Need help?

EN ISO 3747:2009 Standard



#source #values #test #reference #level

This standard is superseded by:
  •   EN ISO 3747:2010
  •   This standard is no longer addressed in the last official Journal publication of the "2023-01-09 ". This standard is addressed for the last time in the official journal publication of the "2011-04-08"


    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Friday 8th of April 2011


    Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ (ISO 3747:2000)


    This International Standard specifies a method for determining the sound power levels of sound sources insitu, especially if non-movable. A comparison method is used and all measurements are carried out in octavebands. The measurement uncertainty depends on the test environment. The measurement uncertainty is evaluatedby comparing with an indicator describing the spatial sound distribution. The accuracy will either be that of anengineering method or a survey method.The sound power level of the source under test is calculated from the measured values of the sound pressurelevels produced at specified measurement points by the source and by a reference sound source, respectively. Thesound power level is calculated using the calibrated values of the reference sound source and the differencesbetween the values obtained with the source under test and those of the reference sound source. All calculationsare carried out in octave bands, from which the A-weighted sound power level is determined.


    Friday 18th of December 2009


    This standard has been withdrawn on 2011-06-30

      Related Standards

    EN 547-2:1996/A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings

    EN 17059:2018

    Machinery (MD) Directive (2006/42/EC)

    Plating and anodizing lines - Safety requirements

    EN 62841-2-14:2015

    Machinery (MD) Directive (2006/42/EC)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-14: Particular requir...

    EN 1175:2020

    Machinery (MD) Directive (2006/42/EC)

    Safety of industrial trucks - Electrical/electronic requirements

    EN 12999:2020

    Machinery (MD) Directive (2006/42/EC)

    Cranes - Loader cranes

    EN 62841-2-10:2017

    Machinery (MD) Directive (2006/42/EC)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-10: Particular requir...

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.



    Search for a standard


    Already a member?


    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0