Need help?

EN 16719:2018 Standard

wave
Save  

  Keywords:

#european #standard #transport #design #materials

  Directive

Machinery (MD) Directive (2006/42/EC)

  Last Official Journal reference

Thursday 2nd of April 2020

  Description:

Transport platforms

  Purpose

1.1 Temporarily-installed, guided powered platforms with rack and pinion drive, which have an open carrier and hold-to-run controls operated by authorized, trained operators on the carrier. Used for transporting authorised passengers and materials vertically (or along the path 15° maximum of the vertical), at limited speed (max 0,2 m/s), with a minimum offset distance of 500 mm and serving fixed levels on a building or structure for construction related activities including renovation and maintenance. This European Standard does not include a) hydraulic drives for transport platforms, b) wire rope drives for transport platforms, c) chain drives for transport platforms, d) use as a Mast Climbing Work Platform (see EN 1495), e) use as a Goods Hoist (see EN 12158-1), f) use as a Passenger/Goods Hoist (see EN 12159). 1.2 This European Standard identifies hazards as listed in Clause 4 which arise during the various phases in the life of such equipment and describes methods for the elimination or reduction of these hazards when used as intended by the manufacturer. 1.3 This European Standard does not specify the additional requirements for a) operation in severe conditions (e.g. extreme climates, strong magnetic fields), b) lightning protection, c) operation subject to special rules (e.g. potentially explosive atmospheres), d) electromagnetic compatibility (emission, immunity), e) handling of loads the nature of which could lead to dangerous situations (e.g. molten metal, acids/bases, f) radiating materials, fragile loads), g) the use of combustion engines, h) the use of remote controls, i) hazards occurring during manufacture, j) hazards occurring as a result of mobility, k) hazards occurring as a result of being erected over a public road, l) earthquakes, m) noise. 1.4 This European Standard is not applicable to a) builders hoists for materials, b) builders hoists for persons and materials, c) lifts according to EN 81-1:1998, EN 81-2:1998 and EN 81-3:2000, d) inclined hoists according to EN 12158-2:2000, e) work cages suspended from lifting appliances, f) work platforms carried on the forks of fork trucks, g) work platforms, h) funiculars, i) lifts specially designed for military purposes, j) mine lifts, k) theatre elevators, l) special purpose lifts. 1.5 This European Standard deals with the transport platform installation. It includes the base frame and base enclosure but excludes the design of any concrete, hard core, timber or other foundation arrangement. It includes the design of mast ties but excludes the design of anchorage bolts to the supporting structure. It includes the landing gates and their frames but excludes the design of any anchorage fixing bolts to the supporting structure.

  Publication

Thursday 30th of January 2020

  Related Standards

EN 60335-2-36:2002/A11:2012

Machinery (MD) Directive (2006/42/EC)

Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ...

EN ISO 28927-4:2010

Machinery (MD) Directive (2006/42/EC)

Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO 28927-4:2010)

EN ISO 20361:2015

Machinery (MD) Directive (2006/42/EC)

Liquid pumps and pump units - Noise test code - Grades 2 and 3 of accuracy (ISO 20361:2015)

EN ISO 22867:2011

Machinery (MD) Directive (2006/42/EC)

Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration...

EN ISO 22868:2011

Machinery (MD) Directive (2006/42/EC)

Forestry and gardening machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering m...

EN ISO 23125:2015

Machinery (MD) Directive (2006/42/EC)

Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15)

  Stay up to date

CELAB is Notified Body No.2037 for the EMC Directive and Italian office of a Notified Body for the RED Directive.

CELAB performs voluntary inspection activities on technical construction files to check their contents.

CELAB can accomplish all the required tests in order to affix the CE-marking related to EMC, LVD, RED, MDD, machines and many others.

CLICK HERE TO GET TESTS AND INFO ON THE EN 16719:2018 STANDARD

  ACCESS

Search for a standard
GO

Register

Already a member?
Login

  OTHER APPLICATIONS

If you are interested in DO160 tests, you can give a try to our other free of charge software:
CE-Marking assistant, Version: 1.3.0