Need help?

EN ISO 4254-1:2013 Standard

wave
Save  

  Keywords:

#part #hazards #applicable #machine #machines

This standard is superseded by:
  •   EN ISO 4254-1:2015
  •   EN ISO 4254-1:2015/A1:2021
  •   This standard is no longer addressed in the last official Journal publication of the "2023-08-02 ". This standard is addressed for the last time in the official journal publication of the "2016-05-13"

      Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Friday 13th of May 2016

      Description:

    Agricultural machinery - Safety - Part 1: General requirements (ISO 4254-1:2013)

      Purpose

    This part of ISO 4254 specifies the safety requirements and their verification for the design and construction of self-propelled ride on machines and mounted, semi-mounted or trailed machines used in agriculture in order to deal with the hazards which are typical for most of the machines. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer. This part of ISO 4254 deals with significant hazards (as listed in Annex A), hazardous situations and events relevant to this agricultural machinery used as intended and under the conditions foreseen by the manufacturer (see Clause 4) during normal operation and routine service. This part of ISO 4254 is not applicable to — agricultural or forestry tractors, — aircraft and air-cushion vehicles used in agriculture, — lawn and garden equipment, — machine-specific components or functions (e.g. working tools and/or processes). This part of ISO 4254 is not applicable to hazards related to periodic service, machine conversion and repairs intended to be carried out by professional service personnel, environmental hazards, road safety (e.g. steering, braking), or to the power take-off (PTO) drive shaft; neither is it applicable to guards of moving parts for power transmission except for strength requirements for guards and barriers. This part of ISO 4254 is not applicable to machines which are manufactured before the date of its publication. Not all of the hazards dealt with by this part of ISO 4254 are necessarily present on a particular machine. A risk assessment should be carried out by the manufacturer to determine the hazards that are applicable and any hazards in addition to those dealt with by this part or a relevant machine-specific part. The requirements of a machine-specific part of ISO 4254 take precedence over the requirements of this part.

      Publication

    Thursday 28th of November 2013

      Cessation

    This standard has been withdrawn on 2016-05-13

      Related Standards

    EN 50580:2012/A1:2013

    Machinery (MD) Directive (2006/42/EC)

    Safety of hand-held electric motor operated tools - Particular requirements for spray guns

    EN 12978:2003+A1:2009

    Machinery (MD) Directive (2006/42/EC)

    Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test meth...

    EN 12855:2003+A1:2010

    Machinery (MD) Directive (2006/42/EC)

    Food processing machinery - Rotating bowl cutters - Safety and hygiene requirements

    EN 12881-2:2005+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

    EN 12921-1:2005+A1:2010

    Machinery (MD) Directive (2006/42/EC)

    Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements

    EN 12921-2:2005+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using wa...

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 4254-1:2013 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0