Need help?

EN ISO 13766-2:2018 Standard

wave
Save  

  Keywords:

#electromagnetic #defined #esa #electronic #separate

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Monday 7th of September 2026

  Description:

Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 2: Additional EMC requirements for functional safety (ISO 13766-2:2018)

  Purpose

ISO 13766-2:2018 provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as classified in ISO/TR 12603:2010: - drilling and foundation equipment; - equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement; - road construction and maintenance machinery and equipment. ISO 13766-2:2018 deals with EMC requirements related to the functional safety of the machinery, its electrical/electronic subassemblies (ESA) and of separate ESA. ISO 13766-2:2018 is relevant only to the safety-related parts of control systems (SRP/CS) as defined in ISO 13849‑1:2015 using electrical/electronic components which meet design requirements equal to or greater than safety‑related performance level PL b as defined in ISO 13849‑1:2015. It also deals with electrical and electronic components or separate ESA intended to be fitted on machinery under the restriction of PL b. The following electromagnetic disturbance phenomena are evaluated: - radiated electromagnetic fields from off-board sources with various field strengths and frequencies; - radiated electromagnetic fields from on-board sources (antenna inside/outside) with various field strengths and frequencies; - electrostatic discharge; - conducted and coupled electrical transients. The machinery can have DC or AC or a combination of both as the internal electrical power supply system. ISO 13766-2:2018 is not applicable to machines that are designed to be supplied by an external mains network or to phenomena caused by military applications. NOTE Grid-connected machines are covered by IEC 61000.

  Publication

Tuesday 19th of March 2019

  Cessation

This standard will be withdrawn on 2027-01-20

  Related Standards

EN ISO 28139:2021

Machinery (MD) Directive (2006/42/EC)

Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and te...

EN 15166:2008

Machinery (MD) Directive (2006/42/EC)

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements

EN 16327:2014

Machinery (MD) Directive (2006/42/EC)

Fire-fighting - Positive-pressure proportioning systems (PPPS) and compressed-air foam systems (CAFS)

EN 16307-6:2014

Machinery (MD) Directive (2006/42/EC)

Industrial trucks - Safety requirements and verification - Part 6: Supplementary requirements for burden and personnel carriers

EN ISO 16230-1:2015

Machinery (MD) Directive (2006/42/EC)

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General ...

EN 16191:2014

Machinery (MD) Directive (2006/42/EC)

Tunnelling machinery - Safety requirements

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 13766-2:2018 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0