Need help?

EN 10253-4:2025 Standard

wave
Save  

  Keywords:

#pressure #standard #butt #technical #material

  Directive

Pressure equipment Directive (2014/68/EU)

  Last Official Journal reference

Monday 12th of January 2026

  Description:

Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements

  Purpose

This document specifies the technical delivery requirements for seamless and welded butt-welding fittings (elbows, concentric and eccentric reducers, equal and reducing tees, caps) made of austenitic and austenitic-ferritic (duplex) stainless steel in two test-categories which are intended for pressure purposes at room temperature, at low temperature or at elevated temperatures, and for the transmission and distribution of fluids and gases. It specifies: a)  type of fittings; 1)  type A: butt-welding fittings with reduced pressure factor; 2)  type B: butt-welding fittings for use at full service pressure; b)  steel grades and their chemical compositions; c)  mechanical properties; d)  dimensions and tolerances; e)  requirements for inspection and testing; f)  inspection documents; g)  marking; h)  protection and packaging. NOTE  The selection of the appropriate fitting (material, thickness) is the ultimate responsibility of the manufacturer of the pressure equipment (see European Legislation for Pressure Equipment). In the case of a harmonized supporting standard for materials, presumption of conformity to the ESRs is limited to technical data of materials in the standard and does not presume adequacy of the material to a specific item of equipment. Consequently, it is essential that the technical data stated in the material standard be assessed against the design requirements of this specific item of equipment to verify that the ESRs of the PED are satisfied.

  Publication

Monday 12th of January 2026

  Related Standards

EN 12952-8:2002

Pressure equipment Directive (2014/68/EU)

Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boil...

EN 12952-8:2022

Pressure equipment Directive (2014/68/EU)

Water-tube boilers and auxiliary installations - Part 8: Requirements for firing systems for liquid and gaseous fuels for the boil...

EN ISO 21009-2:2015

Pressure equipment Directive (2014/68/EU)

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Operational requirements (ISO 21009-2:2015)

EN ISO 21013-3:2016

Pressure equipment Directive (2014/68/EU)

Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 3: Sizing and capacity determination (ISO 21013-3:201...

EN ISO 21028-1:2016

Pressure equipment Directive (2014/68/EU)

Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-...

EN 15776:2022

Pressure equipment Directive (2014/68/EU)

Unfired pressure vessels - Requirements for the design and fabrication of pressure vessels and pressure vessel parts constructed f...

  Stay up to date

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0