Need help?

EN 16228-6:2014 Standard

wave
Save  

  Keywords:

#used #requirements #jetting #pressure #application

This standard can be totally or partially supervised by:
  •   EN 16228-6:2014+A1:2021
  •   Directive

    Machinery (MD) Directive (2006/42/EC)

      Last Official Journal reference

    Wednesday 2nd of August 2023

      Description:

    Drilling and foundation equipment - Safety - Part 6: Jetting, grouting and injection equipment

      Purpose

    This European Standard, together with part 1, deals with all significant hazards for jetting, grouting and injection equipment when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer associated with the whole life time of the machine (see Clause 4). The requirements of this part are complementary to the common requirements formulated in EN 16228 1:2014 This document does not repeat the requirements from EN 16228 1:2014, but adds or replaces the requirements for application for jetting, grouting and injection equipment. Rigs for drilling, vibrating, pile driving, to be used for preparing holes for these applications are covered by EN 16228 2:2014 and/or EN 16228 4:2014. Jetting, grouting and injection equipment is used in the preparation, transfer and application of grouting materials used for either: — the improvement of ground condition; or — the filling of voids e.g. around piles or ground anchors. Jetting, grouting and injection equipment are constituted by all equipment and installations, operated by hand or electrically, pneumatically, mechanically or hydraulically powered, necessary for the following: — mixing, storing, measuring and pumping of substances (cement suspension, mortar or chemical liquids/mixtures); — jetting, grouting and injection processes (of/into subsoil) with low, medium or high pressure or vacuum systems; — all types of pressure and wear resistant grout hoses, fittings, quick release coupling with thread or hose connection, ball valves and flexible pipes; — all control systems, electrical or mechanical pressure and flow recorders, for monitoring the grouting; — all jetting, grouting and injection accessories, such as: special tools, lances, rods, sockets, packers, retention clamps and swivel hooks.

      Publication

    Friday 13th of February 2015

      Cessation

    This standard will be withdrawn on 2025-02-02

      Reference

    This standard supersedes the "EN 791:1995 +A1:2009 (EN 996:1995 +A3:2009)"

    Anyway is still possible use the "EN 791:1995 +A1:2009 (EN 996:1995 +A3:2009)" until February 13th, 2015

      Related Standards

    EN 60335-2-48:2003

    Machinery (MD) Directive (2006/42/EC)

    Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toa...

    EN 115-1:2017

    Machinery (MD) Directive (2006/42/EC)

    Safety of escalators and moving walks - Part 1: Construction and installation

    EN ISO 14122-4:2016

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016)

    EN ISO 14123-1:2015

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 1: Principles a...

    EN ISO 14159:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Hygiene requirements for the design of machinery (ISO 14159:2002)

    EN ISO 14738:2008

    Machinery (MD) Directive (2006/42/EC)

    Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:200...

      Stay up to date

    CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

    CELAB performs voluntary inspection activities on technical construction files to check their contents.

    CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

    CLICK HERE TO GET TESTS AND INFO ON THE EN 16228-6:2014 STANDARD

      ACCESS

    Search for a standard
    GO

    Register

    Already a member?
    Login

      OTHER APPLICATIONS

    If you are interested in DO160 tests, you can give a try to our other free of charge software:
    CE-Marking assistant, Version: 1.3.0