Need help?

EN 60204-1:2018 Standard

wave
Save  

  Keywords:

#electrical #part #note #electronic #supply

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Thursday 2nd of April 2020

  Description:

Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2016, Modified)

  Purpose

This part of IEC 60204 applies to electrical, electronic and programmable electronic equipment and systems to machines not portable by hand while working, including a group of machines working together in a co-ordinated manner. NOTE 1 This part of IEC 60204 is an application standard and is not intended to limit or inhibit technological advancement. NOTE 2 In this part of IEC 60204, the term “electrical” includes electrical, electronic and programmable electronic matters (i.e. “electrical equipment” means electrical, electronic and programmable electronic equipment). NOTE 3 In the context of this part of IEC 60204, the term “person” refers to any individual and includes those persons who are assigned and instructed by the user or his agent(s) in the use and care of the machine in question. The equipment covered by this part of IEC 60204 commences at the point of connection of the supply to the electrical equipment of the machine (see 5.1). NOTE 4 The requirements for the electrical supply installation are given in the IEC 60364 series. This part of IEC 60204 is applicable to the electrical equipment or parts of the electrical equipment that operate with nominal supply voltages not exceeding 1 000 V for alternating current (AC) and not exceeding 1 500 V for direct current (DC), and with nominal supply frequencies not exceeding 200 Hz. NOTE 5 Information on electrical equipment or parts of the electrical equipment that operate with higher nominal supply voltages can be found in IEC 60204-11. This part of IEC 60204 does not cover all the requirements (for example guarding, interlocking, or control) that are needed or required by other standards or regulations in order to protect persons from hazards other than electrical hazards. Each type of machine has unique requirements to be accommodated to provide adequate safety. This part of IEC 60204 specifically includes, but is not limited to, the electrical equipment of machines as defined in 3.1.40. NOTE 6 Annex C lists examples of machines whose electrical equipment can be covered by this part of IEC 60204. This part of IEC 60204 does not specify additional and special requirements that can apply to the electrical equipment of machines that, for example: – are intended for use in open air (i.e. outside buildings or other protective structures); – use, process, or produce potentially explosive material (for example paint or sawdust); – are intended for use in potentially explosive and/or flammable atmospheres; – have special risks when producing or using certain materials; – are intended for use in mines; – are sewing machines, units, and systems (which are covered by IEC 60204-31); – are hoisting machines (which are covered by IEC 60204-32); – are semiconductor fabrication equipment (which are covered by IEC 60204-33). Power circuits where electrical energy is directly used as a working tool are excluded from this part of IEC 60204.

  Publication

Thursday 2nd of April 2020

  Reference

This standard superseed the "EN 60204-1:2006/A1:2009 (IEC 60204-1:2005/A1:2008)"

  Related Standards

EN 62841-2-2:2014

Machinery (MD) Directive (2006/42/EC)

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular require...

EN 1889-2:2003 +A1:2009

Machinery (MD) Directive (2006/42/EC)

Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives

EN ISO 3691-1:2015

Machinery (MD) Directive (2006/42/EC)

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks,...

EN ISO 3449:2008

Machinery (MD) Directive (2006/42/EC)

Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)

EN 1953:2013

Machinery (MD) Directive (2006/42/EC)

Atomising and spraying equipment for coating materials - Safety requirements

EN 1915-4:2004 +A1:2009

Machinery (MD) Directive (2006/42/EC)

Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 60204-1:2018 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0