Need help?

EN 13241:2003+A2:2016 Standard

wave
Save  

  Keywords:

#european #standard #requirements #apply #door

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 2nd of August 2023

  Description:

Industrial, commercial, garage doors and gates - Product standard, performance characteristics

  Purpose

1.1 General This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard. These devices can be manually or power operated. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-3. 1.2 Exclusions This European Standard does not apply to the following which are intended for a different use: — lock gates and dock gates; — doors on lifts; — doors on vehicles; — armoured doors; — doors mainly for the retention of animals; — theatre textile curtains; — horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361; — revolving doors of any size; — railway barriers; — barriers used solely for vehicles. This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition. This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs. This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation. The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive. 1.3 Specific applications This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door. It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade. When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.

  Publication

Saturday 19th of September 2020

  Amendment

This standard is an amendment for "EN 13241:2003"

  Related Standards

EN 12312-18:2005+A1:2009

Machinery (MD) Directive (2006/42/EC)

Aircraft ground support equipment - Specific requirements - Part 18: Nitrogen or Oxygen units

EN 303-5:2012

Machinery (MD) Directive (2006/42/EC)

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW ...

EN ISO 14123-2:2015

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology ...

EN ISO 14159:2008

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

EN ISO 14738:2008

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:200...

EN ISO 15536-1:2008

Machinery (MD) Directive (2006/42/EC)

Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 13241:2003+A2:2016 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0