Need help?

EN ISO 20430:2020 Standard

wave
Save  

  Keywords:

#injection #document #design #machines #sole

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 13th of August 2025

  Description:

Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)

  Purpose

This document specifies the essential safety requirements for the design and construction of injection moulding machines for the processing of plastics and/or rubber and provides information for their safe use. This document is applicable only to injection moulding machines with hydraulic and/or electrical drives for platen movement. This document deals with all significant hazards, hazardous situations and events relevant to injection moulding machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A) during the life cycle of the machinery (see ISO 12100:2010, 5.4). The following are not covered: — machines on which the clamping unit can only be operated by the physical force of the operator; — machines for which the hydraulic jack can only be manually operated; — injection blow moulding machines; — machines for reaction injection moulding; — compression moulding machines and transfer moulding machines; — direct-on sole moulding machines, unit sole and footwear component moulding machines, full shoe and boot moulding machines; — design of an exhaust system; — design and construction of the mould. NOTE Moulds and exhaust systems are not part of the machinery. This document is not applicable to injection moulding machines which are manufactured before the date of its publication.

  Publication

Friday 15th of October 2021

  Related Standards

EN ISO 16119-3:2013

Machinery (MD) Directive (2006/42/EC)

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 3: Sprayers for bush and tree crops (ISO 1611...

EN 12110:2014

Machinery (MD) Directive (2006/42/EC)

Tunnelling machines - Air locks - Safety requirements

EN ISO 11553-2:2008

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:...

EN ISO 11553-3:2013

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machi...

EN ISO 11554:2017

Machinery (MD) Directive (2006/42/EC)

Optics and photonics - Lasers and laser-related equipment - Test methods for laser beam power, energy and temporal characteristics...

EN 12001:2012

Machinery (MD) Directive (2006/42/EC)

Conveying, spraying and placing machines for concrete and mortar - Safety requirements

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 20430:2020 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0