Need help?

EN ISO 4254-7:2017 Standard

wave
Save  

  Keywords:

#related #applicable #hazards #requirements #provisions

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Thursday 2nd of April 2020

  Description:

Agricultural machinery - Safety - Part 7: Combine harvesters, forage harvesters, cotton harvesters and sugar cane harversters (ISO 4254-7:2017)

  Purpose

ISO 4254-7:2017, when used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. When provisions of ISO 4254-7:2017 are different from those which are stated in ISO 4254-1, the provisions of ISO 4254-7:2017 take precedence over the provisions of ISO 4254-1 for machines that have been designed and built according to the provisions of ISO 4254-7:2017. ISO 4254-7:2017, taken together with ISO 4254-1, deals with all the significant hazards (as listed in Table A.1), hazardous situations and events relevant to combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Annex A). It is not applicable to hazards arising from the presence of persons other than the operator, cleaning of the grain tank, and hazards related to vibrations and moving parts for power transmission, except for strength requirements for guards and barriers. In respect of braking and steering, it is applicable only to the ergonomic aspects (e.g. location of brake pedal and steering wheel); no other aspects related to braking and steering are covered. In the case of trailed harvesters, it is applicable only to hazards related to the working process. Design requirements for roll-over protective structures (if applicable) are not specified in ISO 4254-7:2017. Performance levels (or categories) for safety-related parts of control systems in accordance with ISO 25119 or ISO 13849 are not given in ISO 4254-7:2017. NOTE Specific requirements related to road traffic regulations are not taken into account in ISO 4254-7:2017. ISO 4254-7:2017 is not applicable to machines manufactured before the date of its publication.

  Publication

Thursday 30th of January 2020

  Related Standards

EN 61029-2-5:2011/A11:2015

Machinery (MD) Directive (2006/42/EC)

Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band sawsIEC 61029-2-5:1993 (Modifie...

EN ISO 23125:2015

Machinery (MD) Directive (2006/42/EC)

Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)

EN ISO 17916:2016

Machinery (MD) Directive (2006/42/EC)

Safety of thermal cutting machines (ISO 17916:2016)

EN ISO 18217:2015

Machinery (MD) Directive (2006/42/EC)

Safety of woodworking machines - Edge-banding machines fed by chain(s) (ISO 18217:2015)

EN ISO 19085-1:2017

Machinery (MD) Directive (2006/42/EC)

Woodworking machines - Safety - Part 1: Common requirements (ISO 19085-1:2017)

EN ISO 19085-2:2017

Machinery (MD) Directive (2006/42/EC)

Woodworking machines - Safety - Part 2: Horizontal beam panel circular sawing machines (ISO 19085-2:2017)

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 4254-7:2017 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0