Need help?

EN 1804-1:2020 Standard

wave
Save  

  Keywords:

#support #document #can #hazards #components

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 13th of August 2025

  Description:

Machines for underground mines - Safety requirements for hydraulic powered roof supports - Part 1: Support units and general requirements

  Purpose

This document stipulates the safety requirements for the use of support units intended by the manufacturer. Examples of support units are: frame supports, chock supports, shield supports, paired frames and push-pull support systems including the components of advancing and anchoring devices which provide support functions. This document excludes fixing elements on the conveyor, coal-winning equipment, power set legs and rams, valves, hydraulic and electro-hydraulic control units, lighting and signalling facilities and other ancillary equipment. NOTE Some components are discussed in other parts of this series of standards. This document applies for support units that are used at ambient temperatures between −10 °C and 60 °C. This document also applies to support components and support accessories which are provided if the support unit is fitted with stowing equipment. This document identifies and takes account of: - the hazards that can possibly be induced through operation of the support units; - the hazardous areas and the operating conditions that can cause any type of hazard; - the situations that can result in hazards that cause an injury or impair health; - dangers that can be caused through mine gas and/or flammable dusts. This document describes methods for reducing these hazards. Clause 4 contains a list of the hazards discussed. This document does not specify any additional requirements for: - a particularly corrosive environment; - risks associated with manufacturing, transport and decommissioning; - earthquake. A complete hydraulic powered roof support consists of the support units (EN 1804-1:2020), legs and support rams (EN 1804-2:2020) and the hydraulic and electro hydraulic controls (EN 1804-3:2020). Each part of this multipart document addresses the safety requirements of the components mentioned in the scopes of the respective parts of this multipart series. This document is not applicable to all support units manufactured before the date of its publication.

  Publication

Friday 15th of October 2021

  Related Standards

EN 15268:2008

Machinery (MD) Directive (2006/42/EC)

Petrol filling stations - Safety requirements for the construction of submersible pump assemblies

EN 60335-2-47:2003/AC:2007

Machinery (MD) Directive (2006/42/EC)

Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans

EN 50348:2010

Machinery (MD) Directive (2006/42/EC)

Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

EN 50348:2010/AC:2010

Machinery (MD) Directive (2006/42/EC)

Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements

EN 50434:2014

Machinery (MD) Directive (2006/42/EC)

Safety of household and similar appliances - Particular requirements for mains operated shredders and chippers

EN 50636-2-91:2014

Machinery (MD) Directive (2006/42/EC)

Household and similar electrical appliances - Safety - Part 2-91: Particular requirements for walk-behind and hand-held lawn trimm...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 1804-1:2020 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0