Need help?

EN 16474:2015 Standard

wave
Save  

  Keywords:

#tyre #european #standard #hazards #equipment

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 2nd of August 2023

  Description:

Plastics and rubber machines - Tyre curing machines - Safety requirements

  Purpose

This European Standard applies to tyre curing machines having the following configuration. - crossing flow tyre curing machines, with two cavities with: - common curing cycle and common safeguarding; or - independent curing cycles and common safeguarding; or - independent curing cycles and independent safeguarding. - tyre curing machines with one cavity. - tyre curing machines with automatic rear feeding and discharge. The safety requirements and/or protective measures specified in this European Standard apply to tyre curing machines for passenger vehicle tyres and truck tyres. This European Standard does not deal with: - feeding system and discharge system; - tyre curing machines with manual loading of the green tyre into the mould and manual unloading of the cured tyre from the mould; - ancillary equipment which is not an integral part of the tyre curing machine, e.g. conveying equipment; - exhaust systems. This European Standard deals with all significant hazards, hazardous situations and events relevant to tyre curing machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It does not deal with hazards associated with falling of parts of the container or mould. Some tyre curing machines include pressure vessels, which fall under Directive 97/23/EC [1]; this European standard is not intended to support the Directive 97/23/EC. This European Standard is not applicable to tyre curing machines which are manufactured before the date of its publication as an EN. Hazard associated with falling of parts of the container or mould are not covered by this European Standard. Safety requirements relating to the design of ancillary equipment which is not an integral part of the tyre curing press, e.g. conveying equipment are not covered in this European Standard. Safety requirements relating the design of exhaust systems are not covered in this European Standard. This European Standard covers the significant hazards listed in Clause 4. NOTE This European Standard is not intended to support the PED [1]. For pressure hazards, see informative Annex A. This document is not applicable to tyre curing presses which are manufactured before the date of its publication as EN.

  Publication

Friday 15th of January 2016

  Related Standards

EN 16228-4:2014

Machinery (MD) Directive (2006/42/EC)

Drilling and foundation equipment - Safety - Part 4: Foundation equipment

EN 1034-17:2012

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue...

EN 1804-2:2020

Machinery (MD) Directive (2006/42/EC)

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 2: Power set legs and rams

EN 1804-1:2020

Machinery (MD) Directive (2006/42/EC)

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requi...

EN 1459-5:2020

Machinery (MD) Directive (2006/42/EC)

Rough-terrain trucks - Safety requirements and verification - Part 5: Attachment interface

EN 1175:2020

Machinery (MD) Directive (2006/42/EC)

Safety of industrial trucks - Electrical/electronic requirements

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 16474:2015 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0