Need help?

EN 12261:2024 Standard

wave
Save  

  Keywords:

#10 #used #annex #locations #document

  Directive

Measuring instruments (MID) Directive (2014/32/EU)

  Last Official Journal reference

Wednesday 24th of September 2025

  Description:

Gas meters - Turbine gas meters

  Purpose

This document specifies the measuring conditions, requirements and tests for the construction, performance and safety of class 1,0 axial and radial turbine gas meters with mechanical indicating devices, hereinafter referred to as a meter(s), having in-line pipe connections for gas flow measurement. This document applies to turbine gas meters used to measure the volume of fuel gases of the 1st and 2nd gas families, the composition of which is specified in EN 437:2021, at maximum working pressures up to 420 bar, actual flow rates up to 25 000 m3/h over a gas temperature range of at least 40 K and for a climatic environmental temperature range of at least 50 K. This document applies to meters that are installed in locations with vibration and shocks of low significance and in: -  closed locations (indoor or outdoor with protection as specified by the manufacturer) with condensing or with non-condensing humidity; or, if specified by the manufacturer, -  open locations (outdoor without any covering) with condensing humidity or with non-condensing humidity; and in locations with electromagnetic disturbances. Unless otherwise specified in this document: -  all pressures used are gauge; -  all influence quantities, except the one under test, are kept relatively constant at their reference value. Clauses 1 to 7 and Annex B are for design and type testing only, with the exception of 6.2.4.3, 6.2.5.3, 6.7.1.2.2 and 6.7.2.2.2. Annex C can be used to provide guidance on periodic tests during use. Clause 8 and Annexes D and E are for each meter prior to dispatch. Annex A is intended to be used for both type and individual testing. Annex F is intended to be used for individual testing. Annex G is intended to be used for design.

  Publication

Wednesday 26th of February 2025

  Related Standards

EN 62058-31:2010

Measuring instruments (MID) Directive (2014/32/EU)

Electricity metering equipment (a.c.) - Acceptance inspection - Part 31: Particular requirements for static meters for active ener...

EN 62058-21:2010

Measuring instruments (MID) Directive (2014/32/EU)

Electricity metering equipment (a.c.) - Acceptance inspection - Part 21: Particular requirements for electromechanical meters for ...

EN 1359:2017

Measuring instruments (MID) Directive (2014/32/EU)

Gas meters - Diaphragm gas meters

EN 14236:2018

Measuring instruments (MID) Directive (2014/32/EU)

Ultrasonic domestic gas meters

EN 1434-6:2022

Measuring instruments (MID) Directive (2014/32/EU)

Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance

EN 1434-5:2022

Measuring instruments (MID) Directive (2014/32/EU)

Thermal energy meters - Part 5: Initial verification tests

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0