Need help?

EN 300 224 V2.1.1 Standard

wave
Save  

  Keywords:

#equipment #document #present #radio #system

  Directive

Radio equipment Directive (2014/53/EU)

  Last Official Journal reference

Friday 4th of September 2026

  Description:

Land Mobile Service; Radio Equipment for use in a Paging Service operating within the frequency range 25 MHz - 470 MHz; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU

  Purpose

The present document applies to on-site and wide area paging equipment, operating in the frequency range of 25 MHz to 470 MHz. An on-site paging system is a privately owned and operated wireless communication system, used in a restricted and predefined area, with the primary function to alert and/or inform ambulant people. The air interface of the system, using a single radio channel, comprises at least one transmitter. The system may be extended to include a return, or talk-back frequency. Mainly used for call acknowledgement, this frequency may also be used to supply some of the features of a mobile radio service, or other two-way radio services, without the need to use a separate system. Covering a larger geographical area, a wide-area system is typically associated with large organizations such as emergency services and may include additional radio facilities and utilize different a frequency for return messaging, which is outside the scope of the present document. These features should be tested against the relevant standard. The present document specifies technical characteristics and methods of measurements for the following equipment types: 1) base station transmitters and transcoders, with or without an external 50 Ω antenna connector; 2) base station receivers, with a permanent 50 Ω connector; 3) paging receiver, with or without an external 50 Ω antenna connector. These radio equipment types are capable of operating in all or any part of the frequency bands given in table 1. Table 1: Radiocommunications service frequency bands Radiocommunications service frequency bands Transmit 25 MHz to 470 MHz Receive 25 MHz to 470 MHz NOTE: Frequencies and frequency bands, used for on-site paging equipment, are not harmonised throughout the community. The frequency band 47 MHz to 47,25 MHz and operating frequencies or operating bands within 440 MHz to 470 MHz, are recommended by CEPT/ECC in Report 25 [i.5]. The existence of a Harmonised Standard does not imply the availability of the above frequency spectrum for the particular types of equipment covered by the present document. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU under the conditions identified in annex A and contains requirements to demonstrate that "... Radio equipment shall be so constructed that it both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.1]. In addition to the present document, other ENs that specify technical requirements in respect of essential requirements under other parts of article 3 of the Radio Equipment Directive [i.1] may apply to equipment within the scope of the present document.

  Publication

Friday 13th of October 2017

  Reference

This standard supersedes the "EN 300 224-2 V1.1.1"

  Essential Requirement

Article 3(2)

  Related Standards

EN 50385:2017

Radio equipment Directive (2014/53/EU)

Product standard to demonstrate the compliance of base station equipment with radiofrequency electromagnetic field exposure limits...

EN 300 422-1 V2.2.1

Radio equipment Directive (2014/53/EU)

Wireless Microphones; Audio PMSE up to 3 GHz; Part 1: Audio PMSE Equipment up to 3 GHz; Harmonised Standard for access to radio sp...

EN 303 372-2 V1.2.1

Radio equipment Directive (2014/53/EU)

Satellite Earth Stations and Systems (SES); Satellite broadcast reception equipment; Part 2: Indoor unit

EN 303 413 V1.2.1

Radio equipment Directive (2014/53/EU)

Satellite Earth Stations and Systems (SES); Global Navigation Satellite System (GNSS) receivers; Radio equipment operating in the ...

EN 303 758 V1.1.1

Radio equipment Directive (2014/53/EU)

TETRA radio equipment using non-constant envelope modulation operating in a channel bandwidth of 25 kHz, 50 kHz, 100 kHz or 150 kH...

EN 300 718-1 V2.2.1

Radio equipment Directive (2014/53/EU)

Avalanche Beacons operating at 457 kHz; Transmitter-receiver systems; Part 1: Harmonised Standard for access to radio spectrum

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 300 224 V2.1.1 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0