Need help?

EN 848-3:2012 Standard

wave
Save  

  Keywords:

#document #combined #designed #applicable #machines

  This standard is no longer addressed in the last official Journal publication of the "2023-08-02 ". This standard is addressed for the last time in the official journal publication of the "2021-03-03"

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Wednesday 3rd of March 2021

  Description:

Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines

  Purpose

This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4, which are relevant to NC boring machines, NC routing machines and NC combined boring/routing machines (as defined in 3.1) herein after referred to as "machines" designed to cut solid wood, chip board, fibreboard, plywood and also these materials where these are covered with plastic/light alloy laminate or edgings when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. This document also applies to machines fitted with: - additional equipment for sawing, sanding, edge banding or assembly units and dowel devices; - fixed or movable workpiece support; - mechanical, pneumatic, hydraulic or vacuum workpiece clamping; - automatic tool change facilities. This document does not deal with the specific hazards of edge banding equipment fitted to NC boring machines, NC routing machines and NC combined boring/routing machines. This document is only applicable to NC boring machines, NC routing machines and NC combined boring/routing machines which are designed to use milling tools with a cutting circle diameter below 16 mm or milling tools or saw-blades conforming to EN 847-1:2005+A1:2007 and EN 847-2:2001 and boring tools or sanding wheels. This document is not applicable to NC boring machines, NC routing machines and NC combined boring/routing machines which are designed to use grinding wheels. This document is not applicable to single spindle hand fed/integrated fed routing machines. NOTE Single spindle hand fed/integrated fed routing machines are dealt with in EN 848-2:2007+A1:2009. This document does not deal with the specific hazards of ejection through openings on machines where the distance between the work-piece support and the lower edge of the partial enclosure exceeds 400 mm. This document is not applicable to NC boring machines, NC routing machines and NC combined boring/routing machines which are manufactured before the date of its publication as EN.

  Publication

Friday 5th of April 2013

  Cessation

This standard has been withdrawn on 2021-10-02

  Reference

This standard supersedes the "EN 848-3:2007 +A2:2009"

Anyway is still possible use the "EN 848-3:2007 +A2:2009" until April 30th, 2013

  Related Standards

EN 1756-1:2021

Machinery (MD) Directive (2006/42/EC)

Tail lifts - Platform lifts for mounting on wheeled vehicles - Safety requirements - Part 1: Tail lifts for goods

EN 15997:2011/AC:2012

Machinery (MD) Directive (2006/42/EC)

All terrain vehicles (ATVs - Quads) - Safety requirements and test methods

EN 15166:2008

Machinery (MD) Directive (2006/42/EC)

Food processing machinery - Automatic back splitting machines of butchery carcasses - Safety and hygiene requirements

EN 15572:2015

Machinery (MD) Directive (2006/42/EC)

Machines and plants for mining and tooling of natural stone - Safety - Requirements for edge finishing machines

EN 15695-1:2017

Machinery (MD) Directive (2006/42/EC)

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab...

EN 15695-2:2017

Machinery (MD) Directive (2006/42/EC)

Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Fil...

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 848-3:2012 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0