Need help?

EN 14605:2005/A1:2009 Standard

wave
Save  

  Keywords:

#protective #boots #visors #piece #examples

  This standard is no longer addressed in the last official Journal publication of the "2026-06-12 ". This standard is addressed for the last time in the official journal publication of the "2022-12-06"

  Directive

Personal protective equipment Regulation ((EU) 2016/425)

  Last Official Journal reference

Tuesday 6th of December 2022

  Description:

Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])

  Purpose

This document specifies the minimum requirements for the following types of limited use and reusable chemical protective clothing: - Full-body protective clothing with liquid-tight connections between different parts of the clothing (Type 3: liquid-tight clothing) and, if applicable, with liquid-tight connections to component parts, such as hoods, gloves, boots, visors or respiratory protective equipment, which may be specified in other European Standards. Examples of such clothing are one-piece coveralls or two-piece suits, with or without hood or visors, with or without boot-socks or over-boots, with or without gloves; - Full-body protective clothing with spray-tight connections between different parts of the clothing (Type 4: spray-tight clothing) and, if applicable, spray-tight connections to component parts, such as hoods, gloves, boots, visors or respiratory protective equipment, which may be specified in other European Standards. Examples of such clothing are one-piece coveralls or two-piece suits, with or without hood or visors, with or without boot-socks or over-boots, with or without gloves; - Partial body protection garments offering protection to specific parts of the body against permeation of chemical liquids. Examples of such garments are e.g. laboratory coats, jackets, trousers, aprons, sleeves, hoods (not air-supplied) etc. As partial body protection leaves some parts of the body unprotected this document specifies only the performance requirements for the clothing material and the seams.

  Publication

Tuesday 27th of March 2018

  Amendment

This standard is an amendment for "EN 14605:2005"

  Reference

This standard supersedes the "EN 14605:2005"

  Related Standards

EN 14435:2004

Personal protective equipment Regulation ((EU) 2016/425)

Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used...

EN 1073-1:2016+A1:2018

Personal protective equipment Regulation ((EU) 2016/425)

Protective clothing against solid airborne particles including radioactive contamination - Part 1: Requirements and test methods f...

EN 358:2018

Personal protective equipment Regulation ((EU) 2016/425)

Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning...

EN 388:2016+A1:2018

Personal protective equipment Regulation ((EU) 2016/425)

Protective gloves against mechanical risks

EN 510:2019

Personal protective equipment Regulation ((EU) 2016/425)

Specification for protective clothing for use where there is a risk of entanglement with moving parts

EN 943-1:2015+A1:2019

Personal protective equipment Regulation ((EU) 2016/425)

Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performan...

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0