of ISO 14122 be used with a relevant access-specific part of ISO 14122. The ISO 14122 series as a whole is applicable to both stationary and mobile machinery where fixed means of access are necessary. It is not applicable to powered means of access such as lifts, escalators, or other devices specially designed to lift persons between two levels. This part of ISO 14122 is not applicable to machinery manufactured before the date of its publication. For the significant hazards covered by this part of ISO 14122, see Clause 4.

  Publication

Friday 9th of September 2016

  Reference

This standard supersedes the "EN ISO 14122-1:2001"

Anyway is still possible use the "EN ISO 14122-1:2001" until December 31st, 2016

  Related Standards

EN 15194:2017

Machinery (MD) Directive (2006/42/EC)

Cycles - Electrically power assisted cycles - EPAC Bicycles

EN 500-4:2011

Machinery (MD) Directive (2006/42/EC)

Mobile road construction machinery - Safety - Part 4: Specific requirements for compaction machines

EN 81-43:2009

Machinery (MD) Directive (2006/42/EC)

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lift...

EN 115-1:2017

Machinery (MD) Directive (2006/42/EC)

Safety of escalators and moving walks - Part 1: Construction and installation

EN 289:2014

Machinery (MD) Directive (2006/42/EC)

Plastics and rubber machines - Compression moulding machines and transfer moulding machines - Safety requirements

EN 303-5:2012

Machinery (MD) Directive (2006/42/EC)

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW ...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 14122-1:2016 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0