Need help?

EN 12693:2026 Standard

wave
Save  

  Keywords:

#document #applicable #hermetic #used #loads

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Monday 7th of September 2026

  Description:

Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors

  Purpose

This document is applicable to positive displacement refrigerant compressors for stationary and mobile refrigerating systems and heat pumps, hereafter called compressors. It is applicable for compressors used in commercial and industrial appliances and with electrical energy supply including integral motors, up to 1 000 VAC and 1 500 VDC. It is applicable to open drive, semi hermetic and hermetic motor compressors, which contain a positive compression function. This document is not applicable to: -  compressors used in household appliance for which EN IEC 60335-2-34 applies; -  compressors using water or air as refrigerant; -  compressors in vehicle air conditioning systems covered by a specific product standard, e.g. ISO 13043. This document does not deal with requirements for emission of noise. NOTE 1  Compressors for automotive comfort air conditioning systems can be developed according e.g. SAE J 639. NOTE 2  Noise emission depends on the complete installation of the built-in compressors and the corresponding operating conditions. For semi-hermetic and open drive compressors which include moving parts and for which the external envelope is primarily designed for mechanical loads, thermal loads (to limit the possible deformation due to temperature), stiffness of the structure (external mechanical loads and weight of the equipment), taking into account established safe industrial practice, it is considered that pressure is not a significant design factor. Attached parts covering other functions e.g. oil separators, oil coolers, suction accumulators comply to EN 14276-1 or EN 13445-6 (cast iron) or EN 13445-8 (aluminium) or show compliance to the relevant European requirements. This is applicable also to shells for hermetic compressors either welded or with any kind of permanent joint. Requirements for compressors used in explosive atmospheres are not covered by this document. NOTE 3  For further guidance see EN 1127-1. This document deals with significant hazards, hazardous situations and events relevant to compressors, when they are used as intended and under conditions for misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document specifies safety requirements for the design, construction, manufacture and testing, documentation and marking of compressors, including integral accessories, e.g. shut-off valve, if necessary. This document relates to the compressor itself which is to be incorporated in a refrigerating system. This document is not applicable to compressors as specified in the scope which are manufactured before the date of publication.

  Publication

Monday 7th of September 2026

  Cessation

This standard will be withdrawn on 2027-01-20

  Related Standards

EN ISO 14982:2009

Machinery (MD) Directive (2006/42/EC)

Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)

EN 16474:2015

Machinery (MD) Directive (2006/42/EC)

Plastics and rubber machines - Tyre curing machines - Safety requirements

EN 16029:2012

Machinery (MD) Directive (2006/42/EC)

Ride-on, motorized vehicles intended for the transportation of persons and not intended for use on public roads - Single-track two...

EN ISO 16089:2015

Machinery (MD) Directive (2006/42/EC)

Machine tools - Safety - Stationary grinding machines (ISO 16089:2015)

EN ISO 16093:2017

Machinery (MD) Directive (2006/42/EC)

Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)

EN ISO 16119-1:2013

Machinery (MD) Directive (2006/42/EC)

Agricultural and forestry machinery - Environmental requirements for sprayers - Part 1: General (ISO 16119-1:2013)

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 12693:2026 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0