Need help?

EN 301 489-52 V1.3.1 Standard

wave
Save  

  Keywords:

#etsi #present #imt #document #specifications

  Directive

Radio equipment Directive (2014/53/EU)

  Last Official Journal reference

Friday 4th of September 2026

  Description:

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 52: Specific conditions for Cellular Communication User Equipment (UE) radio and ancillary equipment; Harmonised Standard for ElectroMagnetic Compatibility

  Purpose

The present document specifies the applicable test conditions, performance assessment, and performance criteria for Cellular Communication User Equipment (UE), including Customer Premise Equipment (CPE), Set Top Box (STB) containing cellular communication technologies, and the associated ancillary equipment in respect of ElectroMagnetic Compatibility (EMC) for equipment utilizing the technologies in table 1.Table 1: Technologies User Equipment (UE) radio and ancillary equipment Cellular CommunicationCellular Mobile Communication Technology; Technology Generation; Standard Set; ETSI DeliverableGlobal System for Mobile communications (GSM); 2G/3G; IMT-2000 SC single carrier; ETSI EN 301 511CDMA Multi-Carrier (cdma2000); 2G/3G; IS-95/CDMA2000 - IMT-MC multi-carrier; ETSI EN 301 908-4CDMA Direct Spread (UTRA FDD); 3G; IMT-2000 Direct Spread; ETSI EN 301 908-2Evolved Universal Terrestrial Radio Access (E-UTRA); 4G; IMT-advanced; ETSI EN 301 908-13New Radio (NR); 5G; IMT-2020; ETSI TS 138 521-1, ETSI TS 138 521-2, ETSI TS 138 521-3Technical specifications related to the antenna port of radio equipment, radiated emissions from the enclosure port of radio equipment, and combinations of radio and associated ancillary equipment are not included in the present document. Such technical specifications are normally found in the relevant product standards for the effective use of the radio spectrum.NOTE 1: The relationship between the present document and the essential requirements of article 3.1(b) of Directive 2014/53/EU is given in annex A.NOTE 2: The present document does not cover the radio base stations as specified in ETSI EN 301 489-50.Technical specifications related to conducted emission EMC requirements below 9 kHz on the AC mains port of radio equipment are not included in the present document.NOTE 3: Such technical specifications are normally found in the relevant product family standards for AC mains powered equipment (e.g. EN 61000-3-2 and EN 61000-3-3).

  Publication

Thursday 15th of May 2025

  Related Standards

EN 300 065 V2.1.2

Radio equipment Directive (2014/53/EU)

Narrow-band direct-printing telegraph equipment for receiving meteorological or navigational information (NAVTEX); Harmonised Stan...

EN 300 086 V2.1.2

Radio equipment Directive (2014/53/EU)

Land Mobile Service; Radio equipment with an internal or external RF connector intended primarily for analogue speech; Harmonised ...

EN 300 674-2-1 V3.1.1

Radio equipment Directive (2014/53/EU)

Transport and Traffic Telematics (TTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s...

EN 301 025 V2.3.1

Radio equipment Directive (2014/53/EU)

VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling...

EN 301 489-20 V2.2.1

Radio equipment Directive (2014/53/EU)

ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 20: Specific conditions for Mobile Earth Stati...

EN 303 258 V1.1.1

Radio equipment Directive (2014/53/EU)

Wireless Industrial Applications (WIA); Equipment operating in the 5 725 MHz to 5 875 MHz frequency range with power levels rangin...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 301 489-52 V1.3.1 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0