Need help?

EN 1114-3:2001/A1:2008 Standard

wave
Save  

  Keywords:

#see #presses #moulding #machine #document

This standard is superseded by:
  •   EN 1114-3:2019
  •   This standard is no longer addressed in the last official Journal publication of the "2023-08-02 ". This standard is addressed for the last time in the official journal publication of the "2021-03-03"

      Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Wednesday 3rd of March 2021

      Description:

    Plastics and rubber machines - Extruders and extrusion lines - Part 3: Safety requirements for haul-offs

      Purpose

    This European Standard specifies the essential safety requirements for compression moulding machines and transfer moulding machines for the moulding of plastics and/or rubber with a closing movement more than 6 mm. In this document a compression moulding machine or transfer moulding machine as described above is designated by the term “press” (see 3.1). This document deals with all significant hazards, hazardous situations and events relevant to presses, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). The safety requirements are specified for the additional hazards arising from: - shuttle/turn tables used for loading/unloading and/or cooling, - magnetic clamping systems. For other ancillary equipment, as defined in 3.7, that is not part of the press, only the requirements for the interaction between presses and ancillary equipment, especially loading and unloading devices are specified. The following machines or units are excluded: - pneumatic presses for plastic and rubber; - injection moulding machines (see EN 201:2009); - tyre curing machines (see prEN 16474); - presses for curing inner tubes and curing bags; - hydraulic presses for the cold working of metals as covered by EN 693:2001+A2:2011; - mechanical presses for the cold working of metals as covered by EN 692:2005+A1:2009; - pneumatic presses for the cold working of metals as covered by EN 13736:2003+A1:2009; - thermoforming machines (see EN 12409:2008+A1:2011); - reaction injection moulding (RIM) machines (see EN 1612 1:1997+A1:2008); - the extruder of the carousel machine(see EN 1114 1:2011). This standard does not cover: - hazards caused by the processing of materials which may lead to a risk of explosion, see 7.2.2; - the requirements of Directive 94/9/CE concerning equipment and protective systems intended for use in potentially explosive atmospheres; - requirements for the design of exhaust ventilation systems, see 5.3.5 and 7.2.8. This document is not applicable to presses manufactured before the date of its publication as EN.

      Publication

    Tuesday 8th of September 2009

      Cessation

    This standard has been withdrawn on 2021-10-02

      Amendment

    This standard is an amendment for "EN 1114-3:2001"

      Related Standards

    EN 62841-3-1:2014/A11:2017

    Machinery (MD) Directive (2006/42/EC)

    Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular require...

    EN 1870-6:2017

    Machinery (MD) Directive (2006/42/EC)

    Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood

    EN 13001-3-5:2016+A1:2021

    Machinery (MD) Directive (2006/42/EC)

    Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks

    EN 13000:2010+A1:2014

    Machinery (MD) Directive (2006/42/EC)

    Cranes - Mobile cranes

    EN 12984:2005+A1:2010

    Machinery (MD) Directive (2006/42/EC)

    Food processing machinery - Portable and/or hand-guided machines and appliances with mechanically driven cutting tools - Safety an...

    EN 12921-4:2005+A1:2008

    Machinery (MD) Directive (2006/42/EC)

    Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using ha...

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN 1114-3:2001/A1:2008 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0