Need help?

EN 13852-1:2013 Standard

wave
Save  

  Keywords:

#european #standard #general #temperature #lifting

This standard is superseded by:
  •   EN 13852-1:2025
  •   Directive

    Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

      Last Official Journal reference

    Thursday 3rd of September 2026

      Description:

    Cranes - Offshore cranes - Part 1: General-purpose offshore cranes

      Purpose

    This European Standard specifies the requirements for general-purpose offshore cranes including their supporting pedestals or structures. The standard is applicable to general-purpose offshore cranes covered by the scope of this European Standard which are manufactured after the date of its publication as EN. This European Standard is not applicable to general-purpose offshore cranes which are manufactured before the date of its publication as an EN. This European Standard does not cover use of - or hazards relating to the following: a)  fabrication, transportation, assembly, dismantling, disabling, scrapping or changing the configuration of the crane; b)  lifting accessories, i.e. any item between the hook and the load; c)  minimum design temperature below −20 °C; d)  operations at an ambient temperature above 45 °C; NOTE:  For equipment designed for operation in explosive atmospheres, the normal ambient temperature range is −20 °C to +40 °C, unless otherwise specified and marked. See Annex O and relevant standards indicated for complete information. e)  lifting operations involving more than one crane; f)  accidental loads due to collisions; g)  hand powered cranes and other cranes with a rated capacity less than 2 t or outreach less than 8 m; h)  emergency rescue operations; (except training) i)  subsea lifting operations. The significant hazards covered by this European standard are identified in Clause 4. This European Standard includes requirements for the lifting of personnel by a general-purpose offshore crane.

      Publication

    Wednesday 20th of April 2016

      Cessation

    This standard will be withdrawn on 2027-07-14

      Related Standards

    EN 12621:2006+A1:2010

    Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

    Machinery for the supply and circulation of coating materials under pressure - Safety requirements

    EN 50176:2025

    Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

    Automatic electrostatic application system for ignitable liquid coating materials - Safety requirements

    EN 14034-3:2006+A1:2011

    Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

    Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds

    EN 14034-2:2006+A1:2011

    Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

    Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (...

    EN 14034-1:2004+A1:2011

    Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

    Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust c...

    EN 12757-1:2005+A1:2010

    Equipment for explosive atmospheres (ATEX) Directive (2014/34/EU)

    Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing

      Stay up to date

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0