Need help?

EN ISO 23125:2015 Standard

wave
Save  

  Keywords:

#turning #international #standard #controlled #hazards

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Thursday 2nd of April 2020

  Description:

Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)

  Purpose

This International Standard specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of turning machines and turning centres, which are designed primarily to shape metal by cutting. — Group 1: Manually controlled turning machines without numerical control. — Group 2: Manually controlled turning machines with limited numerically controlled capability. — Group 3: Numerically controlled turning machines and turning centres. — Group 4: Single- or multi-spindle automatic turning machines. NOTE 1 For detailed information on the machine groups, see the definitions in 3.4 and mandatory and optional modes of operation in 3.3. NOTE 2 Requirements in this International Standard are, in general, applicable to all groups of turning machines. If requirements are applicable to some special group(s) of turning machines only, then the special group(s) of turning machine(s) is/are specified. NOTE 3 Hazards arising from other metalworking processes (e.g. grinding and laser processing) are covered by other International Standards (see Bibliography). This International Standard covers the significant hazards listed in Clause 4 and applies to ancillary devices (e.g. for workpieces, tools and work clamping devices, handling devices and chip handling equipment), which are integral to the machine. This International Standard also applies to machines which are integrated into an automatic production line or turning cell inasmuch as the hazards and risks arising are comparable to those of machines working separately. This International Standard also includes a minimum list of safety-relevant information which the manufacturer has to provide to the user. See also ISO 12100:2010, Figure 2, which illustrates the interaction of manufacturer’s and user’s responsibility for the operational safety. The user’s responsibility to identify specific hazards (e.g. fire and explosion) and reduce the associated risks can be critical (e.g. whether the central extraction system is working correctly). Where additional processes (milling, grinding, etc.) are involved, this International Standard can be taken as a basis for safety requirements; for specific information see the Bibliography. This International Standard applies to machines that are manufactured after the date of issue of this International Standard.

  Publication

Friday 9th of March 2018

  Reference

This standard superseed the "EN ISO 23125:2010"

Anyway is still possible use the "EN ISO 23125:2010" until February 29th, 2016

  Related Standards

EN ISO 5136:2009

Machinery (MD) Directive (2006/42/EC)

Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003...

EN 15997:2011/AC:2012

Machinery (MD) Directive (2006/42/EC)

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

EN 15830:2012

Machinery (MD) Directive (2006/42/EC)

Rough-terrain variable reach trucks - Visibility - Test methods and verification

EN 15861:2012

Machinery (MD) Directive (2006/42/EC)

Food processing machinery - Smokehouses - Safety and hygiene requirements

EN 15895:2011

Machinery (MD) Directive (2006/42/EC)

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

EN 15949:2012

Machinery (MD) Directive (2006/42/EC)

Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN ISO 23125:2015 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0