Need help?

EN ISO 19085-9:2020 Standard

wave
Save  

  Keywords:

#note #blade #device #hazards #saws

This standard is superseded by:
  •   EN ISO 19085-9:2024 from: 2027-01-20
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Monday 7th of September 2026

      Description:

    Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO 19085-9:2019)

      Purpose

    This document gives the safety requirements and measures for stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit), also known as "table saws" (in the USA), hereinafter referred to as "machines", designed to cut wood and material with similar physical characteristics to wood. NOTE 1 For the definition of stationary and displaceable machine, see ISO 19085-1:2017, 3.4 and 3.5. It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to these machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. It is also applicable to machines fitted with one or more of the following devices, or working unit, whose hazards have been dealt with: — device for the main saw blade and scoring saw blade to be raised and lowered through the table; — device to tilt the main saw blade and scoring saw blade for angled cutting; — device for scoring; — device for grooving with milling tool with a width not exceeding 20 mm in one pass; — demountable power feed unit; — additional manually operated sliding table; — powered work-piece clamping device. NOTE 3 Circular saw benches are used for ripping, cross cutting, dimensioning and grooving. This document does not apply to: a) transportable/displaceable machines intended for outdoor use on building sites; NOTE 4 Building site saws (contractor saws) are covered by the requirements of ISO 19085-10:2018. b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting; c) machines intended for use in a potentially explosive atmosphere; d) machines manufactured before the date of its publication as an International Standard; e) transportable machines with a maximum saw blade diameter of ≤315 mm. NOTE 5 Transportable motor-operated electric tools are dealt with in IEC 62841-1:2014 and IEC 62841-3-1:2014.

      Publication

    Wednesday 3rd of March 2021

      Cessation

    This standard will be withdrawn on 2027-01-20

      Reference

    This standard supersedes the "EN 1870-19:2013"

      Related Standards

    EN 1870-12:2013

    Machinery (MD) Directive (2006/42/EC)

    Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines

    EN 1974:2020

    Machinery (MD) Directive (2006/42/EC)

    Food processing machinery - Slicing machines - Safety and hygiene requirements

    EN 16307-1:2020

    Machinery (MD) Directive (2006/42/EC)

    Industrial trucks - Safety requirements and verification - Part 1: Supplementary requirements for self-propelled industrial trucks...

    EN ISO 16092-4:2020

    Machinery (MD) Directive (2006/42/EC)

    Machine tools safety - Presses - Part 4: Safety requirements for pneumatic presses (ISO 16092-4:2019)

    EN ISO 16092-2:2020

    Machinery (MD) Directive (2006/42/EC)

    Machine tools safety - Presses - Part 2: Safety requirement for mechanical presses (ISO 16092-2:2019)

    EN 15571:2020

    Machinery (MD) Directive (2006/42/EC)

    Machines and plants for mining and tooling of natural stone - Safety - Requirements for surface-finishing machines

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 19085-9:2020 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0