Need help?

EN 60335-2-36:2002/AC:2007 Standard

wave
Save  

  Keywords:

#iec #edition #publication #irons #new

This standard is superseded by:
  •   EN 60335-2-36:2002/A11:2012
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Wednesday 2nd of August 2023

      Description:

    Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements

      Purpose

    IEC 60335-2-3:2012 deals with the safety of electric dry irons and steam irons, including those with a separate water reservoir or boiler having a capacity not exceeding 5 l, for household and similar purposes, their rated voltage being not more than 250 V. Appliances not intended for normal household use, but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by appliances, which are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction or children playing with the appliance. This standard does not apply to ironers (IEC 60335-2-44); appliances designed exclusively for industrial purposes or appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This sixth edition cancels and replaces the fifth edition published in 2002 including its Amendment 1 (2004) and its Amendment 2 (2008). It constitutes a technical revision. The principal changes in this edition as compared with the fifth edition of IEC 60335-2-3 are as follows (minor changes are not listed): - some notes have been converted to normative text (20.1, 21.102, 22.106, 24.4, 25.5, 25.14); - hoses that are subjected to the pressure test have been identified (22.7) and - the types of flexible cord that can be used are clarified (25.7). The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: dry irons: steam irons

      Publication

    Friday 5th of April 2013

      Correction

    This standard is a correction for "EN 60335-2-36:2002"

      Related Standards

    EN ISO 14122-3:2016

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016)

    EN 60745-2-22:2011/A11:2013

    Machinery (MD) Directive (2006/42/EC)

    Hand-held motor-operated electric tools - Safety - Part 2-22: Particular requirements for cut-off machines

    EN 61310-2:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking

    EN 61310-3:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators

    EN 61800-5-2:2007

    Machinery (MD) Directive (2006/42/EC)

    Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional

    EN 50434:2014

    Machinery (MD) Directive (2006/42/EC)

    Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN 60335-2-36:2002/AC:2007 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0