Need help?

EN ISO 19085-15:2025 Standard

wave
Save  

  Keywords:

#presses #frequency #document #high #device

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Monday 7th of September 2026

  Description:

Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2025)

  Purpose

1.1    This document specifies the safety requirements and measures for —    cold presses, —    hot presses, —    bending presses, —    edge/face gluing presses, —    membrane presses, and —    embossing presses, where the pressing force is applied by hydraulic, pneumatic or electrical actuators pushing two flat or shaped surfaces against each other, capable of continuous production use, altogether referred to as “machines”. This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account. 1.2    This document is applicable to machines fitted with one or more of the following devices or additional working units, whose hazards have been dealt with: a)    a device for hot gluing; b)    a device for high-frequency gluing in the frequency range from 1 MHz to 400 MHz; c)    a device for high-frequency shaping in the frequency range from 1 MHz to 400 MHz; d)    an automatic workpiece loading and unloading system; e)    an intermediate additional platen; f)    a workpiece extractor; g)    a horizontal pressing system; h)    split moveable platens. 1.3    The machines are designed to process workpieces consisting of: a)    solid wood; b)    materials with similar characteristics to wood (see ISO 19085-1:2021, 3.2), except those with light alloy laminates/edges/profiles for high-frequency presses; c)    wood-based material such as chipboard, fibreboard and plywood composed/laminated with steel sheets/edges/profiles, except for high-frequency presses; d)    honeycomb board; e)    composite boards made from the materials listed above. 1.4    This document does not deal with any hazards related to: —    specific devices that differ from the list above; —    hot fluid heating systems internal to the machine other than electrical; —    any hot fluid heating systems external to the machine; —    operation of taking intermediate platens out and in again; —    the combination of a single machine being used with any other machine (as part of a line). 1.5    This document is not applicable to: —    frame presses; —    membrane presses where the pressing force is applied by vacuum only; —    presses for producing chipboard, fibreboard, OSB; —    machines intended for use in potentially explosive atmosphere; — machines manufactured before the date of publication of this document.

  Publication

Monday 7th of September 2026

  Cessation

This standard will be withdrawn on 2027-01-20

  Related Standards

EN 12779:2015

Machinery (MD) Directive (2006/42/EC)

Safety of woodworking machines - Chip and dust extraction systems with fixed installation - Safety requirements

EN ISO 23125:2015

Machinery (MD) Directive (2006/42/EC)

Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)

EN 15695-2:2017

Machinery (MD) Directive (2006/42/EC)

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Fil...

EN 15861:2012

Machinery (MD) Directive (2006/42/EC)

Food processing machinery - Smokehouses - Safety and hygiene requirements

EN ISO 16093:2017

Machinery (MD) Directive (2006/42/EC)

Machine tools - Safety - Sawing machines for cold metal (ISO 16093:2017)

EN ISO 16230-1:2015

Machinery (MD) Directive (2006/42/EC)

Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General ...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 19085-15:2025 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0